how to store lithium batteries for a long time

Causes of harmonics in rectifier equipment

Mar , 21 2025

1. Nonlinear characteristics The diodes, thyristors and other power electronic devices in rectifier equipment have nonlinear voltammetry characteristics. Take the diode as an example, when the input AC voltage is in positive half circle, the diode is positive and the current can pass through; At the negative half cycle, the diode is reversed off and the current is almost zero. This characte...

more

Advantages of lead-acid colloidal batteries

Mar , 28 2025

1. Long service life: The colloidal electrolyte can form a solid protective layer on the plate, reduce the bending and short circuit of the plate when used under heavy load, delay the softening and shedding of the plate, and make the battery life reach 1.5-2 times that of ordinary lead-acid batteries. 2. High safety: The electrolyte is solid, sealed, and never leaks. There is no acid mist gas prec...

more

How to choose the right lithium battery

Mar , 28 2025

1. Identify application scenarios The purpose of lithium batteries directly affects parameter selection: Portable devices (mobile phones, drones, cameras): give priority to high energy density (such as ternary lithium batteries) and lightweight. Electric vehicles/power tools: require high discharge rate (C-rate) and long cycle life (such as lithium iron phosphate batteries). Energy storage systems...

more

Difference between transformer insulation class and insulation strength

Mar , 29 2025

Insulation level refers to the motor (or transformer) winding insulation material used in the heat resistance level. Motor and transformer insulation materials commonly used in the grade for A, E, B, F, H five. Each insulation level of insulation materials have corresponding limit allowable working temperature (motor or transformer winding the hottest point of temperature). Motor or transformer op...

more

What Is UPS Input Power Factor and Why It Matters

Apr , 12 2025

Power factor (pf) is the difference between the actual energy consumed in an AC circuit and the apparent power. It will be calculated as a decimal or percentage between 0-1 pf and 0-100%, i.e. 0.9 pF=90%. Meaning of UPS power factor UPS input power factor UPS input power factor is the ratio of UPS input active power to input power. UPS is not only a part of the power supply, but also the load of t...

more

The advantages of lead-acid tubular plates

Apr , 19 2025

1、To prevent the active substance from falling off: Tubular plate is in the positive plate on the conductive skeleton set with woven fibre tube, the tube into the active substance. This structure can effectively bind the active substance in the tube, even in the battery charging and discharging process, the plate is subjected to the stress of chemical reaction, the active substance is not easy to ...

more

How electrolytic capacitor work for industrial battery charger

May , 16 2025

I. What is electrolytic capacitor: 1. Electrolytic capacitor, as the “energy storage heart” of charger power module, bears the key tasks of filtering, voltage stabilization and transient response. Its large-capacity characteristics (up to tens of thousands of μF) can effectively absorb the pulsating current after rectification, reduce output ripple, and ensure that the charging process is stable a...

more

Calculation of the heat generation of lithium batteries

May , 24 2025

The calculation of heat generation of lithium batteries is an important part of battery thermal management, involving multiple heat sources. The following are the detailed calculation methods and steps: 1. Main source of heat The heat generation of lithium batteries mainly comes from the following parts: Joule heat (Qj) : The heat generated when current passes through the internal resistance of a ...

more

The reason why LiFePO4 batteries cannot be charged but can be discharged below 0℃

Jun , 07 2025

Why LiFePO4 Batteries Cannot Be Charged Below 0°C but Can Still Discharge The reason why LiFePO4 (Lithium Iron Phosphate) batteries, such as the EverExceed battery range, cannot be charged below 0°C yet can still discharge lies mainly in their electrochemical characteristics and safety considerations. 1. Why Charging Is Restricted at Low Temperatures Lithium Plating Risk: At sub-zero temperatures,...

more

What are the differences between energy storage battery management systems and power battery management systems?

Jun , 13 2025

The energy storage battery management system (BMS) and the power battery BMS are very similar in overall structure and core functions, but due to different application scenarios, there are obvious differences between the two in design logic, communication protocol, hardware structure, etc. Especially in high-security and high-scalability energy storage systems represented by EverExceed, BMS not on...

more

What are the benefits of high-rate discharge UPS lithium batteries?

Jun , 21 2025

High-Rate Discharge Lithium Battery for UPS: Rapid Backup Power for Critical Applications The primary role of a high-rate discharge lithium battery in an uninterruptible power supply (UPS) system is to deliver a large current output within a short period, ensuring stable operation during sudden power outages or voltage fluctuations. The EverExceed high-voltage UPS lithium battery series is designe...

more

Protecting Digital Substations in a Hostile World: How EverExceed Supports Intelligent Electronics (IEDs)

Jul , 19 2025

In today’s power systems, digital substations have revolutionized control and monitoring with their intelligent electronic devices (IEDs). However, these advanced infrastructures are not immune to threats. In fact, their complexity and sensitivity demand a new level of protection—and that’s where EverExceed comes in. Understanding the Threats to Digital Substations Whether built from the ground up...

more

what are you looking for?

blog

blog