China The use of carbon in batteries,Competitive Price The use of carbon in batteries

The reason why LiFePO4 batteries cannot be charged but can be discharged below 0℃

Jun , 07 2025

Why LiFePO4 Batteries Cannot Be Charged Below 0°C but Can Still Discharge The reason why LiFePO4 (Lithium Iron Phosphate) batteries, such as the EverExceed battery range, cannot be charged below 0°C yet can still discharge lies mainly in their electrochemical characteristics and safety considerations. 1. Why Charging Is Restricted at Low Temperatures Lithium Plating Risk: At sub-zero temperatures,...

more

Understanding Instantaneous Load and Charger Capacity Calculation in Substations

Jun , 07 2025

In modern substations, accurate power system design requires a clear understanding of instantaneous (transient) loads and how they impact equipment sizing, particularly for battery chargers in DC systems. This article breaks down the concept of transient loads, their implications, and how to properly calculate charger capacity under such conditions. 1. What Is an Instantaneous (Transient) Load? A ...

more

What are the benefits of high-rate discharge UPS lithium batteries?

Jun , 21 2025

High-Rate Discharge Lithium Battery for UPS: Rapid Backup Power for Critical Applications The primary role of a high-rate discharge lithium battery in an uninterruptible power supply (UPS) system is to deliver a large current output within a short period, ensuring stable operation during sudden power outages or voltage fluctuations. The EverExceed high-voltage UPS lithium battery series is designe...

more

Understanding Sine Wave vs. Square Wave in UPS Systems

Jun , 21 2025

Uninterruptible Power Supplies (UPS) play a crucial role in ensuring the continuity and quality of power for mission-critical applications. One of the most important, yet often overlooked, technical aspects of a UPS system is its output waveform—namely, whether it delivers a sine wave, modified sine wave, or square wave. This waveform directly affects the performance, compatibility, and safety of ...

more

8 tips to avoid ground loops when dealing with signal level circuits

Jun , 27 2025

Ground loops and signal noise General recommendation is to properly design and implement the facility's grounding system to avoid unwanted involvement of ground loops with the operation of the equipment. This kind of approach can also eliminate the need to consider equipment modifications and to engage in costly diagnostic efforts since most trouble involving common-mode noise is avoided in the si...

more

Single-Phase vs. Three-Phase UPS: Which One is Right for Your Business?

Jul , 05 2025

When selecting an Uninterruptible Power Supply (UPS) for your business or organization, understanding the difference between single-phase and three-phase systems is crucial. Both types provide reliable backup power to ensure your equipment continues running during unexpected power disruptions. However, their functionalities differ significantly, especially in large-scale industrial power applicati...

more

Protecting Digital Substations in a Hostile World: How EverExceed Supports Intelligent Electronics (IEDs)

Jul , 19 2025

In today’s power systems, digital substations have revolutionized control and monitoring with their intelligent electronic devices (IEDs). However, these advanced infrastructures are not immune to threats. In fact, their complexity and sensitivity demand a new level of protection—and that’s where EverExceed comes in. Understanding the Threats to Digital Substations Whether built from the ground up...

more

The Impact of High Temperatures on Lead-Acid Batteries and Recommended Solutions

Jul , 19 2025

Lead-acid batteries are widely used in energy storage, telecom base stations, and UPS systems. However, their performance is significantly affected by ambient temperature—especially under high-temperature conditions, which can lead to rapid degradation and potential safety risks. Below are six key impacts of high temperature on lead-acid batteries and how to address them: 1. Short-Term Capacity Ga...

more

The Hazards of Overcharging Lead-Acid Batteries

Aug , 08 2025

1. Significant Capacity Decline ① During overcharging, excessive chemical reactions occur inside the battery. The active material, lead dioxide, on the positive plate gradually becomes loose and loses its original structural stability, reducing its ability to participate in electrochemical reactions. ② The active material, spongy lead, on the negative plate also experiences a coarsening of particl...

more

Three Steps to EMI Rectification

Aug , 22 2025

Three Steps to EMI Rectification: From Locating Interference Sources to System-Level Noise Reduction Strategies In power system design, EMI problems are like an invisible electromagnetic storm, which can interfere with the normal operation of equipment if you are not careful. For EMI technicians, the rectification process is not only a technical task, but also a game with electromagnetic waves. To...

more

Why EverExceed Ni-Cd Batteries Use Potassium Hydroxide (KOH) as Electrolyte

Aug , 22 2025

When it comes to industrial-grade energy storage, nickel-cadmium (Ni-Cd) batteries remain a trusted choice thanks to their reliability, long service life, and excellent temperature tolerance. A critical factor behind this proven performance is the use of potassium hydroxide (KOH) as the electrolyte. At EverExceed, our advanced Ni-Cd batteries are engineered with optimized KOH formulations to maxim...

more

Safe Storage of Lithium-Ion Batteries | EverExceed

Aug , 29 2025

Lithium-ion batteries are widely used in energy storage, UPS systems, and various industrial applications. To ensure long-term safety and performance, proper storage is essential. EverExceed provides professional guidance on the safe storage of lithium-ion batteries to help customers minimize risks and maintain reliability. Storage Requirements and Recommendations Ambient Temperature dian Optimal:...

more

what are you looking for?

blog

blog