sebl sebm sebh series nicd batteries

Which batteries are appropriate for low temperature operation?

Aug , 27 2021

One of the biggest threats to batteries is the temperature. It is vital to keep your batteries in conditions that do not affect their chemistry. Unfortunately, getting the right temperature is never easy. Whereas high temperatures are bad, cold temperatures are not good either. Charging a battery above freezing temperature is one of the biggest challenges for European, American and some other coun...

more

How to charge NiCd battery properly?

Aug , 27 2021

NiCd batteries have two charging methods, one is constant voltage (boost +float) and other one is constant current .It is recommended to use Constant Voltage method of charging for Nickel Cadmium Batteries, usually with current limitation to C/5 or C/10. Charging voltages must be regularly checked. To optimized the battery performance, it is necessary to ensure that the voltage is kept into s...

more

What is the pocket plate technology of a NiCd Battery?

Aug , 27 2021

The NiCd battery or Nickel Cadmium battery is a rechargeable battery that uses metallic cadmium for its negative electrode and nickel oxide hydroxide for its positive electrode. For the electrolyte, a potassium hydroxide solution is used. Nickel Cadmium batteries are characterized by their resistance to electrical abuse, high cycle lives, reliability and versatility and have found a wide range of ...

more

What are the best batteries for solar?

Aug , 30 2021

Solar energy works by capturing the sun's energy and turning it into electricity for your home or business. Solar energy is becoming an increasingly popular form of alternative energy around the world. Solar batteries enable us to store more free energy form sun through our panels and buy less from energy supplier, saving money and incresing our independency from national grid. There are some...

more

Lithium battery failure model-explain the phenomenon of lithium evolution in graphite anode: part-3

Nov , 03 2021

During the long-cycle cycle, the reversible capacity of the lithium-ion battery will continue to decrease due to the reduction of active materials, the precipitation of metal lithium, the continuous consumption of electrolyte, the increase of internal resistance and thermal runaway. Among them, the lithium evolution phenomenon of the graphite negative electrode is the most important cause of batte...

more

What are the formulas to do the battery charger sizing calculation?

Nov , 03 2021

From our long experience of providing industrial battery charger solutions to our customers and partners, we have seen that there are some basic questions that are always asked. One of the basic questions we are always asked by our valuable customers is “what are the formulas needed to do the battery charger sizing calculations?” Here we are sharing the basic formulas for your convenience. . CHARG...

more

Things You Must Know Before Buying A Residential Energy Storage Battery

Nov , 09 2021

With the requirement for energy growing by leaps and bounds in all aspects of life, it is wise to save energy for the future, instead of wasting away the excess. This is where a residential energy storage battery comes into the picture. When attached to the grid-based system, the battery stores sustainable energy and supplies it during the times when you cannot gain access to solar power or other ...

more

What is the right duration of Phase 2 of a charging cycle?

Nov , 27 2021

The duration of Phase 1 is determined by the battery’s depth of discharge, the ratio of charger ampacity to battery capacity, and whether there are parasitic DC loads connected to the system. Although the duration of Phase 1 does vary, we are not concerned with this variation since, once the battery capacity, charger output, and DC loads are installed, we have no means to change the duration of Ph...

more

NiCd versus Lead Acid Starter Batteries for Generator Systems

Dec , 10 2021

Apart from a few special applications that use mechanical cranking, such as spring starters, the greatest percentage of generator set systems utilize 12-volt or 24-volt starter motors. For prime power and standby applications, the two most commonly used battery types are lead acid or nickel cadmium (NiCd). This article discusses the differences between NiCd and Lead Acid starter batteries for gene...

more

Characteristics of Lead Acid and Nickel Cadmium Batteries for Generator starting application

Dec , 10 2021

The charger strips electrons from the cathode leaving it with a net positive charge and forces those electrons onto the anode giving it a negative charge. The energy pumped into the cell transforms the active chemicals back to their original state. The generator set industry primarily uses an automatic type battery charger for standby applications. The system designer selects the battery type on i...

more

What is the Life Expectancy of a Lithium Battery for a stationary application?

Dec , 10 2021

One of the key attractions for moving to lithium batteries is the battery life being multiples of what is possible with lead-acid batteries. Yet, with limited operating data in UPS applications available today, it’s natural for potential users to question how long lithium batteries will actually last. To address this question, it’s necessary to first understand how lithium battery packs degrade un...

more

Some frequently asked questions for Batteries-Part 1

Dec , 31 2021

From our long experience of providing battery solutions to our customers and partners, we have seen that there are some basic questions that are always asked. Here we are sharing some of the common questions and their answers regarding the batteries for your convenience. How long will it take before my battery is discharged? This depends on its capacity and the amount of power consumed by the conn...

more

what are you looking for?

blog

blog