maintenance free nickel cadmium batteries

What is the reason behind the thermal runaway phenomena of the VRLA battery?

Aug , 27 2021

Thermal runaway is a phenomenon where the current flowing through the cell or battery on charge or overcharge causes the cell temperature to rise, which increases the current with a further rise in temperature. The appropriate charge voltage depends on the battery temperature (see below tables). A warmer battery requires a reduced voltage. If the voltage is not reduced, current accepted by the bat...

more

How does a battery recharge?

Aug , 27 2021

The process is the same for all types of lead-acid batteries: flooded, gel and AGM. The actions that take place during discharge are the reverse of those that occur during charge. The discharged material on both plates is lead sulfate (PbSO4). When a charging voltage is applied, charge flow occurs. Electrons move in the metal parts; ions and water molecules move in the electrolyte. Chemical reacti...

more

Why does temperature have such a dramatic effect on VRLA batteries?

Aug , 27 2021

Temperature is a major factor in battery performance, shelf life, charging and voltage control. At higher temperatures there is dramatically more chemical activity inside a battery than at lower temperatures. The following charts graphically illustrate this fact. Typical Self-Discharge of VRLA Batteries at Different Temperatures AGM Charge and Float Voltages at Various Temperature Ranges Gel Charg...

more

AGM VS GEL VS FLOODED VRLA batteries- Advantages and Disadvantages of them

Aug , 27 2021

In the following we have tried to shortlist some advantages and disadvantages of the AGM batteries, GEL batteries and Flooded VRLA batteries. Gelled Electrolyte Advantages: • Totally maintenance-free • Air transportable • Spill proof/ leak proof • No corrosion • Superior deep cycle life • Installs upright or on side (side installation may lose about 10% capacity) • Ve...

more

What to do when you receive your VRLA batteries?

Aug , 27 2021

Preparation for System Installation The installation of the battery system involves a series of activities from planning and initial receipt through final checkout and warranty registration. As part of this preparation activity the installer should develop a system schematic diagram which identifies how the individual batteries are to be placed on the rack, interconnected and numbered. The cabling...

more

Safety concerns for 12V VRLA batteries installation

Aug , 27 2021

Installation and servicing of the 12V VRLA battery should only be performed and supervised by personnel knowledgeable of lead acid batteries and required personal and equipment safety precautions. Keep unauthorized personnel away from the batteries and installation activity. Electrical Hazards Battery systems present a risk of electrical shock and high short circuit currents. The followi...

more

Why Energy storage batteries are vital for healthcare?

Aug , 27 2021

The social determinants of health are the conditions in which people are born, grow, live, work and age. It is they that are mostly responsible for health injustices around the world. Something that is not widely considered to be a factor within the social determinants of health, but most certainly should be is electricity. There are a vast number of patients that rely on medical equipment every d...

more

Which batteries are appropriate for low temperature operation?

Aug , 27 2021

One of the biggest threats to batteries is the temperature. It is vital to keep your batteries in conditions that do not affect their chemistry. Unfortunately, getting the right temperature is never easy. Whereas high temperatures are bad, cold temperatures are not good either. Charging a battery above freezing temperature is one of the biggest challenges for European, American and some other coun...

more

What are the Advantages and limitations of NiCd batteries?

Aug , 27 2021

The NiCd batteries prefer fast charge to slow charge and pulse charge to DC charge. All other chemistries prefer a shallow discharge and moderate load currents. The NiCd is a strong and silent worker; hard labor poses no problem. In fact, the NiCd is the one of the best battery type that performs well under rigorous working conditions. It does not like to be pampered by sitting in charge...

more

What is the pocket plate technology of a NiCd Battery?

Aug , 27 2021

The NiCd battery or Nickel Cadmium battery is a rechargeable battery that uses metallic cadmium for its negative electrode and nickel oxide hydroxide for its positive electrode. For the electrolyte, a potassium hydroxide solution is used. Nickel Cadmium batteries are characterized by their resistance to electrical abuse, high cycle lives, reliability and versatility and have found a wide range of ...

more

What are the best batteries for solar?

Aug , 30 2021

Solar energy works by capturing the sun's energy and turning it into electricity for your home or business. Solar energy is becoming an increasingly popular form of alternative energy around the world. Solar batteries enable us to store more free energy form sun through our panels and buy less from energy supplier, saving money and incresing our independency from national grid. There are some...

more

Five golden rules for Smarter TCO analysis for Telecom application, Rule# 1

Aug , 31 2021

EverExceed has drawn on a long field experience in supplying batteries for telecom applications to identify Five Golden Rules for a TCO analysis that will result in a fully informed smart decision. These five golden rules will be discussed in this forum in a weekly series. Today we are going to describe Rule number 1. Rule 1: Know your current spending At each project stage you must iden...

more

what are you looking for?

blog

blog