ac coupling capacitors

Explore and analyze the thermal power of Li- ion cells and battery packs (part-1)

Jul , 04 2022

Temperature is very important for lithium- ion batteries. Low temperature will reduce the electrical performance of lithium- ion batteries (capacity, rate performance), but it can improve the storage life of lithium- ion batteries. High temperature can improve electrical performance (capacity, rate performance), but It will reduce the stability of the electrode/electrolyte interface and cause a ra...

more

Explore and analyze the thermal power of Li- ion cells and battery packs (part-4)

Jul , 11 2022

Continuing from last week’s article, this week we are going to discuss other parameters. 3. Influence of charge and discharge rate The charge and discharge rate characterizes the charge and discharge current of the lithium- ion battery. Therefore, the charge and discharge rate must have a very significant impact on the heat generation power of the lithium-ion battery. , the final temperature and t...

more

Explore and analyze the thermal power of Li- ion cells and battery packs (part-5)

Jul , 11 2022

Continuing from last week’s article, this week we are going to discuss other parameters. 4. The temperature rise and temperature difference of the battery pack under different working conditions On the basis of the above-mentioned single cell heat generation model, the battery pack model was established by using SOLIDWORKS software to simulate the heat production and the battery pack under differe...

more

Theoretical introduction to an AC power system

Jul , 22 2022

AC Power Systems have plenty more units, terms, measurements, interesting waveforms and math to describe their behavior. Any formulas presented here are for reference and validation only. The intension of this paperis convey the concept without having to seriously crunch numbers. All the terms and formulas interweave so itis difficult to create a flow of one topic to another without skipping aroun...

more

The Importance of Data Centers

Jul , 22 2022

What Is A Data Center? In simplistic terms, a data center is fundamentally a huge computer that stores and processes information. They represent a physical facility that companies use to house their critical applications and data. Their design is based on a network of computing and storage resources that enable the delivery of shared applications and data. Any company or organization that handles ...

more

Power Factor and Harmonic Analysis in Single phase AC to DC converter

Aug , 15 2022

Most of the power conversion applications consist of an AC to DC conversion stage and this DC output is then used for further stages. An AC to DC converter is an integral part ofmost of the electronic equipment as most of these equipment are DC powered [1]. Generally to convert AC toDC a diode bridge rectifier is used. To reduce the ripple in the output voltage a suitable filter capacitor is used ...

more

Effect of formation current density on battery performance

Sep , 13 2022

When graphite is used as the negative electrode active material, there are two types of reactions for the formation of SEI films: two-electron reactions, that is, two electrons participate in the reaction at the same time, and it is easier to generate inorganic lithium salt components; single-electron reactions, that is, only need A reaction that can take place when one electron participates, it i...

more

Key Factors in Choosing the Right UPS

Sep , 26 2022

You rely on your UPS system for backup if your power goes out, right? But does your UPS have your back? That is, will it provide a bridge of power long enough for what you need? At the very least you will want to save your data and perform a safe shutdown. Your UPS backup battery will only provide power for a set amount of time, known as runtime. In this article, we will provide a step-by-step app...

more

How to do the battery identification of lithium technology?

Oct , 17 2022

How to do the battery identification of lithium technology? According to the IEC61960 standard, the identification of secondary lithium batteries is as follows: 01) The battery identification consists of 3 letters followed by 5 numbers (cylindrical) or 6 (square) numbers. 02) The first letter: Indicates the negative electrode material of the battery. I—represents lithium ions with built-in batteri...

more

What are the possible reasons for the zero voltage or low voltage of the single cell and battery pack?

Oct , 24 2022

What are the possible reasons for the zero voltage or low voltage of the single cell? 01) External short circuit or overcharge or reverse charge of the battery (forced overdischarge); 02) The battery is continuously overcharged by high rate and high current, resulting in the expansion of the battery pole core, the direct contact of the positive and negative poles, and the short circuit; 03) Intern...

more

Using uninterruptible power supply systems to avoid power disruptions

Feb , 15 2023

Any outage scenario causes worry and wonder among employees, as well as stress and strain for the team in charge. Instead of working efficiently, everyone gathers around a window to see or discuss the cause, which can be one of many things. Power loss without uninterruptible power supply systems Utility companies routinely summarize the reasons for any power outages in the regular reports. The cau...

more

Answers to the characteristics of lead-acid batteries

Feb , 16 2023

1. How AGM vs Lead Acid Batteries Work The AGM battery and the standard lead acid battery are technically the same when it comes to their base chemistry. They both use lead plates and an electrolyte mix of sulfuric acid and water and have a chemical reaction that produces hydrogen and oxygen as a byproduct. However, this is when they start to diverge. Here’s how: A. Flooded Lead Acid Battery The f...

more

what are you looking for?

blog

blog