on site fat

Preparation of reduced graphene oxide loaded lead oxide composites for lead carbon batteries

Jun , 07 2023

Graphene is a new type of two-dimensional structure conductive material, which is composed of a single layer of carbon atoms and its basic structural unit is a six-membered ring structure, which has good chemical stability. Moreover, graphene has a high specific surface area, which not only provides a large reaction interface, but also improves the dispersion of surface nanomaterials. The high con...

more

Basic knowledge of filters

Jun , 21 2023

The Line filter is a filter circuit composed of capacitance, inductance and resistance. A filter can effectively filter out a specific frequency point in the power line or frequencies outside of that frequency point, obtaining a specific frequency power signal or eliminating a specific frequency power signal. A filter, as the name suggests, is a device that filters waves. Wave "is a very broad phy...

more

Selection of lead carbon-carbon addition

Jun , 30 2023

The influence of chemical properties such as carbon material type and addition amount on battery performance was studied. Several different types of carbon materials (graphite, carbon black, activated carbon, etc.) were selected and tested for their effects on the negative electrode plate with additional amounts ranging from 0.2% to 4%, as well as hydrogen evolution inhibitors and adhesives. And c...

more

What is a Rack UPS

Jul , 03 2023

IT Racks Have Unique Power Requirements A rack uninterruptible power supply (UPS) system is designed for use within standard 19-inch IT racks or rack-based enclosures. Rack-based UPS systems must be designed to provide maximum power in compact packages with built-in batteries. A rack UPS generally uses from 1U to 12U of vertical rack space. Most rack UPS systems employ either online (double conver...

more

7 Factors to Examine While Choosing a Lithium-Ion Battery Charger

Jul , 20 2023

From confirming an acceptable input voltage to features like protection design and safe charging mode, these factors can help you select the right lithium-ion battery charger 1. Acceptable Input Voltage An input higher than the voltage sustenance capacity of the charger may cause damage to its internal components. Most countries use a battery charger design of the universal global voltage 110-230V...

more

Explanation of power terms related to UPS power supply

Jul , 28 2023

Transient recovery time: The time required for the output voltage to recover to the specified range when the load suddenly changes (0-100%, 100% -0%), usually in milliseconds (ms). Filter: A device used to eliminate noise, filtering the input or output to obtain pure alternating current. Shielding: A means of isolating and blocking electromagnetic radiation using physical principles...

more

Industrial UPS with Ride-through Protection

Jul , 28 2023

Introduction Electrical utilities use reclosers on medium voltage supply to isolate faults caused by events such as lightning strikes, tree branches across lines, or animals making contact with live wires. The result of a recloser operation is a momentary power outage, lasting for up to a few seconds. These outages can cause an unplanned production stoppage which can be very costly. When momentary...

more

How do lithium batteries screen distribution groups?

Sep , 19 2023

The inconsistency between single batteries often causes problems such as too fast capacity decay and short life during the cycle of battery packs. Improving the consistency of batteries is of great significance to the popularization and application of lithium-ion batteries. 1 Inconsistency analysis Definition of inconsistency The inconsistency of the lithium-ion battery pack means that after the s...

more

Storage PCS topology architecture

Oct , 20 2023

The topology of the Power Conversion System (PCS) of electrochemical energy storage system is closely related to the technical route of the electrochemical energy storage system PCS can operate in the following two states and thus shoulder two important functions: 1. The working state of the rectifier: converts the alternating current of the power grid into direct current when charging the battery...

more

Method for providing the service life of valve-controlled closed lead acid Battery (VRLA)?

Nov , 03 2023

1 Temperature affects battery life: thermal runaway causes temperature rise: Valve-controlled closed lead-acid battery (VRLA) charging when the internal gas recombination itself is an exothermal reaction, so that the battery temperature rises, floating charge flow increases, the gas evolution increases, and the battery temperature rises higher, the battery itself is a "poor liquid", tightly assemb...

more

Introduction to Data Center Cabinet Head Cabinet

Nov , 03 2023

The column head cabinet is a cabinet used to allocate and manage one or more columns of cabinets in the same computer room, and has protection functions. In power room, communication equipment room, and large network room, column head cabinet is necessary and also necessary. 1. Basic concept of column head cabinet A column head cabinet is a cabinet located at the top (first position, equivalent to...

more

Common methods in inverter operation command sources, programmable control inputs

Nov , 10 2023

In addition to the frequency signal, there are two basic conditions for the operation of an inverter power supply, which are the operating signal of the inverter power supply. Common methods in the source of inverter operation commands The operation commands of the inverter power supply include start, stop, forward and reverse, forward and reverse, reset, etc. Like the pre rate setting mode of pow...

more

what are you looking for?

blog

blog