thermal runaway of batteries

Advantages and disadvantages of lithium iron phosphate battery and ternary lithium battery

Sep , 05 2022

1. Energy density: The energy density of ternary lithium is about 1.7 times that of lithium iron phosphate, so the volume and weight of ternary lithium batteries will be smaller than those of lithium iron phosphate batteries, and the car load will be smaller. 2. Safety performance: lithium iron phosphate battery will perform better in acupuncture test, and in high temperature environment, the stab...

more

Failure causes of lithium battery- Failure in the production process

Oct , 08 2022

In the production process, personnel, equipment, raw materials, methods, and the environment are the main factors that affect product quality, and the production process of LiFePO4 power batteries is no exception. Personnel and equipment belong to the category of management, so we mainly discuss the last three influences factor. Failure of batteries caused by impurities in electrode active materia...

more

Failure causes of lithium battery- Failure during recycling

Oct , 08 2022

The battery is generally exothermic during use, so the effect of temperature is very important. In addition, road conditions, usage, ambient temperature, etc. will have different effects. The capacity loss of LiFePO4 power batteries during cycling is generally considered to be caused by the loss of active lithium ions. The research shows that the aging of LiFePO4 power battery during cycling is ma...

more

Failure causes of lithium battery- Failure during charging and discharging

Oct , 08 2022

The battery is often overcharged in the process of use. Relatively speaking, the overdischarge situation is less. The heat released during the overcharge or overdischarge process is easy to accumulate inside the battery, which will further increase the battery temperature. , affecting the service life of the battery and increasing the possibility of the battery catching fire or exploding. Even und...

more

Overview of Si-based anode materials

Oct , 17 2022

The theoretical specific capacity of Si is as high as 4200mAh/g, which is 10 times higher than the theoretical specific capacity of graphite; the lithium intercalation potential of Si is low, which is 0.37mV Li/Li+; and Si is the second most abundant element on the earth, which is not harmful to the environment. Destruction will occur, and the production process of nano-silicon is mature and low-c...

more

What is the 24 hour self discharge test and what precautions should be taken when using a battery?

Oct , 17 2022

What are the commonly used standards for batteries? Commonly used IEC standards for batteries: The standard for nickel-metal hydride batteries is IEC61951-2:2003; the lithium- ion battery industry generally follows UL or national standards.In addition, the commonly used standards for batteries also include the Japanese Industrial Standard JIS C standards for batteries. IEC, the International Elect...

more

What is open circuit voltage and what is the capacity of a battery?

Oct , 17 2022

What is the nominal voltage? The nominal voltage of the battery refers to the voltage displayed during normal operation. The nominal voltage of the secondary nickel-cadmium nickel-hydrogen battery is 1.2V; the nominal voltage of the secondary lithium battery is 3.6V. What is open circuit voltage? The open circuit voltage refers to the potential difference between the positive and negative electrod...

more

What are the reliability and safety test items for batteries?

Oct , 17 2022

What are the reliability test items for batteries? 01) Cycle life 02) Discharge characteristics at different rates 03) Discharge characteristics at different temperatures 04) Charging characteristics 05) Self-discharge characteristics 06) Storage characteristics 07) Overdischarge characteristics 08) Internal resistance characteristics at different temperatures 09) Temperature cycle test 10) Drop t...

more

What kind of conditions are better for batteries to be stored in?

Oct , 24 2022

Can the battery be stored in the appliance after it is used up or if it is not used for a long time? If the electrical appliance will not be used for a long time, it is better to take the battery out and put it in a low temperature and dry place. If not, even if the electrical appliance is turned off, the system will still make the battery have a low current output, which will shorten the battery ...

more

What is the basic operation of inverter?

Nov , 14 2022

What is an Inverter? An inverter converts the DC voltage to an AC voltage. In most cases, the input DC voltage is usually lower while the output AC is equal to the grid supply voltage of either 120 volts, or 240 Volts depending on the country. The inverter may be built as standalone equipment for applications such as solar power, or to work as a backup power supply from batteries which are charged...

more

Are lithium-ion batteries in energy storage systems reliable?

Dec , 05 2022

The most common type of battery used in energy storage systems is Lithium-ion batteries. Lithium-ion batteries allow you to take electricity generated by the grid, solar panels, wind turbines, or any combination and store it for use when you need it most. However, not all lithium-ion batteries are the same when it comes to reliability and safety. Even though they are referred to generically as one...

more

Key market drivers of Energy Storage

Dec , 12 2022

Particularly focusing on battery storage, which is presently the leading technology, our topic is to uncover what has been driving the push for energy storage in current world and what utilities and policymakers have been doing to define battery storage, develop storage markets, and to support ongoing deployment. What is driving the push for energy storage? 1. &n...

more

what are you looking for?

blog

blog