lithium iron phosphate lfp system

Lithium battery failure model-explain the phenomenon of lithium evolution in graphite anode: part-2

Nov , 01 2021

During the long-cycle cycle, the reversible capacity of the lithium-ion battery will continue to decrease due to the reduction of active materials, the precipitation of metal lithium, the continuous consumption of electrolyte, the increase of internal resistance and thermal runaway. Among them, the lithium evolution phenomenon of the graphite negative electrode is the most important cause of batte...

more

Lithium battery failure model-explain the phenomenon of lithium evolution in graphite anode: part-3

Nov , 03 2021

During the long-cycle cycle, the reversible capacity of the lithium-ion battery will continue to decrease due to the reduction of active materials, the precipitation of metal lithium, the continuous consumption of electrolyte, the increase of internal resistance and thermal runaway. Among them, the lithium evolution phenomenon of the graphite negative electrode is the most important cause of batte...

more

Lithium battery failure model-explain the phenomenon of lithium evolution in graphite anode: part-4

Nov , 03 2021

During the long-cycle cycle, the reversible capacity of the lithium-ion battery will continue to decrease due to the reduction of active materials, the precipitation of metal lithium, the continuous consumption of electrolyte, the increase of internal resistance and thermal runaway. Among them, the lithium evolution phenomenon of the graphite negative electrode is the most important cause of batte...

more

What are the formulas to do the battery charger sizing calculation?

Nov , 03 2021

From our long experience of providing industrial battery charger solutions to our customers and partners, we have seen that there are some basic questions that are always asked. One of the basic questions we are always asked by our valuable customers is “what are the formulas needed to do the battery charger sizing calculations?” Here we are sharing the basic formulas for your convenience. . CHARG...

more

Things You Must Know Before Buying A Residential Energy Storage Battery

Nov , 09 2021

With the requirement for energy growing by leaps and bounds in all aspects of life, it is wise to save energy for the future, instead of wasting away the excess. This is where a residential energy storage battery comes into the picture. When attached to the grid-based system, the battery stores sustainable energy and supplies it during the times when you cannot gain access to solar power or other ...

more

Three things the energy storage industry should know about end of battery life

Nov , 12 2021

In the latest update of Circular Energy Storage’s data on the lithium-ion battery end-of-life market we conclude that over 1.2 million tons of waste batteries will be recycled in 2030. Although it sounds like a massive number, the recycling industry is in fact well prepared and will most probably fight for the volumes. This is good news for the energy storage industry, as it is for all other busin...

more

How to implement battery monitoring in a deployable product?

Nov , 27 2021

Standalone ohmic battery monitoring systems designed for data center application are not suited for a genset environment. Although ohmic monitors work, they are expensive (estimated at $2,000 for a 24-volt system), time-consuming to install, and require trained personnel to interpret their data output. To achieve widespread adoption in the genset market any battery monitoring technology will need ...

more

What is Dynamic Boost and how does it works?

Dec , 03 2021

As with the current‐controlled automatic boost system, Dynamic Boost includes no pre‐programmed boost timer. Unlike the current‐controlled automatic boost system, however, Dynamic Boost automatically adjusts boost duration to take into account differing parasitic DC loads and other variables discussed above. The principle behind Dynamic Boost is simple and straightforward. Refer back to Figure 1. ...

more

NiCd versus Lead Acid Starter Batteries for Generator Systems

Dec , 10 2021

Apart from a few special applications that use mechanical cranking, such as spring starters, the greatest percentage of generator set systems utilize 12-volt or 24-volt starter motors. For prime power and standby applications, the two most commonly used battery types are lead acid or nickel cadmium (NiCd). This article discusses the differences between NiCd and Lead Acid starter batteries for gene...

more

What is the Life Expectancy of a Lithium Battery for a stationary application?

Dec , 10 2021

One of the key attractions for moving to lithium batteries is the battery life being multiples of what is possible with lead-acid batteries. Yet, with limited operating data in UPS applications available today, it’s natural for potential users to question how long lithium batteries will actually last. To address this question, it’s necessary to first understand how lithium battery packs degrade un...

more

Seven good reason for installing a Battery monitoring system

Dec , 17 2021

A battery management system allows users to monitor individual cells within a battery pack. As cells work together to release energy to the load, it is crucial to maintain stability throughout the whole pack. This is where a battery management system (BMS) comes into play. A BMS allows for constant monitoring, gathering, and communicating information to an external interface where users can observ...

more

Which battery is suitable for your application?

Dec , 30 2021

As a leading energy storage solutions provider, we offer various types of maintenance-free batteries, each with its own specific characteristics. More information hereafter about the properties of gel, AGM and Lithium Ion batteries. The Gel battery With flooded lead-acid batteries, which use a liquid electrolyte of water and sulphuric acid, the water is separated into hydrogen and oxygen during ch...

more

what are you looking for?

blog

blog