how to store lithium batteries for a long time

The difference between energy storage converter and grid-connected inverter

Apr , 26 2024

Energy Storage Converter Energy storage converters (PCS), also known as "bi-directional energy storage inverters", are the core components of the two-way flow of electricity between the energy storage system and the grid, and are used to control the charging and discharging processes of the battery, and to perform the conversion of AC and DC currents. In the absence of grid, it can directly supply...

more

Causes, effects and measures of common problems of photovoltaic modules

Apr , 26 2024

First. Excessively high/low temperature Excessively high or low PV module temperatures can negatively affect the performance of the PV power system. The following are the causes and effects as well as the corresponding measures: 1. Causes of excessive temperature: solar radiation, heat conduction, shadow coverage, etc. Impact: Reduces the conversion efficiency of the module. Excessive temperature ...

more

How Low Frequency UPS Safeguards Critical Information

May , 11 2024

What is a Low Frequency UPS? A Low Frequency Online UPS is a sophisticated power protection device that utilizes double conversion technology to provide continuous and clean power to connected equipment. Unlike traditional Offline UPS, where the load is directly powered by the mains until a power failure occurs, it continuously powers the load through an inverter, ensuring a seamless transition be...

more

Lead-acid battery failure model

May , 11 2024

The most common failure modes are: - Softening or shedding of the active material. During discharge the lead oxide (PbO2) of the positive plate is transformed into lead sulfate (PbSO4), and back to lead oxide during charging. Frequent cycling will reduce cohesion of the positive plate material due to the higher volume of lead sulfate compared to lead oxide. Corrosion...

more

Inverter common fault contents and solutions

May , 11 2024

As an important component of the entire power plant, inverters can detect almost all power plant parameters for both DC components and grid connected equipment. If there is an abnormality, the health status of the supporting equipment in the power station can be checked through the feedback information from the inverter. Below are some common fault information and handling methods for photovoltaic...

more

A Brief Introduction To Filter Circuits

May , 25 2024

In the rectifier filter circuit, there are two parts of the circuit altogether, respectively the rectifier circuit and the filter circuit, the functions of the two are different, the function of the rectifier circuit is to convert the sine wave AC voltage, and the function of the filter circuit is to convert the unidirectional ripple voltage, and the functions of the two parts of the circuit work ...

more

Commonly used industrial communication protocols

May , 31 2024

1、Modbus protocol (1) Modbus packet type Modbus protocol is an application-layer message transmission protocol that can be transmitted on various media, and the transmission mode is divided into three types: ASCII, RTU (Remote Terminal Control System), and TCP. There are multiple versions of the Modbus protocol for serial ports, but the following three are the most common: Modbus-RTU: In thi...

more

Advantages of Nickel-Cadmium Batteries

May , 31 2024

Ni-Cd batteries have been around nearly as long as lead-acid. Commercial products have been available since around 19007. Pocket plate designs are typically used for long to high current types, while fiber plates are used for extremely high current short demand applications like engine starting. While Ni-Cd batteries typically cost many times what a comparable lead-acid does, their characte...

more

What is a nickel-cadmium battery

May , 31 2024

1. Working principle of nickel-cadmium battery Nickel-cadmium batteries are rechargeable batteries that convert chemical energy into electricity through REDOX reactions. It consists of a negative electrode (the negative material is Cd), a positive electrode (the positive material is NiOOH), and an electrolyte (the main component is KOH). 2. Features of nickel-cadmium batteries Long cycle life; Wid...

more

Air cooling and heat dissipation design of industrial and commercial energy storage system

Jun , 14 2024

1 Air cooling and heat dissipation design of industrial and commercial energy storage system Air cooling is the use of air as a heat exchange medium, the use of air to circulate in the battery pack, the use of the temperature difference between the battery module and the air for heat transfer, generally divided into passive air cooling and active air cooling. The main factors affecting its cooling...

more

Industrial and commercial energy storage system liquid cooling design

Jun , 14 2024

1. Industrial and commercial energy storage system liquid cooling design For the high-rate charging and discharging process of large-scale battery packs, the cooling capacity of air cooling system can not meet the heat dissipation demand of battery packs. Liquid has a higher specific heat capacity and higher thermal conductivity than air, and the liquid cooling cooling speed is faster, which has a...

more

Maximum power point tracking algorithm for photovoltaic power generation

Jun , 22 2024

1. Introduction Photovoltaic power generation is a technology that uses solar energy to convert light energy into electricity. In the photovoltaic power generation system, in order to obtain the maximum power generation power, it is necessary to track the change of solar radiation intensity in real time, and adjust the working state of the photovoltaic module to keep near the maximum power point. ...

more

what are you looking for?

blog

blog