China Power storage,Competitive Price Power storage

Fourier Analysis of input current of Single phase controlled bridge rectifier

Aug , 29 2022

While the use of uncontrolled rectifier circuits remains prominent, for some applications, more control and efficiency is necessary. This can be accomplished through the use of a controlled rectifier circuit in which thyristors connected in a full-bridge configuration adjust the average voltage. Each thyristor has a gate that controls when it turns on. With control circuitry these devices can be o...

more

Things to keep in mind when installing UPS

Sep , 19 2022

During the installation of a UPS system we need to be careful about some certain factors which can hamper our entire operation and threat the reliability of the system. In this series of technical article we are going to explain 12 major problems that need to be paid attention to when installing a UPS system. In this article we are going to explain second 6 of the major problems: 7. Use envi...

more

The basic working principle of the communication power rectifier module

Sep , 19 2022

The rectifier module is a part of the switching power supply system in the communication inverter power supply, and it is also the core part. So what is the basic working principle of the communication power rectifier module? The editor of EVEREXCEED will teach you some knowledge below. The working principle of the high-frequency switching rectifier (rectifier module) is that after the commercial ...

more

How a UPS system works with a Generator

Sep , 19 2022

As weather extremes and storms increase, power outages are likely to continue to rise. According to the U.S. Energy Information Administration, U.S. customers experienced an average of nearly six hours of power interruptions in 2018. If you have invested in a generator, you’ve prepared for when a storm hits, right? Almost. Even with a generator, you still need a battery backup, also known as an Un...

more

Key Factors in Choosing the Right UPS

Sep , 26 2022

You rely on your UPS system for backup if your power goes out, right? But does your UPS have your back? That is, will it provide a bridge of power long enough for what you need? At the very least you will want to save your data and perform a safe shutdown. Your UPS backup battery will only provide power for a set amount of time, known as runtime. In this article, we will provide a step-by-step app...

more

Failure causes of lithium battery- Failure during recycling

Oct , 08 2022

The battery is generally exothermic during use, so the effect of temperature is very important. In addition, road conditions, usage, ambient temperature, etc. will have different effects. The capacity loss of LiFePO4 power batteries during cycling is generally considered to be caused by the loss of active lithium ions. The research shows that the aging of LiFePO4 power battery during cycling is ma...

more

Failure causes of lithium battery- Failure during charging and discharging

Oct , 08 2022

The battery is often overcharged in the process of use. Relatively speaking, the overdischarge situation is less. The heat released during the overcharge or overdischarge process is easy to accumulate inside the battery, which will further increase the battery temperature. , affecting the service life of the battery and increasing the possibility of the battery catching fire or exploding. Even und...

more

Failure causes of lithium battery- Failure in other aspects

Oct , 08 2022

Due to the low intrinsic conductivity of LiFePO4, the morphology and size of the material itself, as well as the influence of conductive agents and binders, are easily manifested. Discussing the two contradictory factors of size and carbon coating , it is found that the impedance of LiFePO4 electrode is only related to the average particle size. The anti-site defect inside LiFePO4 (Fe occupies Li ...

more

What is pulse charging and output power of a battery?

Oct , 24 2022

What is pulse charging? What is the impact on battery performance? Pulse charging generally adopts the method of charging and discharging, that is, charging for 5 seconds and discharging for 1 second, so that most of the oxygen generated during the charging process will be reduced to electrolyte under the discharge pulse. It not only limits the vaporization of the internal electrolyte, but also fo...

more

What kind of conditions are better for batteries to be stored in?

Oct , 24 2022

Can the battery be stored in the appliance after it is used up or if it is not used for a long time? If the electrical appliance will not be used for a long time, it is better to take the battery out and put it in a low temperature and dry place. If not, even if the electrical appliance is turned off, the system will still make the battery have a low current output, which will shorten the battery ...

more

What is round trip efficiency and response time for Energy storage solution?

Oct , 31 2022

Round-Trip Efficiency Round-trip efficiency takes into consideration energy losses from power conversions and parasitic loads (e.g., electronics, heating and cooling, and pumping) associated with operating the energy storage system. This metric is a key determinant of the cost-effectiveness of energy storage technologies. Among energy storage options, compressed-air energy storage (CAES) has the l...

more

Major Interconnection Issues for Energy storage solution

Oct , 31 2022

Major Interconnection Issues Generally, DG-based power systems can operate in independent or stand-alone and grid-connected modes. In fact, in the first mode, the capacity of a DG unit is selected only based on the load requirements. But, in the latter case, this constraint is not determinant. Although the grid-connected operation mode usually is preferred due to the bilateral energy exchanges, th...

more

what are you looking for?

blog

blog