lithium ion energy storage system

Causes, effects and measures of common problems of photovoltaic modules

Apr , 26 2024

First. Excessively high/low temperature Excessively high or low PV module temperatures can negatively affect the performance of the PV power system. The following are the causes and effects as well as the corresponding measures: 1. Causes of excessive temperature: solar radiation, heat conduction, shadow coverage, etc. Impact: Reduces the conversion efficiency of the module. Excessive temperature ...

more

Measures to suppress harmonics

May , 11 2024

The fundamental cause of harmonic generation is due to nonlinear loads. When the current flows through the load and does not have a linear relationship with the applied voltage, it forms a non sinusoidal current, resulting in harmonics. The suppression of harmonics in the power system is to reduce or eliminate the harmonic current injected into the system, in order to control the harmonic voltage ...

more

How Low Frequency UPS Safeguards Critical Information

May , 11 2024

What is a Low Frequency UPS? A Low Frequency Online UPS is a sophisticated power protection device that utilizes double conversion technology to provide continuous and clean power to connected equipment. Unlike traditional Offline UPS, where the load is directly powered by the mains until a power failure occurs, it continuously powers the load through an inverter, ensuring a seamless transition be...

more

Differences in communication serial ports

May , 16 2024

RS-232 and RS-485 are two common serial communication standards, with the following main differences between them: Different transmission methods: RS-232 adopts a single end transmission method, and its data signal is relative to the signal ground, usually used for point-to-point communication; RS-485 adopts differential transmission mode, allowing multiple transceivers to be connected on the bus,...

more

Air cooling and heat dissipation design of industrial and commercial energy storage system

Jun , 14 2024

1 Air cooling and heat dissipation design of industrial and commercial energy storage system Air cooling is the use of air as a heat exchange medium, the use of air to circulate in the battery pack, the use of the temperature difference between the battery module and the air for heat transfer, generally divided into passive air cooling and active air cooling. The main factors affecting its cooling...

more

Industrial and commercial energy storage system liquid cooling design

Jun , 14 2024

1. Industrial and commercial energy storage system liquid cooling design For the high-rate charging and discharging process of large-scale battery packs, the cooling capacity of air cooling system can not meet the heat dissipation demand of battery packs. Liquid has a higher specific heat capacity and higher thermal conductivity than air, and the liquid cooling cooling speed is faster, which has a...

more

Differences in communication serial ports

Jun , 22 2024

RS-232 and RS-485 are two common serial communication standards, with the following main differences between them: Different transmission methods: RS-232 adopts a single end transmission method, and its data signal is relative to the signal ground, usually used for point-to-point communication; RS-485 adopts differential transmission mode, allowing multiple transceivers to be connected on the bus,...

more

The difference between the first, second, and third levels of distribution boxes

Jun , 22 2024

What do the primary, secondary, and tertiary boxes of a distribution box mean? This is a relative issue. Let's make a hypothesis: a newly built residential area introduces a 10kV incoming line and builds a distribution room. The outgoing line from the low-voltage end of the transformer is 0.4kV to the distribution cabinet (primary distribution cabinet), then the outgoing line is led to the distrib...

more

Maximum power point tracking algorithm for photovoltaic power generation

Jun , 22 2024

1. Introduction Photovoltaic power generation is a technology that uses solar energy to convert light energy into electricity. In the photovoltaic power generation system, in order to obtain the maximum power generation power, it is necessary to track the change of solar radiation intensity in real time, and adjust the working state of the photovoltaic module to keep near the maximum power point. ...

more

Influence of lithium analysis on battery capacity

Jun , 27 2024

I. Introduction The phenomenon of lithium evolution is an important problem affecting the capacity of lithium batteries. This article will discuss the impact of lithium analysis on battery capacity with you in detail, and analyze its causes and solutions. Second, the impact of lithium on battery capacity 1. Loss of active lithium ions Lithium evolution causes some of the lithium ions to form lithi...

more

Analysis and application of charge and discharge curve of lithium battery

Jun , 27 2024

Abstract: In this paper, the analysis method of charge and discharge curve of lithium battery is introduced in detail, including charge efficiency, discharge characteristics, capacity evaluation, internal resistance evaluation and cycle life evaluation. Through the interpretation of the charge and discharge curve, the performance and characteristics of lithium batteries can be deeply understood, w...

more

The characteristics and principle analysis of internal resistance of lithium battery

Jul , 12 2024

The internal resistance of the battery is one of the most important characteristic parameters of the battery, which is an important parameter to characterize the battery life and the operating state of the battery, and an important symbol to measure the difficulty of the transmission of electrons and ions in the electrode. The internal resistance also reflects the health of the battery. The intern...

more

what are you looking for?

blog

blog