Blog
  • DC-DC Converters-A suitable alternative to battery chargers

    DC-DC Converters-A suitable alternative to battery chargers

    May , 09 2022
    What if you had all the power you wanted or needed at 125 Vdc, but your site manager suddenly handed you a requirement for 24 Vdc to run some communication gear? You might tell him to buy a 24 V battery and a 24 V battery charger. But, these elements come with costs: initial, maintenance, and probable future battery replacement. There is another way: for approximately the same cost as the battery ...
    more
  • Battery charger options (part-3)

    Battery charger options (part-3)

    May , 16 2022
    In this series of articles we will discuss the options you can have in your battery charger. You can check out these options for choosing your desired battery charger solution. Charge Dividers Our charge divider option adds series diodes to the output of our charger to isolate multiple banks of batteries. The battery banks, in effect, do not see each other, allowing each bank to be charged complet...
    more
  • Battery charger options (part-4)

    Battery charger options (part-4)

    May , 23 2022
    In this series of articles we will discuss the options you can have in your battery charger. You can check out these options for choosing your desired battery charger solution. Reverse Polarity Protection and LED This circuit protects against someone accidently reversing the battery terminal connections on the charger (i.e. connecting the battery positive to the charger negative or vice versa). Th...
    more
  • High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-1)

    High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-1)

    Jun , 13 2022
    Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...
    more
  • High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-2)

    High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-2)

    Jun , 13 2022
    Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...
    more
  • High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-3)

    High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-3)

    Jun , 13 2022
    Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...
    more
  • Efficiency of DC power system

    Efficiency of DC power system

    Jun , 27 2022
    In this article we will explain the efficiency of DC systems and progress to AC systems on the next article. In very basic terms, efficiency is the measure of how much power is not being wasted by a system. More waste is less efficient. In electrical systems, we measure the power entering a system in watts; the unit of measure for work performed. Efficiency is the ratio of (Power-In) -vs. - (Power...
    more
  • Why use modular UPS and what are the advantages of modular UPS?

    Why use modular UPS and what are the advantages of modular UPS?

    Aug , 01 2022
    In recent years, with the rapid development of big data, cloud computing and other technologies, the traditional data center system is also changing rapidly. As a key component of the data center power supply and distribution system, the UPS industry is also changing. Modular UPS technology is becoming more and more mature, and more and more users have or are considering using modular UPS to build...
    more
  • Advantages of Modular UPS

    Advantages of Modular UPS

    Aug , 01 2022
    Generally speaking, the advertised modular UPS has the following advantages:       Easy to use, easy to install and expand       High availability and easy maintenance       Expansion on demand, saving initial investment       Module hibernation improves efficiency and saves operating costs       Intelligent network managem...
    more
  • Do Ferro resonant chargers still have a place in battery charging?

    Do Ferro resonant chargers still have a place in battery charging?

    Aug , 15 2022
    One of the larger battery/charger companies selling chargers in the USA have announced that they are no longer manufacturing Ferro resonant chargers and have set 7/31/15 as the last date to accept orders.Is there something wrong with Ferro resonant charging that should make all charger companies follow that lead? Let’s consider Ferro resonant technology. The purpose of a Ferro resonant transformer...
    more
  • Power Factor and Harmonic Analysis in Single phase AC to DC converter

    Power Factor and Harmonic Analysis in Single phase AC to DC converter

    Aug , 15 2022
    Most of the power conversion applications consist of an AC to DC conversion stage and this DC output is then used for further stages. An AC to DC converter is an integral part ofmost of the electronic equipment as most of these equipment are DC powered [1]. Generally to convert AC toDC a diode bridge rectifier is used. To reduce the ripple in the output voltage a suitable filter capacitor is used ...
    more
  • Power Factor and Harmonic Analysis in PWM converter

    Power Factor and Harmonic Analysis in PWM converter

    Aug , 15 2022
    Most of the power conversion applications consist of an AC to DC conversion stage and this DC output is then used for further stages. An AC to DC converter is an integral part of most of the electronic equipment as most of these equipment are DC powered [1]. Generally to convert AC to DC a diode bridge rectifier is used. To reduce the ripple in the output voltage a suitable filter capacitor is use...
    more
first page << 1 2 3 4 5 6 7 8 >> last page

a total of8 pages

leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact