English

what are you looking for?

Blog
Critical power

b

home |

Critical power

  • Five things that shorten the life of your UPS battery

    Five things that shorten the life of your UPS battery

    Jun , 26 2024
    One of the more common questions we get asked is how long a UPS battery will last. The ballpark, general answer is 3 to 5 years; however that answer is generallyl. And that’s because the life of your battery depends on a whole host of factors. Those factors are what we’re going to discuss today. Here are some of the things that can shorten the lifespan of your UPS battery. Let’s jump right in. Amb...
    more

  • The difference between the first, second, and third levels of distribution boxes

    The difference between the first, second, and third levels of distribution boxes

    Jun , 22 2024
    What do the primary, secondary, and tertiary boxes of a distribution box mean? This is a relative issue. Let's make a hypothesis: a newly built residential area introduces a 10kV incoming line and builds a distribution room. The outgoing line from the low-voltage end of the transformer is 0.4kV to the distribution cabinet (primary distribution cabinet), then the outgoing line is led to the distrib...
    more

  • Differences in communication serial ports

    Differences in communication serial ports

    Jun , 22 2024
    RS-232 and RS-485 are two common serial communication standards, with the following main differences between them: Different transmission methods: RS-232 adopts a single end transmission method, and its data signal is relative to the signal ground, usually used for point-to-point communication; RS-485 adopts differential transmission mode, allowing multiple transceivers to be connected on the bus,...
    more

  • A brief introduction to EMI

    A brief introduction to EMI

    Jun , 14 2024
    What is an active power filter Active Power Filter (APF) is a new type of power electronic device used to dynamically suppress harmonics and compensate reactive power, which can compensate for harmonics and reactive power changes in magnitude and frequency. The reason why the active filter is called active, as the name suggests, the device needs to provide a power supply (to compensate for the har...
    more

  • What are the characteristics of industrial UPS power supplies

    What are the characteristics of industrial UPS power supplies

    Jun , 14 2024
    Industrial UPS power supply needs to focus on the design of the ability to operate in high-temperature environments. Component design must be adapted to the operating requirements of industrial environments, high temperature and high humidity, but also to cope with corrosive gases on the corrosion of the system. Operating continuously at full load under a variety of operating conditions, industria...
    more

  • Methods for reducing ripple voltage

    Methods for reducing ripple voltage

    Jun , 06 2024
    Brief introduction Ripple voltage is a voltage fluctuation in the output of a DC power supply, referring to the AC component of the output voltage. Excessive ripple voltage can have an impact on the normal operation of electronic devices, so reducing ripple voltage is an important issue that needs to be addressed in the power supply design process. This article will introduce some commonly used me...
    more

  • What are the benefits of online UPS and how to improve power quality

    What are the benefits of online UPS and how to improve power quality

    Jun , 06 2024
    What are the benefits of online UPS power supply? The online UPS (uninterruptible power supply) system has  multiple advantages, making it the preferred choice for applications  that require reliable and stable power supply. Continuous power supply One of the main advantages of online UPS is its ability to provide  continuous power supply to connected devices. Online UPS continuousl...
    more

  • Commonly used industrial communication protocols

    Commonly used industrial communication protocols

    May , 31 2024
    1、Modbus protocol (1) Modbus packet type Modbus protocol is an application-layer message transmission protocol that can be transmitted on various media, and the transmission mode is divided into three types: ASCII, RTU (Remote Terminal Control System), and TCP.  There are multiple versions of the Modbus protocol for serial ports, but the following three are the most common: Modbus-RTU: In thi...
    more

  • Characteristics of UPS power supply used in server rooms

    Characteristics of UPS power supply used in server rooms

    May , 31 2024
    1. At the beginning of the bullying load is small, and expansion may occur at a later stage. There must be a redundant design that does not allow the load to be turned off during expansion. 2、It can be used in conjunction with the original generator as a power source or distribution for faulty configurations to ensure the smooth operation of power supply. 3, When a UPS failure, the faulty UPS batt...
    more
first page << 1 ... 15 16 17 18 19 ... 39 >> last page

a total of39 pages

leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact