China High frequency chargers,Competitive Price High frequency chargers

The reasons why Hybrid Inverter should be used?

Aug , 31 2021

The Solar Inverter is an integral part of the entire power system. There are plenty of options available when it comes to selecting a solar inverter: these inverters vary in size, efficiency, performance, and capabilities. If you’re thinking about adding a battery to your solar panel system now or in the future, you may want to consider installing a hybrid inverter. What is hybrid inverter: An inv...

more

Pros and Cons of solar inverters string inverters, micro inverters and power optimizers

Sep , 01 2021

With the increased interest in renewable energy sources across the globe, inverter technology has been steadily evolving over the past several decades to better enable homeowners to reap maximum power from their PV systems. Both string inverters and micro-inverters do this job for you as a solar homeowner, but go about the process in different ways. Continuing from the previous weeks about basic i...

more

Suitability of competing charging solutions in Genset applications

Dec , 10 2021

Instead of polyethylene, AGM type SLI batteries typically employ separators made of fiberglass. Because fiberglass does not oxidize like organic polyethylene, float charging at the battery manufacturer’s recommended float voltage is not inherently harmful to AGM type SLI batteries. Therefore, the intermittent charging method discussed is unlikely to increase the life of AGM type batteries. The dif...

more

The structure and related advantages of the thyristor rectifier of the charger

Mar , 28 2022

Silicon controlled rectifier is a power control appliance based on thyristor (power electronic power device) and with intelligent digital control circuit as the core. It has many advantages such as high efficiency, no mechanical noise and wear, fast response speed, small size and light weight. The characteristics of the silicon controlled rectifier: it is "triggered". However, if a reverse voltage...

more

Battery charging tutorial-Part 1

Apr , 18 2022

Current battery charging technology relies on microprocessors (computer chips) to recharge; using 3 stages (or 2 or 4 stages) regulated charging. These are the "smart chargers", and quality units generally are not found in discount stores. The three stages or steps in lead/acid battery charging are bulk, absorption, and float. Qualification or equalization is sometimes considered another stage. A ...

more

Uninterruptible Power System-Use of Inverters & Chargers

May , 09 2022

If you already have a pretty good idea about the available methods for converting ac power to dc power, an inverter covers the other direction: changing dc into ac. Normally, when we speak of an inverter, we mean a device that generates line frequency power from a dc source, to power conventional ac-powered loads such as a personal computer, or industrial controls and instrumentation. A UPS integr...

more

High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-1)

Jun , 13 2022

Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...

more

High Frequency / High Ripple Resonant Chargers: Good or Bad? (part-2)

Jun , 13 2022

Battery charging is a complex electrochemical process, in which the discharged electric energy is replenished from the electric power grid. This is accomplished using a battery charger, which is an electrical/electronic device that converts the incoming AC line voltage into a regulated DC voltage to meet the charging needs of the respective battery. In a series of articles we are going to explain ...

more

What types of monitoring and recording devices are suited for high rate charging?

Jun , 20 2022

The higher the charging rate, the more critical it is to monitor the charging process to prevent permanent capacity loss. In efforts to preserve battery life, Fast and Opportunity charging incorporates a method of monitoring battery electrolyte temperature and/or internal resistance and adjusting charging current as necessary. Although these monitoring devices can have a very positive impact on ba...

more

Advantages of Modular UPS

Aug , 01 2022

Generally speaking, the advertised modular UPS has the following advantages: Easy to use, easy to install and expand High availability and easy maintenance Expansion on demand, saving initial investment Module hibernation improves efficiency and saves operating costs Intelligent network managem...

more

Do Ferro resonant chargers still have a place in battery charging?

Aug , 15 2022

One of the larger battery/charger companies selling chargers in the USA have announced that they are no longer manufacturing Ferro resonant chargers and have set 7/31/15 as the last date to accept orders.Is there something wrong with Ferro resonant charging that should make all charger companies follow that lead? Let’s consider Ferro resonant technology. The purpose of a Ferro resonant transformer...

more

Improving Access to Forklift Battery Chargers

Aug , 15 2022

Is the design of your battery room holding your operation back? As valuable as battery room space can be, you need to make sure toprotect access to battery chargers and other crucial equipment when planning your layout. Crowded battery rooms detract significantly from operational efficiency by placing obstacles between workers and the equipment in need of standard maintenance. If a battery charger...

more