China Industrial UPS power supplies,Competitive Price Industrial UPS power supplies

What is the meaning of float charging for intelligent three‐stage charger in battery charger?

Jul , 12 2024

Float charging: Keep constant voltage charging, the charging current continues to decrease, and the battery is charged with maintenance type. When the charging current decreases to the set value or the charging time reaches the set value, the red light of sufficiency will be on, and the time will be about 2H, charging 10% of the power. Ordinary chargers are old‐fashioned chargers, charging, whethe...

more

How to extend the power supply time of uninterruptible power supply (UPS)

Aug , 03 2024

There are two ways to extend the duration of an uninterruptible power supply： 1. Increase battery capacity. According to the length of time required to increase the number of batteries, but this method will cause a relative increase in battery charging time, but also increase the number of corresponding maintenance equipment, increase product size, resulting in an increase in the overall cost of U...

more

Is the uninterrupted host suitable for computers to reduce hard shutdowns

Aug , 17 2024

The best offline intelligent UPS 3000va 1800w backup battery for desktop computers provides complete power protection to protect connected devices from surges, overvoltage, and undervoltage damage. Is the uninterrupted host suitable for computers? Advanced microprocessor control technology enables UPS to maintain high performance and reliability, effectively operating to reduce en...

more

Four operating modes of UPS

Aug , 23 2024

1、Normal operation mode The principle of the power supply system is that when the utility power is normal, the machine will convert the alternating current of the utility power to direct current, and then charge the battery for use when the power is interrupted; it is emphasized here that the power supply system will not only act when the power is out, such as when the voltage is too low or high, ...

more

Classification of DC Power Supplies

Mar , 01 2025

DC regulated power supply classification methods, according to the type of output power supply DC regulated power supply and AC regulated power supply; according to the connection between the regulated circuit and the load DC regulated power supply series regulated power supply and parallel regulated power supply; according to the operating state of the adjustment tube is divided into linear regul...

more

Difference between kVA and kw

Mar , 15 2025

kVA is the unit of apparent power and kw is the unit of active power. In alternating current, apparent power does not indicate the actual power consumed in the circuit, but rather the maximum power that can be supplied or the maximum active power consumed in an alternating current circuit. In the case of active power, it is the power needed to enable the equipment to work properly, such as the ele...

more

Radio Frequency Interference Filters (RFI)

Apr , 03 2025

Chapter 1: Application Scenarios of RFI Filters in Industrial Chargers RFI Filter is a key component for solving high-frequency electromagnetic interference (EMI), which is especially indispensable in high power and high frequency equipment such as industrial chargers. Industrial chargers are often faced with complex electromagnetic environments: fast switching of switching power supplies, high-cu...

more

What Is UPS Input Power Factor and Why It Matters

Apr , 12 2025

Power factor (pf) is the difference between the actual energy consumed in an AC circuit and the apparent power. It will be calculated as a decimal or percentage between 0-1 pf and 0-100%, i.e. 0.9 pF=90%. Meaning of UPS power factor UPS input power factor UPS input power factor is the ratio of UPS input active power to input power. UPS is not only a part of the power supply, but also the load of t...

more

How electrolytic capacitor work for industrial battery charger

May , 16 2025

I. What is electrolytic capacitor: 1. Electrolytic capacitor, as the “energy storage heart” of charger power module, bears the key tasks of filtering, voltage stabilization and transient response. Its large-capacity characteristics (up to tens of thousands of μF) can effectively absorb the pulsating current after rectification, reduce output ripple, and ensure that the charging process is stable a...

more

An Overview of HV Substation Equipment — with Integration of High-Current DC Charging Systems

May , 24 2025

Each operating device in a high-voltage substation serves a vital role. Their shapes and sizes vary depending on their location and purpose, but together they ensure safe, stable, and efficient operation of the entire installation. 1. Switchgear: The Functional Core of a Substation Switchgear consists of various components like circuit breakers, disconnectors, earthing switches, and instrument tra...

more

What are the benefits of high-rate discharge UPS lithium batteries?

Jun , 21 2025

High-Rate Discharge Lithium Battery for UPS: Rapid Backup Power for Critical Applications The primary role of a high-rate discharge lithium battery in an uninterruptible power supply (UPS) system is to deliver a large current output within a short period, ensuring stable operation during sudden power outages or voltage fluctuations. The EverExceed high-voltage UPS lithium battery series is designe...

more

Understanding Sine Wave vs. Square Wave in UPS Systems

Jun , 21 2025

Uninterruptible Power Supplies (UPS) play a crucial role in ensuring the continuity and quality of power for mission-critical applications. One of the most important, yet often overlooked, technical aspects of a UPS system is its output waveform—namely, whether it delivers a sine wave, modified sine wave, or square wave. This waveform directly affects the performance, compatibility, and safety of ...

more

what are you looking for?

blog

blog