nickel cadmium ni cd batteries

Causes of vulcanization in lead-acid batteries

Mar , 08 2024

A lead-acid battery is a common type of battery in which the positive and negative electrodes are composed of lead oxide (PbO2) and sponge lead (Pb), respectively, and the electrolyte is a sulfuric acid solution. Vulcanization is an unavoidable chemical reaction during the use of lead-acid batteries, which may lead to reduced battery capacity and shortened life. The following are the conditions an...

more

What do you need to pay attention to when replacing lead acid with lithium in UPS applications?

Mar , 22 2024

Understand battery characteristics: Before you start switching, be sure to understand the characteristics and operating requirements of lithium batteries. Compared with lead-acid batteries, lithium batteries have a higher energy density and faster charging speed. However, they are also more sensitive and require special charge and discharge management. Select the right lithium battery: Select the ...

more

Why is lithium battery suitable for UPS battery?

Mar , 22 2024

1. High energy density: Lithium batteries have high energy density, that is, batteries can store more energy per unit mass. This means that the relatively small size and weight of lithium batteries can store more power. For UPS applications, this is important because it means that lithium batteries can provide longer backup times. 2. Long cycle life: The life of lithium batteries is usually longer...

more

Impact of high temperature on battery safety performance

Mar , 30 2024

Lithium battery temperature is too high, more than 45℃ Lithium-ion batteries are more and more widely used in people's production and life, which makes its temperature environment become the main point of concern, relatively speaking, lithium batteries are easier to produce safety problems in high temperature environment, therefore, it is necessary to test the high temperature performance of lithi...

more

Advantages of Solar Gel batteries

Apr , 02 2024

Are Gel Batteries Better For Solar? The modern gel battery was invented in 1957. Gel batteries are one of two sealed lead acid batteries, the other being an AGM battery. Sealed lead acid batteries are distinct from other lead acid batteries in that they are maintenance-free What’s in a gel battery? A gel battery is a dry battery since it doesn’t use a liquid electrolyte. In a gel battery, the elec...

more

Harmonic current

Apr , 20 2024

What does harmonic current mean Harmonic current is a collective term for the sinusoidal components whose frequency is an integer multiple of the original periodic current frequency. A harmonic current with a frequency equal to k times the frequency of the original periodic current is called a k-th harmonic current, and all harmonic currents with a frequency greater than 1 are collectively referre...

more

Long-term storage methods for lithium batteries and storage requirements for lithium iron phosphate batteries

Apr , 20 2024

What impact will the lithium battery have after being put aside for a long time? When the lithium battery is idle, due to the nature of the battery itself, self-discharge, passivation of positive and negative electrode materials, electrolyte decomposition and other phenomena will occur. The instability of the negative SEI will lead to the rapid decline of the negative active substance, which is ea...

more

What is the impact of low temperature on lithium batteries and solutions

Apr , 20 2024

The use of lithium batteries in low battery temperature environments is limited. In addition to a severe drop in discharge capacity, lithium batteries cannot be charged when the battery temperature is low. When the battery is charged at low temperature, the lithium ion embedment on the battery graphite electrode and the lithium plating reaction exist simultaneously and compete with each other. Und...

more

Measures to suppress harmonics

May , 11 2024

The fundamental cause of harmonic generation is due to nonlinear loads. When the current flows through the load and does not have a linear relationship with the applied voltage, it forms a non sinusoidal current, resulting in harmonics. The suppression of harmonics in the power system is to reduce or eliminate the harmonic current injected into the system, in order to control the harmonic voltage ...

more

Lead-acid battery failure model

May , 11 2024

The most common failure modes are: - Softening or shedding of the active material. During discharge the lead oxide (PbO2) of the positive plate is transformed into lead sulfate (PbSO4), and back to lead oxide during charging. Frequent cycling will reduce cohesion of the positive plate material due to the higher volume of lead sulfate compared to lead oxide. Corrosion...

more

Differences in communication serial ports

May , 16 2024

RS-232 and RS-485 are two common serial communication standards, with the following main differences between them: Different transmission methods: RS-232 adopts a single end transmission method, and its data signal is relative to the signal ground, usually used for point-to-point communication; RS-485 adopts differential transmission mode, allowing multiple transceivers to be connected on the bus,...

more

Indispensable components of using UPS uninterruptible power supply

May , 25 2024

A UPS uninterruptible power supply is a system device that connects a battery to a mainframe and converts DC power to city power through the modular circuitry of the mainframe inverter. High-efficiency double-conversion UPS with multiple modes of operation purifies power over the rated voltage and frequency range of IT equipment and industrial equipment. In choosing a modular system design, the UP...

more

what are you looking for?

blog

blog