China The use of carbon in batteries,Competitive Price The use of carbon in batteries

Why flooded SLI batteries in GENSET applications fail sooner and more suddenly than in vehicle applications?

Dec , 06 2021

Continuous float charging flooded SLI batteries accelerates the deterioration of polyethylene plate separators to a life shorter than that which battery designers intended. When subjected to continuous float charging, the dominant and earliest failure mode tends to be premature failure of the polyethylene separator. Separator failure typically results in short circuits that prevent the battery fro...

more

How a new intermittent charging algorithm addresses premature SLI battery failure?

Dec , 06 2021

A new charging algorithm addresses the problems of short genset battery life and sudden battery failure discussed above, while meeting the regulatory needs to deliver non-stop DC power to critical applications. The principle is simple and straightforward. Emulate the beneficial intermittent vehicle charging regime for which SLI batteries were originally designed, but continue charger operation to ...

more

Suitability of competing charging solutions in Genset applications

Dec , 10 2021

Instead of polyethylene, AGM type SLI batteries typically employ separators made of fiberglass. Because fiberglass does not oxidize like organic polyethylene, float charging at the battery manufacturer’s recommended float voltage is not inherently harmful to AGM type SLI batteries. Therefore, the intermittent charging method discussed is unlikely to increase the life of AGM type batteries. The dif...

more

Characteristics of Lead Acid and Nickel Cadmium Batteries for Generator starting application

Dec , 10 2021

The charger strips electrons from the cathode leaving it with a net positive charge and forces those electrons onto the anode giving it a negative charge. The energy pumped into the cell transforms the active chemicals back to their original state. The generator set industry primarily uses an automatic type battery charger for standby applications. The system designer selects the battery type on i...

more

What is the Life Expectancy of a Lithium Battery for a stationary application?

Dec , 10 2021

One of the key attractions for moving to lithium batteries is the battery life being multiples of what is possible with lead-acid batteries. Yet, with limited operating data in UPS applications available today, it’s natural for potential users to question how long lithium batteries will actually last. To address this question, it’s necessary to first understand how lithium battery packs degrade un...

more

Seven good reason for installing a Battery monitoring system

Dec , 17 2021

A battery management system allows users to monitor individual cells within a battery pack. As cells work together to release energy to the load, it is crucial to maintain stability throughout the whole pack. This is where a battery management system (BMS) comes into play. A BMS allows for constant monitoring, gathering, and communicating information to an external interface where users can observ...

more

Some frequently asked questions for Batteries-Part 1

Dec , 31 2021

From our long experience of providing battery solutions to our customers and partners, we have seen that there are some basic questions that are always asked. Here we are sharing some of the common questions and their answers regarding the batteries for your convenience. How long will it take before my battery is discharged? This depends on its capacity and the amount of power consumed by the conn...

more

What are the safety measures you need to maintain during a 12V VRLA battery installation?

Mar , 02 2022

Installation and servicing of the 12V VRLA battery should only be performed and supervised by personnel knowledgeable of lead acid batteries and required personal and equipment safety precautions. Keep unauthorized personnel away from the batteries and installation activity. Electrical Hazards Battery systems present a risk of electrical shock and high short circuit currents. The following precaut...

more

Using carbon material in manufacturing process of VRLA battery

Mar , 02 2022

Several types of carbon find various uses in many types of electrochemical power sources. In this article, we focus on implementations of its elemental forms in presently used lead-acid batteries, as well as potential future improvements to their construction that carbon can bring. Unique properties of carbon and a variety of its allotropes allow it to find a use in different parts of lead-acid ba...

more

Installing off-grid solar power on your RV

Mar , 02 2022

Off-grid solar installations in the middle of nowhere are often the first thing people think about when they think of going solar. While it’s definitely not for everyone, DIY off-grid solar can be a great solution for those living in a remote area without reliable and affordable access to the grid, want to live a self-reliant lifestyle without monthly utility bills, or have the ability to access p...

more

How to select batteries for your RV off grid system battery bank

Mar , 09 2022

Batteries are a crucial component of off-grid solar systems. After all, how are you going to store all the energy produced from your panels? There is a range of deep cycle battery options that are ideal for solar applications, such as sealed and flooded lead acid and lithium ion batteries. Flooded lead acid batteries are the cheapest battery option and are available in many big box stores. They al...

more

How to select solar panels for your RV off grid system

Mar , 09 2022

When it comes to actually collecting energy from the sun, that’s where solar panels come in. There are a few different solar panel options available to choose from. Mono-crystalline vs. Polycrystalline Panels Choosing between mono-crystalline and polycrystalline panels is one of the first steps to take when shopping for solar panels. Polycrystalline panels are light blue in color, and they are les...

more

what are you looking for?

blog

blog