everexceed ni cd batteries

Why battery calibration?

Apr , 03 2025

Definition of Battery Calibration Battery calibration refers to the process of resetting and synchronizing the battery's power management system with the device's software to accurately gauge the battery's charge level and capacity. This procedure involves fully charging the battery, allowing it to drain completely, and then recharging it to recalibrate the device's battery indicator to provide ac...

more

Calculation of the heat generation of lithium batteries

May , 24 2025

The calculation of heat generation of lithium batteries is an important part of battery thermal management, involving multiple heat sources. The following are the detailed calculation methods and steps: 1. Main source of heat The heat generation of lithium batteries mainly comes from the following parts: Joule heat (Qj) : The heat generated when current passes through the internal resistance of a ...

more

The reason why LiFePO4 batteries cannot be charged but can be discharged below 0℃

Jun , 07 2025

Why LiFePO4 Batteries Cannot Be Charged Below 0°C but Can Still Discharge The reason why LiFePO4 (Lithium Iron Phosphate) batteries, such as the EverExceed battery range, cannot be charged below 0°C yet can still discharge lies mainly in their electrochemical characteristics and safety considerations. 1. Why Charging Is Restricted at Low Temperatures Lithium Plating Risk: At sub-zero temperatures,...

more

What are the differences between energy storage battery management systems and power battery management systems?

Jun , 13 2025

The energy storage battery management system (BMS) and the power battery BMS are very similar in overall structure and core functions, but due to different application scenarios, there are obvious differences between the two in design logic, communication protocol, hardware structure, etc. Especially in high-security and high-scalability energy storage systems represented by EverExceed, BMS not on...

more

How Low-Voltage Active Power Filters Compensate for Harmonics in the Power Grid

Jun , 16 2025

With the increasing use of nonlinear loads such as variable frequency drives, rectifiers, and other power electronic devices, power grid harmonics have become a common problem in low-voltage electrical systems. Low-voltage active power filters (APFs) play a key role in detecting and mitigating harmonic distortion to improve power quality. Here’s how APFs work to actively compensate for harmonics i...

more

What are the benefits of high-rate discharge UPS lithium batteries?

Jun , 21 2025

High-Rate Discharge Lithium Battery for UPS: Rapid Backup Power for Critical Applications The primary role of a high-rate discharge lithium battery in an uninterruptible power supply (UPS) system is to deliver a large current output within a short period, ensuring stable operation during sudden power outages or voltage fluctuations. The EverExceed high-voltage UPS lithium battery series is designe...

more

The Impact of High Temperatures on Lead-Acid Batteries and Recommended Solutions

Jul , 19 2025

Lead-acid batteries are widely used in energy storage, telecom base stations, and UPS systems. However, their performance is significantly affected by ambient temperature—especially under high-temperature conditions, which can lead to rapid degradation and potential safety risks. Below are six key impacts of high temperature on lead-acid batteries and how to address them: 1. Short-Term Capacity Ga...

more

Understanding THDI: Total Harmonic Distortion in Current

Aug , 08 2025

As modern power systems rely more on nonlinear loads, Total Harmonic Distortion in Current (THDi) has become a critical factor in ensuring power quality and equipment longevity. In this article, we explore what THDi is, its causes, its impacts on equipment, and how to mitigate it using advanced harmonic filtering techniques. 1. What is THDi? THDi stands for Total Harmonic Current Distortion. It is...

more

The Hazards of Overcharging Lead-Acid Batteries

Aug , 08 2025

1. Significant Capacity Decline ① During overcharging, excessive chemical reactions occur inside the battery. The active material, lead dioxide, on the positive plate gradually becomes loose and loses its original structural stability, reducing its ability to participate in electrochemical reactions. ② The active material, spongy lead, on the negative plate also experiences a coarsening of particl...

more

Why EverExceed Ni-Cd Batteries Use Potassium Hydroxide (KOH) as Electrolyte

Aug , 22 2025

When it comes to industrial-grade energy storage, nickel-cadmium (Ni-Cd) batteries remain a trusted choice thanks to their reliability, long service life, and excellent temperature tolerance. A critical factor behind this proven performance is the use of potassium hydroxide (KOH) as the electrolyte. At EverExceed, our advanced Ni-Cd batteries are engineered with optimized KOH formulations to maxim...

more

Safe Storage of Lithium-Ion Batteries | EverExceed

Aug , 29 2025

Lithium-ion batteries are widely used in energy storage, UPS systems, and various industrial applications. To ensure long-term safety and performance, proper storage is essential. EverExceed provides professional guidance on the safe storage of lithium-ion batteries to help customers minimize risks and maintain reliability. Storage Requirements and Recommendations Ambient Temperature dian Optimal:...

more

EverExceed Lithium Battery PACK Process: Safety · Consistency · Efficiency

Aug , 30 2025

In today’s fast-growing new energy industry, the PACK process has become the key to evaluating the safety and reliability of battery systems. EverExceed, committed to delivering safe and reliable energy storage solutions, continuously optimizes PACK design and processes with years of expertise to ensure outstanding performance in global markets. Core Objectives of the PACK Process Safety: EverExce...

more

what are you looking for?

blog

blog