on site fat

Uninterruptible Power Supply UPS System for Computers Protection

Apr , 26 2024

What is A UPS System? An Uninterruptible Power Supply (UPS) system is an electrical device that provides emergency power to a computer or other electronic equipment in the event of a power outage or electrical disturbance. It acts as a backup power source, allowing the connected devices to continue functioning for a certain period or providing sufficient time for a safe shutdown. How UPS System fo...

more

The difference between energy storage converter and grid-connected inverter

Apr , 26 2024

Energy Storage Converter Energy storage converters (PCS), also known as "bi-directional energy storage inverters", are the core components of the two-way flow of electricity between the energy storage system and the grid, and are used to control the charging and discharging processes of the battery, and to perform the conversion of AC and DC currents. In the absence of grid, it can directly supply...

more

Measures to suppress harmonics

May , 11 2024

The fundamental cause of harmonic generation is due to nonlinear loads. When the current flows through the load and does not have a linear relationship with the applied voltage, it forms a non sinusoidal current, resulting in harmonics. The suppression of harmonics in the power system is to reduce or eliminate the harmonic current injected into the system, in order to control the harmonic voltage ...

more

How Low Frequency UPS Safeguards Critical Information

May , 11 2024

What is a Low Frequency UPS? A Low Frequency Online UPS is a sophisticated power protection device that utilizes double conversion technology to provide continuous and clean power to connected equipment. Unlike traditional Offline UPS, where the load is directly powered by the mains until a power failure occurs, it continuously powers the load through an inverter, ensuring a seamless transition be...

more

Lead-acid battery failure model

May , 11 2024

The most common failure modes are: - Softening or shedding of the active material. During discharge the lead oxide (PbO2) of the positive plate is transformed into lead sulfate (PbSO4), and back to lead oxide during charging. Frequent cycling will reduce cohesion of the positive plate material due to the higher volume of lead sulfate compared to lead oxide. Corrosion...

more

Differences in communication serial ports

May , 16 2024

RS-232 and RS-485 are two common serial communication standards, with the following main differences between them: Different transmission methods: RS-232 adopts a single end transmission method, and its data signal is relative to the signal ground, usually used for point-to-point communication; RS-485 adopts differential transmission mode, allowing multiple transceivers to be connected on the bus,...

more

What is a nickel-cadmium battery

May , 31 2024

1. Working principle of nickel-cadmium battery Nickel-cadmium batteries are rechargeable batteries that convert chemical energy into electricity through REDOX reactions. It consists of a negative electrode (the negative material is Cd), a positive electrode (the positive material is NiOOH), and an electrolyte (the main component is KOH). 2. Features of nickel-cadmium batteries Long cycle life; Wid...

more

What are the benefits of online UPS and how to improve power quality

Jun , 06 2024

What are the benefits of online UPS power supply? The online UPS (uninterruptible power supply) system has multiple advantages, making it the preferred choice for applications that require reliable and stable power supply. Continuous power supply One of the main advantages of online UPS is its ability to provide continuous power supply to connected devices. Online UPS continuousl...

more

Differences in communication serial ports

Jun , 22 2024

RS-232 and RS-485 are two common serial communication standards, with the following main differences between them: Different transmission methods: RS-232 adopts a single end transmission method, and its data signal is relative to the signal ground, usually used for point-to-point communication; RS-485 adopts differential transmission mode, allowing multiple transceivers to be connected on the bus,...

more

The difference between the first, second, and third levels of distribution boxes

Jun , 22 2024

What do the primary, secondary, and tertiary boxes of a distribution box mean? This is a relative issue. Let's make a hypothesis: a newly built residential area introduces a 10kV incoming line and builds a distribution room. The outgoing line from the low-voltage end of the transformer is 0.4kV to the distribution cabinet (primary distribution cabinet), then the outgoing line is led to the distrib...

more

Maximum power point tracking algorithm for photovoltaic power generation

Jun , 22 2024

1. Introduction Photovoltaic power generation is a technology that uses solar energy to convert light energy into electricity. In the photovoltaic power generation system, in order to obtain the maximum power generation power, it is necessary to track the change of solar radiation intensity in real time, and adjust the working state of the photovoltaic module to keep near the maximum power point. ...

more

Influence of lithium analysis on battery capacity

Jun , 27 2024

I. Introduction The phenomenon of lithium evolution is an important problem affecting the capacity of lithium batteries. This article will discuss the impact of lithium analysis on battery capacity with you in detail, and analyze its causes and solutions. Second, the impact of lithium on battery capacity 1. Loss of active lithium ions Lithium evolution causes some of the lithium ions to form lithi...

more

what are you looking for?

blog

blog