high voltage lithium energy storage systems

Lithium battery capacity loss cause analysis

Jun , 21 2023

Lithium-ion batteries are the fastest-developing secondary batteries after cadmium-nickel and nickel-hydrogen batteries. Its high-energy properties make its future look bright. However, lithium-ion batteries are not perfect, and their biggest problem is the stability of their charge-discharge cycle. This paper summarizes and analyzes the possible causes of capacity attenuation of Li-ion batteries,...

more

7 Factors to Examine While Choosing a Lithium-Ion Battery Charger

Jul , 20 2023

From confirming an acceptable input voltage to features like protection design and safe charging mode, these factors can help you select the right lithium-ion battery charger 1. Acceptable Input Voltage An input higher than the voltage sustenance capacity of the charger may cause damage to its internal components. Most countries use a battery charger design of the universal global voltage 110-230V...

more

Fault Analysis and Handling Methods of DC Screen High Frequency Switching Power Supply Module

Jul , 20 2023

Ⅰ、Protection of high-frequency power module 1）. High frequency power module AC input overvoltage, undervoltage, and overheating will cause charging module protection. Please confirm according to the fault code; 2）. The cabinet is equipped with glass doors or is airtight, which may cause overheating protection of high-frequency modules; 3）. If the ambient temperature in the computer room is too hig...

more

Explanation of power terms related to UPS power supply

Jul , 28 2023

Transient recovery time: The time required for the output voltage to recover to the specified range when the load suddenly changes (0-100%, 100% -0%), usually in milliseconds (ms). Filter: A device used to eliminate noise, filtering the input or output to obtain pure alternating current. Shielding: A means of isolating and blocking electromagnetic radiation using physical principles...

more

Household storage market and profit model

Aug , 04 2023

1.1 The general trend of new energy has been set, and the energy storage industry is rising New energy generation is unstable, and the demand for energy storage arises. The power system needs to maintain a dynamic balance, and when the power generation is too high, the electric energy needs to be converted into chemical energy or potential energy and other forms of energy to be stored. In the trad...

more

The Role of AC Capacitors in High Speed Circuits

Aug , 18 2023

1、Introduction For low-frequency circuits, resistors and capacitors can be analyzed as ideal devices. However, in high-frequency circuits, these two devices will not be "ideal". Today, our main discussion is about the issue of AC capacitors, which are commonly known as AC coupling capacitors. Their main function is to filter out the DC component of the signal, which is symmetrical about the X-axis...

more

Lithium-ion battery terms explained

Aug , 18 2023

I. Battery voltage (V) 1. Open circuit voltage (OCV) The voltage of the lithium battery when it is not connected to an external circuit or load can generally be tested with a multimeter. 2. Operating voltage (WV) The potential difference between the positive and negative terminals of the battery under applied load, that is, when there is current flowing through the battery in the circuit. When the...

more

What are the characteristics of industrial UPS power supply

Aug , 29 2023

Industrial UPS power supplies need to focus on the ability to operate in high-temperature environments. The design of components must adapt to the operational requirements of the industrial environment, adapt to high temperature and humidity, and also be able to cope with the corrosion of corrosive gases on the system. Under various operating conditions and continuous full load operation, industri...

more

Important performance of the battery

Sep , 04 2023

1, electrical performance: (1) Rated capacity: 0.5C discharge, single battery discharge time is not less than 2h, battery pack discharge time is not less than 108min (95%); (2) 1C discharge capacity: 1C discharge, single battery discharge time is not less than 57min (95%), battery pack discharge time is not less than 54min (90%); (3) Low temperature discharge capacity: 0.5C discharge at -20℃, the ...

more

Interface level standards between digital systems

Sep , 09 2023

Preface When we constrain the FPGA project, we often see such level standards, such as LVCOM18, LVCOS25, LVDS, LVDS25, etc. In fact, these are a series of level standards, in order to have a deeper understanding of the level standards, the following excerpts from the book "The FPGA Way" for the explanation of the level standards to understand. Dual Threshold Standard The so-called dual-threshold s...

more

How to select an inductor

Sep , 16 2023

Inductors - also known as chokes, reactors, and dynamic reactors.Together with capacitors and resistors, they are known as the three major passive components, and relay containers and resistors have rapidly developed into chip based components. Self induction phenomenon: The electromagnetic induction phenomenon that occurs when the current flowing through the conductor itself changes. When a coil ...

more

How do lithium batteries screen distribution groups?

Sep , 19 2023

The inconsistency between single batteries often causes problems such as too fast capacity decay and short life during the cycle of battery packs. Improving the consistency of batteries is of great significance to the popularization and application of lithium-ion batteries. 1 Inconsistency analysis Definition of inconsistency The inconsistency of the lithium-ion battery pack means that after the s...

more

what are you looking for?

blog

blog