China AC Solution,Competitive Price AC Solution

How to charge Lead Acid Battery properly?

Aug , 31 2021

A battery is an electrochemical device. During the battery discharge process, the stored chemical energy is converted to electrical energy that is used to power an electrical load. The charging process is the opposite reaction, where the electrical energy from the charging source is being stored into the chemical energy of the battery. In this article, we will know about the procedures of charging...

more

How to calculate Solar Payback?

Aug , 31 2021

Solar energy is a rapidly growing industry, thanks to the dramatic drop in prices for solar energy systems in the past decade. In most cases it is more cost effective to implement a solar energy system than to buy electricity from the local utility company. Solar provides predictably priced electricity for 20-30 years, making it easy for businesses to forecast operational expenses. In top of that,...

more

How to ensure uninterrupted power supply to telecom BTS with less OPEX

Aug , 31 2021

The telecommunications market has become a major consumer of power. With so much growth, service continuity continues to be a must. As technology gives rise to more and more telecom devices in the market, people and products are able to connect globally. Look around you and see how many people are tapping away on their smart phones or other devices. We, as a society, have become incredibly depende...

more

What are the formulas to do the battery charger sizing calculation?

Nov , 03 2021

From our long experience of providing industrial battery charger solutions to our customers and partners, we have seen that there are some basic questions that are always asked. One of the basic questions we are always asked by our valuable customers is “what are the formulas needed to do the battery charger sizing calculations?” Here we are sharing the basic formulas for your convenience. . CHARG...

more

Why small, low-cost batteries are generally a poor match for highly capable ohmic battery monitoring products?

Nov , 18 2021

The answer isn’t just cost. There are some contrasts between the differing performance expectations and resource environments of two categories of stationary battery system users. It proposes some simple requirements for battery monitoring at cost-constrained sites with modest-sized stationary battery systems and proposes a solution to providing battery health assessment at such sites. Operators o...

more

Why high performance battery monitoring solutions suit sophisticated users?

Nov , 18 2021

The battery monitoring industry has made a strong case that today’s ohmic battery monitoring systems are effective at discovering battery weakness well in advance of complete failure. Such systems are employed to increase a user’s certainty that stationary batteries will deliver their rated output when needed, thus preventing application downtime. The need for uptime at a credit card processing si...

more

Implementing a useful battery assessment system at low cost

Nov , 22 2021

In the battery system industry, some companies provide charger and battery systems to smaller, mission-critical applications; for some years, it has been clear that reducing the impact of battery failure is the best way to increase the user’s overall system reliability. In contrast to power electronics that can achieve MTBF in the range of 1 million hours, all VRLA batteries will fail between “now...

more

How to implement battery monitoring in a deployable product?

Nov , 27 2021

Standalone ohmic battery monitoring systems designed for data center application are not suited for a genset environment. Although ohmic monitors work, they are expensive (estimated at $2,000 for a 24-volt system), time-consuming to install, and require trained personnel to interpret their data output. To achieve widespread adoption in the genset market any battery monitoring technology will need ...

more

What are the recharge cycles phases of a Lead acid battery?

Nov , 27 2021

The fastest generally accepted way to charge a conventional (lead‐acid or NiCd) battery is with a constant voltage, a current limited battery charger that is capable of both “boost” and “float” output voltages. “Boost” charging applies a higher than normal voltage to the battery early in the charge cycle to charge the battery as quickly as possible. Later, once the battery is charged, charging vol...

more

What is the right duration of Phase 2 of a charging cycle?

Nov , 27 2021

The duration of Phase 1 is determined by the battery’s depth of discharge, the ratio of charger ampacity to battery capacity, and whether there are parasitic DC loads connected to the system. Although the duration of Phase 1 does vary, we are not concerned with this variation since, once the battery capacity, charger output, and DC loads are installed, we have no means to change the duration of Ph...

more

What is Dynamic Boost and how does it works?

Dec , 03 2021

As with the current‐controlled automatic boost system, Dynamic Boost includes no pre‐programmed boost timer. Unlike the current‐controlled automatic boost system, however, Dynamic Boost automatically adjusts boost duration to take into account differing parasitic DC loads and other variables discussed above. The principle behind Dynamic Boost is simple and straightforward. Refer back to Figure 1. ...

more

Why Boost Charging is Necessary?

Dec , 06 2021

Boost charging is a very necessary activity during the operation of a VRLA battery in their life time. In this article we are going to discuss about the necessity of Boost charging in details. The following example helps illustrate two facts about reducing battery recharge time: Cutting recharge time in half is more complex than using a charger that delivers twice as many amperes. Multi‐rate charg...

more

what are you looking for?

blog

blog