Blog
  • Efficiency of DC power system

    Efficiency of DC power system

    Jun , 27 2022
    In this article we will explain the efficiency of DC systems and progress to AC systems on the next article. In very basic terms, efficiency is the measure of how much power is not being wasted by a system. More waste is less efficient. In electrical systems, we measure the power entering a system in watts; the unit of measure for work performed. Efficiency is the ratio of (Power-In) -vs. - (Power...
    more
  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-1)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-1)

    Jul , 04 2022
    Temperature is very important for lithium- ion batteries. Low temperature will reduce the electrical performance of lithium- ion batteries (capacity, rate performance), but it can improve the storage life of lithium- ion batteries. High temperature can improve electrical performance (capacity, rate performance), but It will reduce the stability of the electrode/electrolyte interface and cause a ra...
    more
  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-4)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-4)

    Jul , 11 2022
    Continuing from last week’s article, this week we are going to discuss other parameters. 3. Influence of charge and discharge rate The charge and discharge rate characterizes the charge and discharge current of the lithium- ion battery. Therefore, the charge and discharge rate must have a very significant impact on the heat generation power of the lithium-ion battery. , the final temperature and t...
    more
  • Explore and analyze the thermal power of Li- ion cells and battery packs (part-5)

    Explore and analyze the thermal power of Li- ion cells and battery packs (part-5)

    Jul , 11 2022
    Continuing from last week’s article, this week we are going to discuss other parameters. 4. The temperature rise and temperature difference of the battery pack under different working conditions On the basis of the above-mentioned single cell heat generation model, the battery pack model was established by using SOLIDWORKS software to simulate the heat production and the battery pack under differe...
    more
  • Theoretical introduction to an AC power system

    Theoretical introduction to an AC power system

    Jul , 22 2022
    AC Power Systems have plenty more units, terms, measurements, interesting waveforms and math to describe their behavior. Any formulas presented here are for reference and validation only. The intension of this paperis convey the concept without having to seriously crunch numbers. All the terms and formulas interweave so itis difficult to create a flow of one topic to another without skipping aroun...
    more
  • The Importance of Data Centers

    The Importance of Data Centers

    Jul , 22 2022
    What Is A Data Center? In simplistic terms, a data center is fundamentally a huge computer that stores and processes information. They represent a physical facility that companies use to house their critical applications and data. Their design is based on a network of computing and storage resources that enable the delivery of shared applications and data. Any company or organization that handles ...
    more
  • Power Factor and Harmonic Analysis in Single phase AC to DC converter

    Power Factor and Harmonic Analysis in Single phase AC to DC converter

    Aug , 15 2022
    Most of the power conversion applications consist of an AC to DC conversion stage and this DC output is then used for further stages. An AC to DC converter is an integral part ofmost of the electronic equipment as most of these equipment are DC powered [1]. Generally to convert AC toDC a diode bridge rectifier is used. To reduce the ripple in the output voltage a suitable filter capacitor is used ...
    more
  • How a Voltage Regulator Works

    How a Voltage Regulator Works

    Aug , 22 2022
    All voltage regulators utilize the same technology to stabilize the output voltage. The output voltage is sampled (Sampled) through a resistor divider (Resistive Divider) connected to the inverting input terminal (Inverting Input) of the error amplifier (Error Amplifier), and the non-inverting input terminal (Non-inverting Input) of the error amplifier is connected to a reference voltage Vref. The...
    more
  • What are the installation steps for the voltage stabilizer?

    What are the installation steps for the voltage stabilizer?

    Aug , 22 2022
    The voltage stabilizer is composed of voltage stabilizer and constant voltage, control circuit, and servo motor. When the input voltage or load changes, the control circuit performs sampling, comparison and amplification, and then drives the servo motor to rotate, so that the position of the carbon brush of the voltage regulator changes, and the coil turns ratio is automatically adjusted to mainta...
    more
  • Effect of formation current density on battery performance

    Effect of formation current density on battery performance

    Sep , 13 2022
    When graphite is used as the negative electrode active material, there are two types of reactions for the formation of SEI films: two-electron reactions, that is, two electrons participate in the reaction at the same time, and it is easier to generate inorganic lithium salt components; single-electron reactions, that is, only need A reaction that can take place when one electron participates, it i...
    more
  • Why is industrial equipment equipped with voltage regulators

    Why is industrial equipment equipped with voltage regulators

    Sep , 26 2022
    The stable and reliable operation of industrial equipment requires a stable energy supply, that is, high-quality power supply. The current power quality is seriously affected and deteriorating, which has a great impact on the safe use of industrial equipment. [Power supply mainly has the following effects] a. Overvoltage: It will cause the overvoltage alarm of the CNC system, accelerate the aging ...
    more
  • What are the procedures for the correct use of a voltage regulator?

    What are the procedures for the correct use of a voltage regulator?

    Sep , 26 2022
    The voltage stabilizer can be widely used in: electronic computers, precision machine tools, computed tomography (CT), precision instruments, test devices, Elevator lighting, imported equipment and production lines and other places that require stable voltage of the power supply. So what are the procedures for using the voltage regulator correctly? Turn on the power switch of the voltage stabilize...
    more
first page << 1 ... 3 4 5 6 7 ... 13 >> last page

a total of13 pages

leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact