China Customized solutions,Competitive Price Customized solutions

What are the installation steps for the voltage stabilizer?

Aug , 22 2022

The voltage stabilizer is composed of voltage stabilizer and constant voltage, control circuit, and servo motor. When the input voltage or load changes, the control circuit performs sampling, comparison and amplification, and then drives the servo motor to rotate, so that the position of the carbon brush of the voltage regulator changes, and the coil turns ratio is automatically adjusted to mainta...

more

Classification of inverters based on wave type (Pure Sine wave)

Aug , 29 2022

Power inverters can be mainly divided into pure sine wave inverters and modified sine wave inverters according to their waveforms. In fact, there is another type - square wave inverter, the earliest inverter, which is rarely seen now. Pure sine wave inverter The pure sine wave inverter outputs true sine wave alternating current without electromagnetic pollution, which is the same or even better th...

more

Fourier Analysis of input current of Single phase controlled bridge rectifier

Aug , 29 2022

While the use of uncontrolled rectifier circuits remains prominent, for some applications, more control and efficiency is necessary. This can be accomplished through the use of a controlled rectifier circuit in which thyristors connected in a full-bridge configuration adjust the average voltage. Each thyristor has a gate that controls when it turns on. With control circuitry these devices can be o...

more

SEI film formation mechanism

Sep , 05 2022

During the formation of the SEI film, various reduction reactions are carried out by the electrolyte solvent, lithium salt, additives, and trace air impurities. This series of reactions is not only affected by the inherent properties of substances such as reduction potential, reduction activation energy, and exchange current density, but also by other factors such as temperature, electrolyte salt ...

more

Overview of the lithium battery formation process

Sep , 05 2022

Lithium- ion battery formation process includes constant current, constant voltage and intelligent charging. The polarization phenomenon of constant current charging is serious, and its initial current is low, the current at the end of charging is high, the charging time is long, the energy waste is serious, and the battery life will be reduced. During constant voltage charging, the current is rel...

more

Advantages and disadvantages of lithium iron phosphate battery and ternary lithium battery

Sep , 05 2022

1. Energy density: The energy density of ternary lithium is about 1.7 times that of lithium iron phosphate, so the volume and weight of ternary lithium batteries will be smaller than those of lithium iron phosphate batteries, and the car load will be smaller. 2. Safety performance: lithium iron phosphate battery will perform better in acupuncture test, and in high temperature environment, the stab...

more

Effect of formation current density on battery performance

Sep , 13 2022

When graphite is used as the negative electrode active material, there are two types of reactions for the formation of SEI films: two-electron reactions, that is, two electrons participate in the reaction at the same time, and it is easier to generate inorganic lithium salt components; single-electron reactions, that is, only need A reaction that can take place when one electron participates, it i...

more

What is open circuit voltage and what is the capacity of a battery?

Oct , 17 2022

What is the nominal voltage? The nominal voltage of the battery refers to the voltage displayed during normal operation. The nominal voltage of the secondary nickel-cadmium nickel-hydrogen battery is 1.2V; the nominal voltage of the secondary lithium battery is 3.6V. What is open circuit voltage? The open circuit voltage refers to the potential difference between the positive and negative electrod...

more

Advantages of combining solar and energy storage

Nov , 08 2022

Grid stability, battery safety and blackout prevention Solar-storage solutions can act as sunshine insurance, allowing stored power to be dispensed when power demand is high (and accompanied by higher prices) and solar generation is low. Aided by these smart technologies, unified solar and storage can also help prevent blackouts, an issue seen from Australia to California, Lebanon to South Africa....

more

What are the main applications of UPS power supply system?

Jan , 11 2023

The first type of UPS system equipment for information equipment is mainly used for the security protection of computer information systems, communication systems, data network centers, etc. in the information industry, IT industry, transportation, financial industry, aerospace industry, etc. The first type of UPS system equipment for information equipment is mainly used for the security protectio...

more

How UPS and generator can become the complete critical power solutions

Apr , 19 2023

How UPS and generator can become the complete critical power solutions with uninterruptible power and backup power supplies？ A UPS can support its critical load during utility power anomalies and blackouts – but only until its battery autonomy expires. Conversely, an adequately-fuelled generator can support the load indefinitely, but needs time to start up and stabilise. Operators of any data cent...

more

From Inconsistency to Reliability: EverExceed’s Lithium Battery Solutions

Aug , 16 2025

Why Inconsistency Happens Lithium iron phosphate (LiFePO₄) battery packs naturally face inconsistency challenges over time. Manufacturing differences: Even with strict process control, slight variations in materials and production steps lead to differences between cells. Usage environment: Temperature, ventilation, and charging/discharging conditions accelerate these differences during operation. ...

more

what are you looking for?

blog

blog