integrated solar monitoring system

Transfer UPS load by static switch in Parallel ups

Jul , 10 2023

One of the critical aspects of UPS systems is load balancing, and transferring the load between two or more UPS systems can significantly improve the reliability and efficiency of the system. In this blog, we will discuss the transfer of UPS load by using a static switch in parallel UPS. A static switch is an electrically operated switch that provides an automatic transfer of power between two or ...

more

Household storage market and profit model

Aug , 04 2023

1.1 The general trend of new energy has been set, and the energy storage industry is rising New energy generation is unstable, and the demand for energy storage arises. The power system needs to maintain a dynamic balance, and when the power generation is too high, the electric energy needs to be converted into chemical energy or potential energy and other forms of energy to be stored. In the trad...

more

Comparison of N-type and P-type cells for photovoltaic modules

Aug , 18 2023

Photovoltaic cells are classified by substrate material and can be divided into P- and N-type batteries. A P-type battery refers to a battery with a P-type silicon wafer as the substrate, and an N-type battery refers to a battery with an N-type silicon wafer as the substrate. P-type silicon wafers have a simple production process and low cost, while N-type silicon wafers usually have a long life a...

more

What are the characteristics of industrial UPS power supply

Aug , 29 2023

Industrial UPS power supplies need to focus on the ability to operate in high-temperature environments. The design of components must adapt to the operational requirements of the industrial environment, adapt to high temperature and humidity, and also be able to cope with the corrosion of corrosive gases on the system. Under various operating conditions and continuous full load operation, industri...

more

Interface level standards between digital systems

Sep , 09 2023

Preface When we constrain the FPGA project, we often see such level standards, such as LVCOM18, LVCOS25, LVDS, LVDS25, etc. In fact, these are a series of level standards, in order to have a deeper understanding of the level standards, the following excerpts from the book "The FPGA Way" for the explanation of the level standards to understand. Dual Threshold Standard The so-called dual-threshold s...

more

Selection of types and operating modes of household energy storage systems

Sep , 21 2023

Main types of household light storage systems 01 Off-grid integrated photovoltaic energy storage system It is mainly composed of components, lithium batteries, energy storage inverters, smart meters, power grids, grid-connected loads and off-grid loads. The system has high integration and intelligent control, and can switch working mode according to the situation to meet the needs of users. 02 AC ...

more

The function and operation method of UPS power supply are not affected by voltage interference

Oct , 08 2023

UPS power supply is a type of power protection device mainly used to protect electronic devices (such as computers, servers, etc.) from damage during power outages or voltage instability. The function of UPS power supply: 1.Protect electronic devices from power outages and voltage fluctuations. 2.In the event of a power outage, the UPS power supply can continue to supply power,ensuring the normal ...

more

How to classify UPS power supplies based on their principles and strong software functions

Oct , 08 2023

There are various types of UPS power supplies available in the market today, with output power ranging from 500VA to 4800KVA (multiple units in parallel). UPS power supply can be divided into three categories according to its working principle: backup UPS, online interactive UPS, and online UPS; According to the output waveform, it can be divided into two types: square wave output UPS and sine wav...

more

What is the difference between the 8/20us waveform and the 10/350us waveform in surge protective devices (SPD)

Oct , 08 2023

The surge protector has an important parameter, 8/20us or 10/350us, which many people are unaware of. The main function of the surge protector is to respond to lightning strikes, including direct and induced lightning. The forms of direct lightning and inductive lightning have different energies, and their current waveforms are similar to 10/350us (direct lightning) and 8/20us (inductive lightning...

more

What is the difference between single phase and three phase UPS?

Oct , 16 2023

When purchasing UPS for your business or organization, many factors should be taken into consideration, among which the choice of power supply between single phase UPS and three phase UPS is the foremost one. Though both of the UPS offer consistent backup power for dealing with unexpected situations, they have different roles. Here is a brief introduction of single phase vs three phase for those w...

more

How to calculate the required ups load capacity?

Oct , 19 2023

Measured in “watts”, UPS load capacity is an important factor to consider when choosing a UPS (uninterruptible power supply). It determines how many electronic devices the UPS system can support. This post will tell you how to choose the right UPS with required UPS load capacity in the following four steps. Clarify UPS Measurement Units UPS systems are rated either in kilowatts (kW) or in kilo-vol...

more

Storage PCS topology architecture

Oct , 20 2023

The topology of the Power Conversion System (PCS) of electrochemical energy storage system is closely related to the technical route of the electrochemical energy storage system PCS can operate in the following two states and thus shoulder two important functions: 1. The working state of the rectifier: converts the alternating current of the power grid into direct current when charging the battery...

more