China frequently asked questions about Batteries,Competitive Price frequently asked questions about Batteries

Influence of lithium analysis on battery capacity

Jun , 27 2024

I. Introduction The phenomenon of lithium evolution is an important problem affecting the capacity of lithium batteries. This article will discuss the impact of lithium analysis on battery capacity with you in detail, and analyze its causes and solutions. Second, the impact of lithium on battery capacity 1. Loss of active lithium ions Lithium evolution causes some of the lithium ions to form lithi...

more

Analysis and application of charge and discharge curve of lithium battery

Jun , 27 2024

Abstract: In this paper, the analysis method of charge and discharge curve of lithium battery is introduced in detail, including charge efficiency, discharge characteristics, capacity evaluation, internal resistance evaluation and cycle life evaluation. Through the interpretation of the charge and discharge curve, the performance and characteristics of lithium batteries can be deeply understood, w...

more

The characteristics and principle analysis of internal resistance of lithium battery

Jul , 12 2024

The internal resistance of the battery is one of the most important characteristic parameters of the battery, which is an important parameter to characterize the battery life and the operating state of the battery, and an important symbol to measure the difficulty of the transmission of electrons and ions in the electrode. The internal resistance also reflects the health of the battery. The intern...

more

Effect of electrolyte density and discharge on lead-acid batteries

Nov , 29 2024

(1) Electrolyte density under different geographical and climatic strips. Whether the electrolyte density is high or low, it is necessary to make a specific analysis for the specific situation. Winter temperature is low, the viscosity of the electrolyte is large, it is not easy to penetrate the inside of the plate, the end voltage and capacity of the battery will decline, especially in the strong ...

more

Irreversible lithium evolution of LiFePO4 batteries at low temperatures and its effect on battery performance degradation

Dec , 07 2024

Lithium evolution is the main failure problem faced by lithium-ion batteries during low temperature charging. Due to the low diffusion rate of lithium ions in the solid phase of graphite particles and in the liquid phase of the electrolyte at low temperatures, the negative polarization increases during charging and lithium evolution occurs, and the precipitated lithium metal is divided into revers...

more

The principle of maintenance-free lead-acid batteries is based on the following aspects

Mar , 07 2025

1、Basic Electrochemical Principles The charging and discharging process of maintenance-free lead-acid batteries is based on electrochemical redox reactions. When discharging, metal lead is the negative pole, the oxidation reaction occurs, the electrode reaction formula is Pb +SO42-===PbSO4+ 2e-; lead dioxide is the positive pole, the reduction reaction occurs, the electrode reaction formula is PbO...

more

Advantages of lead-acid colloidal batteries

Mar , 28 2025

1. Long service life: The colloidal electrolyte can form a solid protective layer on the plate, reduce the bending and short circuit of the plate when used under heavy load, delay the softening and shedding of the plate, and make the battery life reach 1.5-2 times that of ordinary lead-acid batteries. 2. High safety: The electrolyte is solid, sealed, and never leaks. There is no acid mist gas prec...

more

How to choose the right lithium battery

Mar , 28 2025

1. Identify application scenarios The purpose of lithium batteries directly affects parameter selection: Portable devices (mobile phones, drones, cameras): give priority to high energy density (such as ternary lithium batteries) and lightweight. Electric vehicles/power tools: require high discharge rate (C-rate) and long cycle life (such as lithium iron phosphate batteries). Energy storage systems...

more

Calculation of the heat generation of lithium batteries

May , 24 2025

The calculation of heat generation of lithium batteries is an important part of battery thermal management, involving multiple heat sources. The following are the detailed calculation methods and steps: 1. Main source of heat The heat generation of lithium batteries mainly comes from the following parts: Joule heat (Qj) : The heat generated when current passes through the internal resistance of a ...

more

The reason why LiFePO4 batteries cannot be charged but can be discharged below 0℃

Jun , 07 2025

Why LiFePO4 Batteries Cannot Be Charged Below 0°C but Can Still Discharge The reason why LiFePO4 (Lithium Iron Phosphate) batteries, such as the EverExceed battery range, cannot be charged below 0°C yet can still discharge lies mainly in their electrochemical characteristics and safety considerations. 1. Why Charging Is Restricted at Low Temperatures Lithium Plating Risk: At sub-zero temperatures,...

more

The Impact of High Temperatures on Lead-Acid Batteries and Recommended Solutions

Jul , 19 2025

Lead-acid batteries are widely used in energy storage, telecom base stations, and UPS systems. However, their performance is significantly affected by ambient temperature—especially under high-temperature conditions, which can lead to rapid degradation and potential safety risks. Below are six key impacts of high temperature on lead-acid batteries and how to address them: 1. Short-Term Capacity Ga...

more

The Hazards of Overcharging Lead-Acid Batteries

Aug , 08 2025

1. Significant Capacity Decline ① During overcharging, excessive chemical reactions occur inside the battery. The active material, lead dioxide, on the positive plate gradually becomes loose and loses its original structural stability, reducing its ability to participate in electrochemical reactions. ② The active material, spongy lead, on the negative plate also experiences a coarsening of particl...

more

what are you looking for?

blog

blog