China UPS solutions,Competitive Price UPS solutions

Frequently asked questions for industrial battery chargers: part-1

Nov , 04 2021

From our long experience of providing industrial battery charger solutions to our customers and partners, we have seen that there are some basic questions that are always asked. Here we are sharing some of the common questions and their answers regarding the rectifier chargers for your convenience. How are “equalize”, “boost” and “fast charge” charging different? Each of these terms describes the ...

more

How to implement battery monitoring in a deployable product?

Nov , 27 2021

Standalone ohmic battery monitoring systems designed for data center application are not suited for a genset environment. Although ohmic monitors work, they are expensive (estimated at $2,000 for a 24-volt system), time-consuming to install, and require trained personnel to interpret their data output. To achieve widespread adoption in the genset market any battery monitoring technology will need ...

more

What are the recharge cycles phases of a Lead acid battery?

Nov , 27 2021

The fastest generally accepted way to charge a conventional (lead‐acid or NiCd) battery is with a constant voltage, a current limited battery charger that is capable of both “boost” and “float” output voltages. “Boost” charging applies a higher than normal voltage to the battery early in the charge cycle to charge the battery as quickly as possible. Later, once the battery is charged, charging vol...

more

What is the Life Expectancy of a Lithium Battery for a stationary application?

Dec , 10 2021

One of the key attractions for moving to lithium batteries is the battery life being multiples of what is possible with lead-acid batteries. Yet, with limited operating data in UPS applications available today, it’s natural for potential users to question how long lithium batteries will actually last. To address this question, it’s necessary to first understand how lithium battery packs degrade un...

more

Some common question answers for Portable Energy storage solutions

Dec , 24 2021

As a leading energy storage solutions provider, we always get asked a varieties of questions by our valuable customers and partners, here in this article we have accumulated a few of them and tried to answer them accordingly. How long can I use my portable power storage to power my devices? First, you need to check out your device's operating power (measured by watts). If it is less than the outpu...

more

What is Thermal runaway and what is its impact on cell chemistry?

Jan , 06 2022

One of the main causes of danger for lithium-ion cells is related to the phenomenon of thermal runaway. This is a healing reaction of the battery in use, caused by the nature of the materials used in the chemistry of the battery. Thermal runaway is mainly caused by the solicitation of batteries under specific conditions, such as overload under adverse climatic conditions. The result of a thermal r...

more

Three Big Reasons You Should Pair a Home Battery with Solar

Jan , 10 2022

As residential solar installations increase across the country, homeowners are realizing that investing in solar alone won’t benefit them in the long run. The reason is because most solar energy is produced between 9 a.m. and 3 p.m. while (pre COVID-19) you’re probably at work or school. When you return home and start using your electronics and appliances, it’s likely that there isn't enough solar...

more

3 Reasons to Choose Energy Storage over a Generator during Fire & Hurricane Season: Reason-3

Jan , 10 2022

Past 2 years will stand out in the history books as years that forced us to radically rethink (and adjust) the status quo. As we go into summer, the stability of our utility grid will be put to the test when many of us are spending most of our time at home. Fire season will begin shortly in different places, with utilities sending out messages about public safety power shutoffs. On the...

more

The need for a UPS

Mar , 28 2022

There is a common misconception that the utility power we use, except for occasional power outages, is continuous and constant, but it is not. As a public power grid, the mains system is connected to thousands of various loads. Some of the larger inductive, capacitive, switching power supplies and other loads not only obtain power from the power grid, but also cause damage to the power grid itself...

more

Uninterruptible Power System-Use of Inverters & Chargers

May , 09 2022

If you already have a pretty good idea about the available methods for converting ac power to dc power, an inverter covers the other direction: changing dc into ac. Normally, when we speak of an inverter, we mean a device that generates line frequency power from a dc source, to power conventional ac-powered loads such as a personal computer, or industrial controls and instrumentation. A UPS integr...

more

UPS For Lift Application

May , 30 2022

Have you ever considered how you would evacuate people from a multistory building in case of power failure? Do you have responsibility for people coming and going from public buildings? If you do, you need to consider how you’re going to handle evacuation in the event of an extended power failure and are not equipped with a standby generator. It doesn’t need to be a dramatic situation just an exte...

more

High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-2)

Jun , 13 2022

Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...

more