China AC power system,Competitive Price AC power system

What are the reasons for the sulfation of lead-acid battery plates?

Apr , 15 2023

The reasons for plate sulfation are as follows: 1) The initial charging of the battery is insufficient or the initial charging interruption time is long; 2) The battery is insufficiently charged for a long time; 3) Failure to charge in time after discharge; 4) Frequent overcharging or low current deep discharge; 5) If the density of the electrolyte is too high or the temperature is too high, lead ...

more

How UPS and generator can become the complete critical power solutions

Apr , 19 2023

How UPS and generator can become the complete critical power solutions with uninterruptible power and backup power supplies？ A UPS can support its critical load during utility power anomalies and blackouts – but only until its battery autonomy expires. Conversely, an adequately-fuelled generator can support the load indefinitely, but needs time to start up and stabilise. Operators of any data cent...

more

Summary of the Design of Power Battery Management system

Apr , 24 2023

With the increasing number of electric vehicles, battery energy management system is becoming more and more important in addition to looking for batteries with high energy density and high safety. Different power batteries have different properties, and even if the same type of battery properties are inconsistent, in the process of use, there will be the possibility of accidents caused by expansio...

more

Analysis of BMS (Battery Management System) Protection Mechanism and Working Principle

May , 06 2023

I. BMS function First, we'll detail its four main functions. (1) Perception and measurement Measurement is the perception of the state of the battery This is the basic function of BMS, including the measurement and calculation of some index parameters, including voltage, current, temperature, power, SOC (state of charge), SOH (state of health), SOP (state of power), SOE (state of 能源). SOC can be c...

more

Introduction of industrial and commercial energy storage and analysis of income mode

May , 15 2023

Industrial and commercial energy storage system composition Industrial and commercial energy storage systems and energy storage power station systems include battery systems +BMS, PCS, EMS, transformers, racks, connecting cables, busbar cabinets, lightning protection, and grounding systems, monitoring and alarm systems, etc. Industrial and commercial energy storage systems are different from large...

more

How to use UPS power supply to maximize its service life?

May , 16 2023

The UPS power supply room should be a room with an empty and anti-static floor. The lightning protection effect should be good. It should be dustproof, moisture-proof and sunscreen. The input voltage should be within the planning. The most reasonable load planning is 30% - 60%. Full load and overload operation will affect the life of UPS. Maintain at least once a year. However, in practice, it is ...

more

What is an Offline UPS?

May , 16 2023

Standby or Offline UPS is one of the three main types of the static UPS.It is the simplest and least expensive uninterruptible power supply system. Actually, some don’t even consider it as a UPS, because of the presence of a momentary break during transfer or switching. Due to that, an offline UPS is sometimes described as a standby power supply (SPS). Nonetheless, the design employed by the stand...

more

What does a complete data center look like?

May , 22 2023

Ⅰ.What is data center? Data center usually refers to the centralized processing, storage, transmission, exchange, and management of data and information in a physical space. It generally contains key equipment such as computer equipment, server equipment, network equipment, communication equipment, and storage equipment. The infrastructure of the data center refers to the basic project designed an...

more

The UPS technical glossary

May , 23 2023

This ups technical glossary is designed to help you to understand the technical terms used within the uninterruptible power supply (UPS) industry. A AC ripple Is the residual periodic variation of the DC voltage withina UPS which has been derived from an unwelcome alternating (AC) source. An AC ripple causes internal heating and deterioration of the UPS battery poles and so should be prevented fom...

more

How to Select a UPS for Power Backup？

May , 29 2023

If you’ve spent any time looking for a backup power UPS, then you already know that when it comes to an uninterruptible power supply, you have an unlimited number of options. Narrowing them down and choosing the right UPS power supply for your application depends on a number of different factors including UPS system typology, UPS load capacity, and UPS runtime, to name just a few. Simplify your UP...

more

UPS battery maintenance is importance for power backup

May , 29 2023

Who would not appreciate a backup power supply? So, your uninterruptible power supply at the heart of it. Do you know that the many batteries that make up your UPS Battery are each crucial to its functioning? One badly working battery can ruin your entire system. Especially in the places like data centre operations, this risk is highly unaffordable. Most of the time when you hear the UPS failed is...

more

Self-discharge measurement of lithium batteries: resting and dynamic measurement methods

Jun , 14 2023

The measurement methods of self-discharge of lithium-ion batteries are mainly divided into two categories: 1) static measurement method, which obtains the self-discharge rate by standing the battery for a long time; 2) Dynamic measurement method to realize the parameter identification of the battery in the dynamic process. Static measurement method At present, the mainstream self-discharge measure...

more

what are you looking for?

blog

blog