China How to Choose an Industrial UPS,Competitive Price How to Choose an Industrial UPS

Differences in communication serial ports

May , 16 2024

RS-232 and RS-485 are two common serial communication standards, with the following main differences between them: Different transmission methods: RS-232 adopts a single end transmission method, and its data signal is relative to the signal ground, usually used for point-to-point communication; RS-485 adopts differential transmission mode, allowing multiple transceivers to be connected on the bus,...

more

A Brief Introduction To Filter Circuits

May , 25 2024

In the rectifier filter circuit, there are two parts of the circuit altogether, respectively the rectifier circuit and the filter circuit, the functions of the two are different, the function of the rectifier circuit is to convert the sine wave AC voltage, and the function of the filter circuit is to convert the unidirectional ripple voltage, and the functions of the two parts of the circuit work ...

more

Indispensable components of using UPS uninterruptible power supply

May , 25 2024

A UPS uninterruptible power supply is a system device that connects a battery to a mainframe and converts DC power to city power through the modular circuitry of the mainframe inverter. High-efficiency double-conversion UPS with multiple modes of operation purifies power over the rated voltage and frequency range of IT equipment and industrial equipment. In choosing a modular system design, the UP...

more

Characteristics of UPS power supply used in server rooms

May , 31 2024

1. At the beginning of the bullying load is small, and expansion may occur at a later stage. There must be a redundant design that does not allow the load to be turned off during expansion. 2、It can be used in conjunction with the original generator as a power source or distribution for faulty configurations to ensure the smooth operation of power supply. 3, When a UPS failure, the faulty UPS batt...

more

Commonly used industrial communication protocols

May , 31 2024

1、Modbus protocol (1) Modbus packet type Modbus protocol is an application-layer message transmission protocol that can be transmitted on various media, and the transmission mode is divided into three types: ASCII, RTU (Remote Terminal Control System), and TCP. There are multiple versions of the Modbus protocol for serial ports, but the following three are the most common: Modbus-RTU: In thi...

more

Advantages of Nickel-Cadmium Batteries

May , 31 2024

Ni-Cd batteries have been around nearly as long as lead-acid. Commercial products have been available since around 19007. Pocket plate designs are typically used for long to high current types, while fiber plates are used for extremely high current short demand applications like engine starting. While Ni-Cd batteries typically cost many times what a comparable lead-acid does, their characte...

more

What are the benefits of online UPS and how to improve power quality

Jun , 06 2024

What are the benefits of online UPS power supply? The online UPS (uninterruptible power supply) system has multiple advantages, making it the preferred choice for applications that require reliable and stable power supply. Continuous power supply One of the main advantages of online UPS is its ability to provide continuous power supply to connected devices. Online UPS continuousl...

more

What are the characteristics of industrial UPS power supplies

Jun , 14 2024

Industrial UPS power supply needs to focus on the design of the ability to operate in high-temperature environments. Component design must be adapted to the operating requirements of industrial environments, high temperature and high humidity, but also to cope with corrosive gases on the corrosion of the system. Operating continuously at full load under a variety of operating conditions, industria...

more

Air cooling and heat dissipation design of industrial and commercial energy storage system

Jun , 14 2024

1 Air cooling and heat dissipation design of industrial and commercial energy storage system Air cooling is the use of air as a heat exchange medium, the use of air to circulate in the battery pack, the use of the temperature difference between the battery module and the air for heat transfer, generally divided into passive air cooling and active air cooling. The main factors affecting its cooling...

more

Industrial and commercial energy storage system liquid cooling design

Jun , 14 2024

1. Industrial and commercial energy storage system liquid cooling design For the high-rate charging and discharging process of large-scale battery packs, the cooling capacity of air cooling system can not meet the heat dissipation demand of battery packs. Liquid has a higher specific heat capacity and higher thermal conductivity than air, and the liquid cooling cooling speed is faster, which has a...

more

Maximum power point tracking algorithm for photovoltaic power generation

Jun , 22 2024

1. Introduction Photovoltaic power generation is a technology that uses solar energy to convert light energy into electricity. In the photovoltaic power generation system, in order to obtain the maximum power generation power, it is necessary to track the change of solar radiation intensity in real time, and adjust the working state of the photovoltaic module to keep near the maximum power point. ...

more

Factors affecting photovoltaic inverters

Jun , 22 2024

1. The impact of altitude on photovoltaic inverters Altitude has a certain impact on the performance and reliability of photovoltaic inverters. As the altitude increases, the air pressure decreases and the air density decreases, which will lead to a decrease in the heat dissipation capacity of the photovoltaic inverter. In addition, the climatic conditions at high altitudes, such as temperature ch...

more

what are you looking for?

blog

blog