Blog
  • How is ups efficiency calculated?

    How is ups efficiency calculated?

    Dec , 09 2023
    UPS efficiency is a big deal. The more efficient your UPS, the cheaper it is to run. As energy costs continue to increase, we’ve seen that businesses and organisations across multiple sectors are now looking for ways to increase their energy efficiency and subsequently reduce their energy bills. One of the ways to do this is by investing in an efficient uninterruptible power supply (UPS). What is ...
    more
  • Introduction to rack mounted uninterruptible power supply, application scenarios, etc

    Introduction to rack mounted uninterruptible power supply, application scenarios, etc

    Dec , 09 2023
    Rack mounted UPS power supply is a type of power protection device. It is mainly used in data centers, server rooms, communication rooms, banks, hospitals, and other places that require high power reliability. The uninterrupted power supply of UPS can avoid unexpected power outages, voltage fluctuations, and other issues, ensuring the stable operation of equipment. The requirements for UPS power s...
    more
  • What is the difference between UPS linear load and non linear load?

    What is the difference between UPS linear load and non linear load?

    Nov , 29 2023
    AC electrical loads are referred to either as linear or non linear load depending on how they draw current from the mains power supply waveform. Linear Load UPS loads where the voltage and current waveforms are sinusoidal. The current at any time is proportional to voltage. Linear load is: POWER FACTOR IMPROVEMENT CAPACITORS, INDESCENT LAMPS, HEATERS ETC Non Linear Load Applies to those UPS loads ...
    more
  • EMC classification and selection of UPS, using shielded cables

    EMC classification and selection of UPS, using shielded cables

    Nov , 25 2023
    Introduction to UPS and EMC Uninterruptible power supply (UPS), as a constant frequency, stable voltage, pure, and uninterrupted high-quality power supply, is widely used in various places with high requirements for power quality and continuity, such as personal, commercial, light industry, and industrial areas. When selecting UPS for various scenarios mentioned above, the core focus is mainly on ...
    more
  • What is the ups power factor?

    What is the ups power factor?

    Nov , 17 2023
    Power factor (pf) is the difference between actual energy consumed and the apparent powerin an AC circuit. It will calculate as a decimal or percentage between 0-1 pf and 0-100% i.e. 0.9 pF = 90%. UPS input power factor The UPS input power factor is the ratio of UPS input active power to input power. UPS is not only a part of power supply, but also a load on the utility power source. It means the ...
    more
  • What is single phase ups?

    What is single phase ups?

    Nov , 17 2023
    Single phase UPS has a single input and output source to the electrical equipment. With just one sinewave voltage, it only requires two wires to complete the circuit, one conductor and one neutral. Single phase UPS uninterruptible power supplies typically cover requirements up to 30 kVA. They are for servers, telecoms or computer systems, and network switches. Also they are along with any device t...
    more
  • Ground Design

    Ground Design

    Nov , 10 2023
    1、Introduction In the process of circuit design, grounding is a commonplace issue. The grounding method needs to be based on specific usage scenarios, and there is no universal grounding method. In this article, we will explain the essence of grounding issues, which is worth savoring carefully. 2、Classification of grounding The same hardware circuit may also have differences in grounding methods i...
    more
  • Introduction to Data Center Cabinet Head Cabinet

    Introduction to Data Center Cabinet Head Cabinet

    Nov , 03 2023
    The column head cabinet is a cabinet used to allocate and manage one or more columns of cabinets in the same computer room, and has protection functions. In power room, communication equipment room, and large network room, column head cabinet is necessary and also necessary. 1. Basic concept of column head cabinet A column head cabinet is a cabinet located at the top (first position, equivalent to...
    more
  • The working principle and control method of IGBT voltage modification method

    The working principle and control method of IGBT voltage modification method

    Nov , 03 2023
    Unlike the resistance method, the voltage method involves changing the driving voltage during the control phase to control voltage and current overshoot. There are approximately two methods to change the driving voltage. One is to achieve the change by dividing the driving voltage through a resistor, and the other is to change the output signal in the control chip (DSPFPGA), and then convert it in...
    more
first page << 1 ... 11 12 13 14 15 ... 30 >> last page

a total of30 pages

leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact