China energy power,Competitive Price energy power

Maximum power point tracking algorithm for photovoltaic power generation

Jun , 22 2024

1. Introduction Photovoltaic power generation is a technology that uses solar energy to convert light energy into electricity. In the photovoltaic power generation system, in order to obtain the maximum power generation power, it is necessary to track the change of solar radiation intensity in real time, and adjust the working state of the photovoltaic module to keep near the maximum power point. ...

more

Advantages and disadvantages of constant voltage and current power supply

Jul , 06 2024

The advantages of constant voltage and current power supply include flexibility, stability, protection function, adjustability, and high efficiency, while the disadvantages mainly include high cost, large volume, thermal management requirements, and response time. 1. Advantages: a. Flexibility: A constant voltage and current power supply can provide stable current or voltage output as needed, suit...

more

Explanation of terms related to UPS power supply

Jul , 06 2024

Transient Recovery Time: The time it takes for the output voltage to return to the specified range when there is a sudden change in load (0‐100%, 100%‐0), usually on the order of seconds (ms). Filter: a device used to eliminate noise, the input or output filtered to obtain a pure contention of the alternating current. Shielding: The use of physical principles, used to isolate the electromagnetic r...

more

Industrial and commercial energy storage liquid cooling and air conditioning refrigeration comparison

Feb , 28 2025

A detailed comparison of liquid cooling and air conditioning refrigeration technologies in industrial and commercial energy storage systems, covering many aspects such as working principle, performance, cost, and maintenance: 1. Working principle Liquid cooling system How it works: Circulate inside or outside the battery pack through a liquid medium (such as water, glycol solution, or special cool...

more

Classification of DC Power Supplies

Mar , 01 2025

DC regulated power supply classification methods, according to the type of output power supply DC regulated power supply and AC regulated power supply; according to the connection between the regulated circuit and the load DC regulated power supply series regulated power supply and parallel regulated power supply; according to the operating state of the adjustment tube is divided into linear regul...

more

Difference between kVA and kw

Mar , 15 2025

kVA is the unit of apparent power and kw is the unit of active power. In alternating current, apparent power does not indicate the actual power consumed in the circuit, but rather the maximum power that can be supplied or the maximum active power consumed in an alternating current circuit. In the case of active power, it is the power needed to enable the equipment to work properly, such as the ele...

more

What Is UPS Input Power Factor and Why It Matters

Apr , 12 2025

Power factor (pf) is the difference between the actual energy consumed in an AC circuit and the apparent power. It will be calculated as a decimal or percentage between 0-1 pf and 0-100%, i.e. 0.9 pF=90%. Meaning of UPS power factor UPS input power factor UPS input power factor is the ratio of UPS input active power to input power. UPS is not only a part of the power supply, but also the load of t...

more

What are the differences between energy storage battery management systems and power battery management systems?

Jun , 13 2025

The energy storage battery management system (BMS) and the power battery BMS are very similar in overall structure and core functions, but due to different application scenarios, there are obvious differences between the two in design logic, communication protocol, hardware structure, etc. Especially in high-security and high-scalability energy storage systems represented by EverExceed, BMS not on...

more

8 tips to avoid ground loops when dealing with signal level circuits

Jun , 27 2025

Ground loops and signal noise General recommendation is to properly design and implement the facility's grounding system to avoid unwanted involvement of ground loops with the operation of the equipment. This kind of approach can also eliminate the need to consider equipment modifications and to engage in costly diagnostic efforts since most trouble involving common-mode noise is avoided in the si...

more

From Inconsistency to Reliability: EverExceed’s Lithium Battery Solutions

Aug , 16 2025

Why Inconsistency Happens Lithium iron phosphate (LiFePO₄) battery packs naturally face inconsistency challenges over time. Manufacturing differences: Even with strict process control, slight variations in materials and production steps lead to differences between cells. Usage environment: Temperature, ventilation, and charging/discharging conditions accelerate these differences during operation. ...

more

Understanding Compact Substations: Structure, Components, and EverExceed’s Smart Solutions

Aug , 16 2025

1. Growing Demand for Power – The Role of Substations In today’s rapidly developing world, electricity demand is increasing at an unprecedented pace. Power generation plants — whether hydroelectric, thermal, or nuclear — are often located far from the main load centers due to geographical and resource constraints. To ensure reliable energy delivery, high-voltage transmission networks carry electri...

more

Three Steps to EMI Rectification

Aug , 22 2025

Three Steps to EMI Rectification: From Locating Interference Sources to System-Level Noise Reduction Strategies In power system design, EMI problems are like an invisible electromagnetic storm, which can interfere with the normal operation of equipment if you are not careful. For EMI technicians, the rectification process is not only a technical task, but also a game with electromagnetic waves. To...

more

what are you looking for?

blog

blog