English

what are you looking for?

Blog
Critical power

b

home |

Critical power

  • How to maintain the consistency of lithium batteries

    How to maintain the consistency of lithium batteries

    Apr , 19 2025
    1. Balance control of the Battery Management System (BMS) Passive equalization: Through resistor discharge, the energy of high-charge cells is dissipated in the form of heat, making the voltages of each cell tend to be consistent. It is suitable for cost-sensitive scenarios, but the efficiency is relatively low. Active balancing: It transfers the energy of high-charge cells to low-charge cells thr...
    more

  • The advantages of lead-acid tubular plates

    The advantages of lead-acid tubular plates

    Apr , 19 2025
    1、To prevent the active substance from falling off: Tubular plate is in the positive plate on the conductive skeleton set with woven fibre tube, the tube into the active substance. This structure can effectively bind the active substance in the tube, even in the battery charging and discharging process, the plate is subjected to the stress of chemical reaction, the active substance is not easy to ...
    more

  • What Is UPS Input Power Factor and Why It Matters

    What Is UPS Input Power Factor and Why It Matters

    Apr , 12 2025
    Power factor (pf) is the difference between the actual energy consumed in an AC circuit and the apparent power. It will be calculated as a decimal or percentage between 0-1 pf and 0-100%, i.e. 0.9 pF=90%. Meaning of UPS power factor UPS input power factor UPS input power factor is the ratio of UPS input active power to input power. UPS is not only a part of the power supply, but also the load of t...
    more

  • Radio Frequency Interference Filters (RFI)

    Radio Frequency Interference Filters (RFI)

    Apr , 03 2025
    Chapter 1: Application Scenarios of RFI Filters in Industrial Chargers RFI Filter is a key component for solving high-frequency electromagnetic interference (EMI), which is especially indispensable in high power and high frequency equipment such as industrial chargers. Industrial chargers are often faced with complex electromagnetic environments: fast switching of switching power supplies, high-cu...
    more

  • Why battery calibration?

    Why battery calibration?

    Apr , 03 2025
    Definition of Battery Calibration Battery calibration refers to the process of resetting and synchronizing the battery's power management system with the device's software to accurately gauge the battery's charge level and capacity. This procedure involves fully charging the battery, allowing it to drain completely, and then recharging it to recalibrate the device's battery indicator to provide ac...
    more

  • Difference between transformer insulation class and insulation strength

    Difference between transformer insulation class and insulation strength

    Mar , 29 2025
    Insulation level refers to the motor (or transformer) winding insulation material used in the heat resistance level. Motor and transformer insulation materials commonly used in the grade for A, E, B, F, H five. Each insulation level of insulation materials have corresponding limit allowable working temperature (motor or transformer winding the hottest point of temperature). Motor or transformer op...
    more

  • How to choose the right lithium battery

    How to choose the right lithium battery

    Mar , 28 2025
    1. Identify application scenarios The purpose of lithium batteries directly affects parameter selection: Portable devices (mobile phones, drones, cameras): give priority to high energy density (such as ternary lithium batteries) and lightweight. Electric vehicles/power tools: require high discharge rate (C-rate) and long cycle life (such as lithium iron phosphate batteries). Energy storage systems...
    more

  • Advantages of lead-acid colloidal batteries

    Advantages of lead-acid colloidal batteries

    Mar , 28 2025
    1. Long service life: The colloidal electrolyte can form a solid protective layer on the plate, reduce the bending and short circuit of the plate when used under heavy load, delay the softening and shedding of the plate, and make the battery life reach 1.5-2 times that of ordinary lead-acid batteries. 2. High safety: The electrolyte is solid, sealed, and never leaks. There is no acid mist gas prec...
    more

  • Causes of harmonics in rectifier equipment

    Causes of harmonics in rectifier equipment

    Mar , 21 2025
    1. Nonlinear characteristics   The diodes, thyristors and other power electronic devices in rectifier equipment have nonlinear voltammetry characteristics. Take the diode as an example, when the input AC voltage is in positive half circle, the diode is positive and the current can pass through; At the negative half cycle, the diode is reversed off and the current is almost zero. This characte...
    more
first page << 1 ... 8 9 10 11 12 ... 76 >> last page

a total of76 pages

about us
products
Solutions
Support
contact us
Send Message
©2026 Shenzhen EverExceed Industrial Co., Ltd.all rights reserved. | sitemap | Xml | Privacy Policy IPv6 network supported
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact