China Data and IT applications,Competitive Price Data and IT applications

7 Factors to Examine While Choosing a Lithium-Ion Battery Charger

Jul , 20 2023

From confirming an acceptable input voltage to features like protection design and safe charging mode, these factors can help you select the right lithium-ion battery charger 1. Acceptable Input Voltage An input higher than the voltage sustenance capacity of the charger may cause damage to its internal components. Most countries use a battery charger design of the universal global voltage 110-230V...

more

Exploring the importance of UPS power supply in the composition of computer rooms

Jul , 20 2023

For data centers, faults are inevitable during the operation of the power system. Although the probability of a malfunction occurring is small and the duration is not long, the consequences are often very serious. When a power system malfunctions, the operating state will undergo a sharp change. So the application of a UPS power supply is particularly important for the uninterrupted operation of t...

more

Selection of the Function of Power Filter Capacitors

Aug , 10 2023

1 、The Role of Power Filter Capacitors The power filter capacitor is a type of capacitor connected in series between the power output and the load, mainly used to filter high-frequency noise in the power supply and ensure the stability and reliability of the power output. At the output end of the power supply, due to the conversion of AC power to DC power, there will be a certain AC component in t...

more

The working principle of anti reverse diode

Aug , 10 2023

Anti reverse diode, also known as reverse protection diode, is a component used in a circuit to prevent reverse current from flowing in. This type of diode is usually composed of a PN junction diode. Under normal operating conditions, the pressure difference between its P and N poles will cause the diode to conduct, while under reverse conditions, this pressure difference disappears and the diode ...

more

The Role of AC Capacitors in High Speed Circuits

Aug , 18 2023

1、Introduction For low-frequency circuits, resistors and capacitors can be analyzed as ideal devices. However, in high-frequency circuits, these two devices will not be "ideal". Today, our main discussion is about the issue of AC capacitors, which are commonly known as AC coupling capacitors. Their main function is to filter out the DC component of the signal, which is symmetrical about the X-axis...

more

Lithium-ion battery terms explained

Aug , 18 2023

I. Battery voltage (V) 1. Open circuit voltage (OCV) The voltage of the lithium battery when it is not connected to an external circuit or load can generally be tested with a multimeter. 2. Operating voltage (WV) The potential difference between the positive and negative terminals of the battery under applied load, that is, when there is current flowing through the battery in the circuit. When the...

more

Important performance of the battery

Sep , 04 2023

1, electrical performance: (1) Rated capacity: 0.5C discharge, single battery discharge time is not less than 2h, battery pack discharge time is not less than 108min (95%); (2) 1C discharge capacity: 1C discharge, single battery discharge time is not less than 57min (95%), battery pack discharge time is not less than 54min (90%); (3) Low temperature discharge capacity: 0.5C discharge at -20℃, the ...

more

Interface level standards between digital systems

Sep , 09 2023

Preface When we constrain the FPGA project, we often see such level standards, such as LVCOM18, LVCOS25, LVDS, LVDS25, etc. In fact, these are a series of level standards, in order to have a deeper understanding of the level standards, the following excerpts from the book "The FPGA Way" for the explanation of the level standards to understand. Dual Threshold Standard The so-called dual-threshold s...

more

How do lithium batteries screen distribution groups?

Sep , 19 2023

The inconsistency between single batteries often causes problems such as too fast capacity decay and short life during the cycle of battery packs. Improving the consistency of batteries is of great significance to the popularization and application of lithium-ion batteries. 1 Inconsistency analysis Definition of inconsistency The inconsistency of the lithium-ion battery pack means that after the s...

more

The function and operation method of UPS power supply are not affected by voltage interference

Oct , 08 2023

UPS power supply is a type of power protection device mainly used to protect electronic devices (such as computers, servers, etc.) from damage during power outages or voltage instability. The function of UPS power supply: 1.Protect electronic devices from power outages and voltage fluctuations. 2.In the event of a power outage, the UPS power supply can continue to supply power,ensuring the normal ...

more

How to classify UPS power supplies based on their principles and strong software functions

Oct , 08 2023

There are various types of UPS power supplies available in the market today, with output power ranging from 500VA to 4800KVA (multiple units in parallel). UPS power supply can be divided into three categories according to its working principle: backup UPS, online interactive UPS, and online UPS; According to the output waveform, it can be divided into two types: square wave output UPS and sine wav...

more

What is the difference between the 8/20us waveform and the 10/350us waveform in surge protective devices (SPD)

Oct , 08 2023

The surge protector has an important parameter, 8/20us or 10/350us, which many people are unaware of. The main function of the surge protector is to respond to lightning strikes, including direct and induced lightning. The forms of direct lightning and inductive lightning have different energies, and their current waveforms are similar to 10/350us (direct lightning) and 8/20us (inductive lightning...

more

what are you looking for?

blog

blog