ups non linear load

Explanation of terms related to UPS power supply

Jul , 06 2024

Transient Recovery Time: The time it takes for the output voltage to return to the specified range when there is a sudden change in load (0‐100%, 100%‐0), usually on the order of seconds (ms). Filter: a device used to eliminate noise, the input or output filtered to obtain a pure contention of the alternating current. Shielding: The use of physical principles, used to isolate the electromagnetic r...

more

How to extend the power supply time of uninterruptible power supply (UPS)

Aug , 03 2024

There are two ways to extend the duration of an uninterruptible power supply： 1. Increase battery capacity. According to the length of time required to increase the number of batteries, but this method will cause a relative increase in battery charging time, but also increase the number of corresponding maintenance equipment, increase product size, resulting in an increase in the overall cost of U...

more

Is the uninterrupted host suitable for computers to reduce hard shutdowns

Aug , 17 2024

The best offline intelligent UPS 3000va 1800w backup battery for desktop computers provides complete power protection to protect connected devices from surges, overvoltage, and undervoltage damage. Is the uninterrupted host suitable for computers? Advanced microprocessor control technology enables UPS to maintain high performance and reliability, effectively operating to reduce en...

more

Four operating modes of UPS

Aug , 23 2024

1、Normal operation mode The principle of the power supply system is that when the utility power is normal, the machine will convert the alternating current of the utility power to direct current, and then charge the battery for use when the power is interrupted; it is emphasized here that the power supply system will not only act when the power is out, such as when the voltage is too low or high, ...

more

Classification of DC Power Supplies

Mar , 01 2025

DC regulated power supply classification methods, according to the type of output power supply DC regulated power supply and AC regulated power supply; according to the connection between the regulated circuit and the load DC regulated power supply series regulated power supply and parallel regulated power supply; according to the operating state of the adjustment tube is divided into linear regul...

more

What Is UPS Input Power Factor and Why It Matters

Apr , 12 2025

Power factor (pf) is the difference between the actual energy consumed in an AC circuit and the apparent power. It will be calculated as a decimal or percentage between 0-1 pf and 0-100%, i.e. 0.9 pF=90%. Meaning of UPS power factor UPS input power factor UPS input power factor is the ratio of UPS input active power to input power. UPS is not only a part of the power supply, but also the load of t...

more

Understanding Instantaneous Load and Charger Capacity Calculation in Substations

Jun , 07 2025

In modern substations, accurate power system design requires a clear understanding of instantaneous (transient) loads and how they impact equipment sizing, particularly for battery chargers in DC systems. This article breaks down the concept of transient loads, their implications, and how to properly calculate charger capacity under such conditions. 1. What Is an Instantaneous (Transient) Load? A ...

more

What are the benefits of high-rate discharge UPS lithium batteries?

Jun , 21 2025

High-Rate Discharge Lithium Battery for UPS: Rapid Backup Power for Critical Applications The primary role of a high-rate discharge lithium battery in an uninterruptible power supply (UPS) system is to deliver a large current output within a short period, ensuring stable operation during sudden power outages or voltage fluctuations. The EverExceed high-voltage UPS lithium battery series is designe...

more

Understanding Sine Wave vs. Square Wave in UPS Systems

Jun , 21 2025

Uninterruptible Power Supplies (UPS) play a crucial role in ensuring the continuity and quality of power for mission-critical applications. One of the most important, yet often overlooked, technical aspects of a UPS system is its output waveform—namely, whether it delivers a sine wave, modified sine wave, or square wave. This waveform directly affects the performance, compatibility, and safety of ...

more

Single-Phase vs. Three-Phase UPS: Which One is Right for Your Business?

Jul , 05 2025

When selecting an Uninterruptible Power Supply (UPS) for your business or organization, understanding the difference between single-phase and three-phase systems is crucial. Both types provide reliable backup power to ensure your equipment continues running during unexpected power disruptions. However, their functionalities differ significantly, especially in large-scale industrial power applicati...

more

Understanding Key UPS Terms: A Comprehensive Glossary for Power Protection

Jul , 11 2025

Understanding Key UPS Terms: A Comprehensive Glossary for Power Protection In today’s fast-paced world, uninterruptible power supplies (UPS) are crucial to ensuring the seamless operation of businesses and industries. Whether you are dealing with electrical outages or power surges, a UPS acts as a safeguard, ensuring that your critical systems remain operational. To help you better navigate the wo...

more

Protecting Digital Substations in a Hostile World: How EverExceed Supports Intelligent Electronics (IEDs)

Jul , 19 2025

In today’s power systems, digital substations have revolutionized control and monitoring with their intelligent electronic devices (IEDs). However, these advanced infrastructures are not immune to threats. In fact, their complexity and sensitivity demand a new level of protection—and that’s where EverExceed comes in. Understanding the Threats to Digital Substations Whether built from the ground up...

more

what are you looking for?

blog

blog