solar street light system

Interface level standards between digital systems

Sep , 09 2023

Preface When we constrain the FPGA project, we often see such level standards, such as LVCOM18, LVCOS25, LVDS, LVDS25, etc. In fact, these are a series of level standards, in order to have a deeper understanding of the level standards, the following excerpts from the book "The FPGA Way" for the explanation of the level standards to understand. Dual Threshold Standard The so-called dual-threshold s...

more

Selection of types and operating modes of household energy storage systems

Sep , 21 2023

Main types of household light storage systems 01 Off-grid integrated photovoltaic energy storage system It is mainly composed of components, lithium batteries, energy storage inverters, smart meters, power grids, grid-connected loads and off-grid loads. The system has high integration and intelligent control, and can switch working mode according to the situation to meet the needs of users. 02 AC ...

more

The function and operation method of UPS power supply are not affected by voltage interference

Oct , 08 2023

UPS power supply is a type of power protection device mainly used to protect electronic devices (such as computers, servers, etc.) from damage during power outages or voltage instability. The function of UPS power supply: 1.Protect electronic devices from power outages and voltage fluctuations. 2.In the event of a power outage, the UPS power supply can continue to supply power,ensuring the normal ...

more

How to classify UPS power supplies based on their principles and strong software functions

Oct , 08 2023

There are various types of UPS power supplies available in the market today, with output power ranging from 500VA to 4800KVA (multiple units in parallel). UPS power supply can be divided into three categories according to its working principle: backup UPS, online interactive UPS, and online UPS; According to the output waveform, it can be divided into two types: square wave output UPS and sine wav...

more

What is the difference between the 8/20us waveform and the 10/350us waveform in surge protective devices (SPD)

Oct , 08 2023

The surge protector has an important parameter, 8/20us or 10/350us, which many people are unaware of. The main function of the surge protector is to respond to lightning strikes, including direct and induced lightning. The forms of direct lightning and inductive lightning have different energies, and their current waveforms are similar to 10/350us (direct lightning) and 8/20us (inductive lightning...

more

What is the difference between single phase and three phase UPS?

Oct , 16 2023

When purchasing UPS for your business or organization, many factors should be taken into consideration, among which the choice of power supply between single phase UPS and three phase UPS is the foremost one. Though both of the UPS offer consistent backup power for dealing with unexpected situations, they have different roles. Here is a brief introduction of single phase vs three phase for those w...

more

How to calculate the required ups load capacity?

Oct , 19 2023

Measured in “watts”, UPS load capacity is an important factor to consider when choosing a UPS (uninterruptible power supply). It determines how many electronic devices the UPS system can support. This post will tell you how to choose the right UPS with required UPS load capacity in the following four steps. Clarify UPS Measurement Units UPS systems are rated either in kilowatts (kW) or in kilo-vol...

more

Storage PCS topology architecture

Oct , 20 2023

The topology of the Power Conversion System (PCS) of electrochemical energy storage system is closely related to the technical route of the electrochemical energy storage system PCS can operate in the following two states and thus shoulder two important functions: 1. The working state of the rectifier: converts the alternating current of the power grid into direct current when charging the battery...

more

Method for providing the service life of valve-controlled closed lead acid Battery (VRLA)?

Nov , 03 2023

1 Temperature affects battery life: thermal runaway causes temperature rise: Valve-controlled closed lead-acid battery (VRLA) charging when the internal gas recombination itself is an exothermal reaction, so that the battery temperature rises, floating charge flow increases, the gas evolution increases, and the battery temperature rises higher, the battery itself is a "poor liquid", tightly assemb...

more

What are the aspects of battery energy storage system?

Nov , 11 2023

When analyzing the energy storage process, the part of the object or space range drawn out in order to determine the research object is called the energy storage system. It includes energy and matter input and output, energy conversion and storage equipment. Energy storage systems often involve a variety of energy, a variety of equipment, a variety of substances, multiple processes, is a complex e...

more

The role of energy storage system in microgrid

Nov , 16 2023

1, improve the stability of distributed energy Distributed energy, such as solar energy, wind energy, biomass, and other renewable energy, is generally affected by the external environment such as light, temperature, wind, climate, and other factors. The power generation has the characteristics of randomness and instability. When the microgrid is disconnected from the grid and operates independent...

more

Causes and prevention of lead-acid battery bulge

Nov , 25 2023

1. The battery is bulging 1.1 Causes 1) Overcharge 2) Ambient high temperature 3) Thermal runaway 4) Individual monomers in the series circuit are not found in time, resulting in overcharging of other batteries 1.2 Prevention 1) The BSB system is installed to intelligently manage the charging of the battery itself and effectively prevent the overcharging of the battery. 2) Secondly, the BMS system...

more