China VRLA and lithium battery systems,Competitive Price VRLA and lithium battery systems

Important performance of the battery

Sep , 04 2023

1, electrical performance: (1) Rated capacity: 0.5C discharge, single battery discharge time is not less than 2h, battery pack discharge time is not less than 108min (95%); (2) 1C discharge capacity: 1C discharge, single battery discharge time is not less than 57min (95%), battery pack discharge time is not less than 54min (90%); (3) Low temperature discharge capacity: 0.5C discharge at -20℃, the ...

more

Lead-acid battery thermal runaway failure analysis when the battery is in the state of charge

Sep , 04 2023

Lead acid battery thermal runaway fault analysis When the battery is charged: There is a cumulative increase in battery temperature. When the heat accumulates to a certain extent during the warming process, the battery terminal voltage will suddenly decrease, forcing the current to increase suddenly, and the phenomenon of high battery temperature and damage to the battery is called thermal runaway...

more

Interface level standards between digital systems

Sep , 09 2023

Preface When we constrain the FPGA project, we often see such level standards, such as LVCOM18, LVCOS25, LVDS, LVDS25, etc. In fact, these are a series of level standards, in order to have a deeper understanding of the level standards, the following excerpts from the book "The FPGA Way" for the explanation of the level standards to understand. Dual Threshold Standard The so-called dual-threshold s...

more

Effect of temperature on the performance of lead-acid batteries

Sep , 18 2023

What are the effects of temperature on the performance of lead-acid batteries? From the chemical reaction equation of lead-acid batteries, PbO2 is on the positive plate, and Pb is on the negative plate. The electrical and physical properties of these two substances vary very little with temperature, so it can be said that the temperature effect of the discharge performance of lead-acid batteries i...

more

How do lithium batteries screen distribution groups?

Sep , 19 2023

The inconsistency between single batteries often causes problems such as too fast capacity decay and short life during the cycle of battery packs. Improving the consistency of batteries is of great significance to the popularization and application of lithium-ion batteries. 1 Inconsistency analysis Definition of inconsistency The inconsistency of the lithium-ion battery pack means that after the s...

more

Micropore system anatomy of AGM clapboard

Oct , 11 2023

The performance characteristics of VRLA batteries are largely determined by the capillary characteristics of the AGM separator, that is, the ability to keep the micropores in the thickness direction of the separator filled with electrolyte and prevent the electrolyte from drying out and causing delamination. These properties are influenced by the micropore structure, especially the micropore distr...

more

Lithium battery performance key indicators - internal resistance knowledge

Oct , 13 2023

First, the definition and role of internal resistance (1) Definition of internal resistance Internal resistance refers to the resistance encountered by the current passing through the inside of the lithium battery during discharge or charging. It is determined by the conductivity of the material inside the battery, the ion transport rate of the electrolyte, the contact resistance between the elect...

more

What is the difference between single phase and three phase UPS?

Oct , 16 2023

When purchasing UPS for your business or organization, many factors should be taken into consideration, among which the choice of power supply between single phase UPS and three phase UPS is the foremost one. Though both of the UPS offer consistent backup power for dealing with unexpected situations, they have different roles. Here is a brief introduction of single phase vs three phase for those w...

more

How to calculate the required ups load capacity?

Oct , 19 2023

Measured in “watts”, UPS load capacity is an important factor to consider when choosing a UPS (uninterruptible power supply). It determines how many electronic devices the UPS system can support. This post will tell you how to choose the right UPS with required UPS load capacity in the following four steps. Clarify UPS Measurement Units UPS systems are rated either in kilowatts (kW) or in kilo-vol...

more

The role and importance of AGM partitions

Oct , 19 2023

AGM separator and transfer reaction between positive and negative plates Structure and function of partitions The AGM partitions used by VRLA have the following additional functions: Absorb the electrolyte (the third active substance of the battery) so that it does not flow. Provides a relatively large gas transfer hole for oxygen diffusion and thus facilitates the operation of the COC. High ionic...

more

Lithium battery internal resistance - AC resistance and DC resistance

Oct , 27 2023

Resistance is a physical quantity that characterizes the degree of obstruction of circuit elements to current transmission. The internal resistance (internal resistance) of lithium batteries is one of the important indicators to evaluate the performance of batteries. In practical applications, the internal resistance of lithium batteries has three important roles: 1. It can be used to evaluate the...

more

Method for providing the service life of valve-controlled closed lead acid Battery (VRLA)?

Nov , 03 2023

1 Temperature affects battery life: thermal runaway causes temperature rise: Valve-controlled closed lead-acid battery (VRLA) charging when the internal gas recombination itself is an exothermal reaction, so that the battery temperature rises, floating charge flow increases, the gas evolution increases, and the battery temperature rises higher, the battery itself is a "poor liquid", tightly assemb...

more

what are you looking for?

blog

blog