English

what are you looking for?

Blog
blog

b

home |

blog

  • Wide Temperature Telecom Power Supply: Reliable Power Solution for Harsh Outdoor Base Station Environments

    Wide Temperature Telecom Power Supply: Reliable Power Solution for Harsh Outdoor Base Station Environments

    Sep , 27 2026
    Quick Answer Outdoor base stations operate in diverse environments, from extremely cold regions to high-temperature and high-humidity areas. A standard indoor power supply may not withstand these conditions for long periods. A wide temperature telecom power supply is designed with low-temperature startup capability, high-temperature derating control, condensation protection, intelligent cooling, a...
    more

  • Top 10 Factors to Consider When Choosing an Energy Storage System

    Top 10 Factors to Consider When Choosing an Energy Storage System

    Sep , 28 2026
    How to Select a Safe, Reliable, and Cost-Effective ESS Solution As energy storage systems become increasingly important for residential, commercial, industrial, and renewable energy applications, selecting the right ESS requires careful evaluation of battery technology, system design, safety features, and long-term performance. With over 20 years of battery manufacturing experience and 10+ years o...
    more

  • Why Does the Main Breaker Trip First? Understanding Selective Protection in DC Distribution Systems

    Why Does the Main Breaker Trip First? Understanding Selective Protection in DC Distribution Systems

    Oct , 09 2026
    Quick Answer When a branch short circuit causes the main breaker to trip first, the problem is not necessarily that the breaker is too small or too large. A more common cause is poor selectivity and coordination between upstream and downstream protection devices. A well-designed DC distribution system should isolate a fault as close to its location as possible. Ideally, a short circuit on one bran...
    more

  • 48V Telecom Power System: How Long Can a Base Station Operate During a Power Outage?

    48V Telecom Power System: How Long Can a Base Station Operate During a Power Outage?

    Oct , 16 2026
    When the grid fails, a telecom base station must continue supplying power to keep network services available. But how long can it actually operate without utility power? The answer depends on several factors, including the site's power consumption, battery capacity, battery condition, and the configuration of the telecom power system. A reliable 48V telecom power system does more than provide back...
    more

  • Lifecycle Management of UPS Batteries for High-Intensity AI Computing

    Lifecycle Management of UPS Batteries for High-Intensity AI Computing

    Oct , 16 2026
    As AI computing continues to expand in scale and intensity, power reliability has become a defining factor for the stability of AI data centers. In AIDC, UPS lithium batteries are no longer passive backup components—they operate continuously under high stress and must support dynamic, high-density computing workloads. Effective lifecycle management of UPS batteries is therefore essential for...
    more

  • Why Is Your Battery Still Not Fully Charged When the Industrial Battery Charger Reaches Its Voltage Setpoint?

    Why Is Your Battery Still Not Fully Charged When the Industrial Battery Charger Reaches Its Voltage Setpoint?

    Oct , 22 2026
    In industrial applications, a common assumption is that once the battery voltage reaches its setpoint, charging should be complete. However, for DC systems, auxiliary power supplies, substation battery banks and large industrial equipment, this judgment is incomplete. Reaching the target terminal voltage only indicates that charging has entered a new stage. It does not necessarily mean the battery...
    more

  • Why Does Your UPS Trigger an Overload Alarm Even When Its Capacity Is Sufficient?

    Why Does Your UPS Trigger an Overload Alarm Even When Its Capacity Is Sufficient?

    Oct , 22 2026
    In data centers, industrial automation systems, medical equipment and other critical applications, a UPS may trigger an overload alarm even when the displayed load is well below its rated capacity. Why does this happen when the load is only 60%? The problem is not necessarily that the UPS is undersized. Nonlinear loads, such as servers, variable-frequency drives and rectifier-based power supplies,...
    more

  • Industrial Battery Charger Sizing: How to Choose the Right Capacity

    Industrial Battery Charger Sizing: How to Choose the Right Capacity

    Oct , 29 2026
    Quick Answer Choosing an industrial battery charger with a higher current rating does not automatically make a DC power system more reliable. The right capacity depends on three factors: the continuous DC load, the charging current required to restore the battery after a discharge, and an appropriate design margin. A charger that is too small may operate near its rated capacity and leave insuffici...
    more

  • 48V Telecom Power System: Managing Backup Power and Critical Loads

    48V Telecom Power System: Managing Backup Power and Critical Loads

    Oct , 29 2026
    Quick Answer In a 48V telecom power system, a power outage does not always mean that all equipment will shut down at the same time. When utility power fails, the rectifiers stop supplying normal DC power, and the battery takes over. If the outage continues and the battery voltage drops, the Low Voltage Disconnect (LVD) function may disconnect selected loads to prevent excessive battery discharge. ...
    more

  • How Do Grid Power, Diesel Generators, and Batteries Work Together to Keep Remote Telecom Base Stations Powered?

    How Do Grid Power, Diesel Generators, and Batteries Work Together to Keep Remote Telecom Base Stations Powered?

    Nov , 06 2026
    Remote telecom base stations often face challenges when grid power is unstable or unavailable. To maintain a continuous power supply, these sites may rely on a combination of grid power, diesel generators, and battery backup. However, having multiple power sources does not automatically guarantee reliable operation. The real challenge is coordinating when each source takes over, how the rectifier ...
    more

  • Modular Charger Redundancy: Why a Failed Charger Module Should Never Be Ignored

    Modular Charger Redundancy: Why a Failed Charger Module Should Never Be Ignored

    Nov , 06 2026
    A reliable redundancy design does more than keep the DC Panel running. It turns unexpected failures into planned maintenance. A charger module fails, but the DC Panel continues operating normally. The DC bus voltage remains stable, connected loads receive power, and the monitoring system records only a module fault. Should maintenance wait until the entire DC Panel loses power? Not at all. In a re...
    more

  • Customized UPS and High-Voltage Lithium Battery Solutions for Critical Power Applications

    Customized UPS and High-Voltage Lithium Battery Solutions for Critical Power Applications

    Nov , 06 2026
    Reliable backup power is essential for facilities where even a brief power interruption can affect operational continuity, equipment safety, and service availability. From public utilities and wastewater treatment plants to modern data centers, UPS systems must deliver stable power while meeting specific requirements for backup duration, load capacity, installation space, and system integration. C...
    more
first page << 1 ... 17 18 19 last page

a total of19 pages

leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact