Blog
  • Why Does the Main Breaker Trip First? Understanding Selective Protection in DC Distribution Systems

    Why Does the Main Breaker Trip First? Understanding Selective Protection in DC Distribution Systems

    Oct , 09 2026
    Quick Answer When a branch short circuit causes the main breaker to trip first, the problem is not necessarily that the breaker is too small or too large. A more common cause is poor selectivity and coordination between upstream and downstream protection devices. A well-designed DC distribution system should isolate a fault as close to its location as possible. Ideally, a short circuit on one bran...
    more
  • Why Do Two 10 kVA UPS Systems Perform Differently Under the Same Load

    Why Do Two 10 kVA UPS Systems Perform Differently Under the Same Load

    Oct , 10 2026
    Quick Answer A UPS's rated capacity is only the starting point. Its actual load-handling capability depends on output power factor, peak current, overload curves, and load characteristics. Two 10 kVA UPS systems may perform very differently under the same load. One may operate reliably, while the other may trigger alarms, transfer to bypass, or experience degraded output waveforms—even when ...
    more
  • 48V Telecom Power System: How Long Can a Base Station Operate During a Power Outage?

    48V Telecom Power System: How Long Can a Base Station Operate During a Power Outage?

    Oct , 16 2026
    When the grid fails, a telecom base station must continue supplying power to keep network services available. But how long can it actually operate without utility power? The answer depends on several factors, including the site's power consumption, battery capacity, battery condition, and the configuration of the telecom power system. A reliable 48V telecom power system does more than provide back...
    more
  • Industrial UPS System: 4 Key Factors That Determine Power Supply Continuit

    Industrial UPS System: 4 Key Factors That Determine Power Supply Continuit

    Oct , 16 2026
    A UPS is more than a backup power source that keeps equipment running during a power outage. For servers, industrial control systems, communication equipment, and other critical loads, power continuity depends on how the entire system responds to changing operating conditions. From normal utility power to a sudden outage, and from inverter operation to bypass and battery operation, the real value ...
    more
first page << 1 ... 27 28 29 last page

a total of29 pages

leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact