China Charging LiFePO4 batteries,Competitive Price Charging LiFePO4 batteries

What are the formulas to do the Power cable sizing calculation?

Nov , 03 2021

From our long experience of providing industrial battery charger solutions to our customers and partners, we have seen that there are some basic questions that are always asked. One of the basic questions we are always asked by our valuable customers is “what are the formulas needed to do the power cable sizing calculations?” Here we are sharing the basic formulas for your convenience. CHARGER SIZ...

more

Things You Must Know Before Buying A Residential Energy Storage Battery

Nov , 09 2021

With the requirement for energy growing by leaps and bounds in all aspects of life, it is wise to save energy for the future, instead of wasting away the excess. This is where a residential energy storage battery comes into the picture. When attached to the grid-based system, the battery stores sustainable energy and supplies it during the times when you cannot gain access to solar power or other ...

more

What are the recharge cycles phases of a Lead acid battery?

Nov , 27 2021

The fastest generally accepted way to charge a conventional (lead‐acid or NiCd) battery is with a constant voltage, a current limited battery charger that is capable of both “boost” and “float” output voltages. “Boost” charging applies a higher than normal voltage to the battery early in the charge cycle to charge the battery as quickly as possible. Later, once the battery is charged, charging vol...

more

What is the right duration of Phase 2 of a charging cycle?

Nov , 27 2021

The duration of Phase 1 is determined by the battery’s depth of discharge, the ratio of charger ampacity to battery capacity, and whether there are parasitic DC loads connected to the system. Although the duration of Phase 1 does vary, we are not concerned with this variation since, once the battery capacity, charger output, and DC loads are installed, we have no means to change the duration of Ph...

more

What is Dynamic Boost and how does it works?

Dec , 03 2021

As with the current‐controlled automatic boost system, Dynamic Boost includes no pre‐programmed boost timer. Unlike the current‐controlled automatic boost system, however, Dynamic Boost automatically adjusts boost duration to take into account differing parasitic DC loads and other variables discussed above. The principle behind Dynamic Boost is simple and straightforward. Refer back to Figure 1. ...

more

How a new intermittent charging algorithm addresses premature SLI battery failure?

Dec , 06 2021

A new charging algorithm addresses the problems of short genset battery life and sudden battery failure discussed above, while meeting the regulatory needs to deliver non-stop DC power to critical applications. The principle is simple and straightforward. Emulate the beneficial intermittent vehicle charging regime for which SLI batteries were originally designed, but continue charger operation to ...

more

What is the Life Expectancy of a Lithium Battery for a stationary application?

Dec , 10 2021

One of the key attractions for moving to lithium batteries is the battery life being multiples of what is possible with lead-acid batteries. Yet, with limited operating data in UPS applications available today, it’s natural for potential users to question how long lithium batteries will actually last. To address this question, it’s necessary to first understand how lithium battery packs degrade un...

more

Some frequently asked questions for Batteries-Part 1

Dec , 31 2021

From our long experience of providing battery solutions to our customers and partners, we have seen that there are some basic questions that are always asked. Here we are sharing some of the common questions and their answers regarding the batteries for your convenience. How long will it take before my battery is discharged? This depends on its capacity and the amount of power consumed by the conn...

more

What is Thermal runaway and what is its impact on cell chemistry?

Jan , 06 2022

One of the main causes of danger for lithium-ion cells is related to the phenomenon of thermal runaway. This is a healing reaction of the battery in use, caused by the nature of the materials used in the chemistry of the battery. Thermal runaway is mainly caused by the solicitation of batteries under specific conditions, such as overload under adverse climatic conditions. The result of a thermal r...

more

4 Ways Lithium Batteries Power Up Solar

Jan , 17 2022

Investing in solar is smart; pairing solar with a lithium battery storage unit is even smarter. While lithium batteries tend to be a higher initial investment than lead acid batteries, their superior performance and longevity makes them an ideal choice for off-grid and grid-tie applications. When selecting a battery to complement your solar system, understanding the advantages that lithium batteri...

more

What are the major factors needs to be considered in vehicle application Lithium battery?

Feb , 12 2022

Lithium batteries are lightweight and provide higher energy density than lead-acid or nickel–metal hydride (NiMH) batteries, creating a demand for them in electric vehicles (EV), energy storage, and consumer electronics. Compared to NiMH batteries, lithium batteries have a 50 percent greater capacity in watt-hours per kilogram (w-h/kg). The EV industry is demanding higher-efficiency batt...

more

Using carbon material in manufacturing process of VRLA battery

Mar , 02 2022

Several types of carbon find various uses in many types of electrochemical power sources. In this article, we focus on implementations of its elemental forms in presently used lead-acid batteries, as well as potential future improvements to their construction that carbon can bring. Unique properties of carbon and a variety of its allotropes allow it to find a use in different parts of lead-acid ba...

more

what are you looking for?

blog

blog