China AC Solution,Competitive Price AC Solution

Explore and analyze the thermal power of Li- ion cells and battery packs (part-1)

Jul , 04 2022

Temperature is very important for lithium- ion batteries. Low temperature will reduce the electrical performance of lithium- ion batteries (capacity, rate performance), but it can improve the storage life of lithium- ion batteries. High temperature can improve electrical performance (capacity, rate performance), but It will reduce the stability of the electrode/electrolyte interface and cause a ra...

more

Explore and analyze the thermal power of Li- ion cells and battery packs (part-3)

Jul , 04 2022

1. Influence of ambient temperature: The following figure shows the battery temperature rise curve (average temperature of 5 sampling points) during 1C charge and discharge process of 55Ah battery at ambient temperatures of 20°C, 27°C and 40°C. From the figure, we can It can be seen that the charging time of the battery at 20°C is 74min and the discharge time is...

more

Explore and analyze the thermal power of Li- ion cells and battery packs (part-4)

Jul , 11 2022

Continuing from last week’s article, this week we are going to discuss other parameters. 3. Influence of charge and discharge rate The charge and discharge rate characterizes the charge and discharge current of the lithium- ion battery. Therefore, the charge and discharge rate must have a very significant impact on the heat generation power of the lithium-ion battery. , the final temperature and t...

more

Explore and analyze the thermal power of Li- ion cells and battery packs (part-5)

Jul , 11 2022

Continuing from last week’s article, this week we are going to discuss other parameters. 4. The temperature rise and temperature difference of the battery pack under different working conditions On the basis of the above-mentioned single cell heat generation model, the battery pack model was established by using SOLIDWORKS software to simulate the heat production and the battery pack under differe...

more

Theoretical introduction to Switch mode converters

Jul , 18 2022

Switch mode power conversion technology dominates nearly every segment of the economy, including demanding aerospace and military power systems that impose requirements more demanding than those imposed by power utilities or industry. Switch mode converters are, for example, successfully hardened against the effects of frequent lightning strikes on aircraft, against the effects of nuclear electrom...

more

Theoretical introduction to an AC power system

Jul , 22 2022

AC Power Systems have plenty more units, terms, measurements, interesting waveforms and math to describe their behavior. Any formulas presented here are for reference and validation only. The intension of this paperis convey the concept without having to seriously crunch numbers. All the terms and formulas interweave so itis difficult to create a flow of one topic to another without skipping aroun...

more

The Importance of Data Centers

Jul , 22 2022

What Is A Data Center? In simplistic terms, a data center is fundamentally a huge computer that stores and processes information. They represent a physical facility that companies use to house their critical applications and data. Their design is based on a network of computing and storage resources that enable the delivery of shared applications and data. Any company or organization that handles ...

more

Power Factor and Harmonic Analysis in Single phase AC to DC converter

Aug , 15 2022

Most of the power conversion applications consist of an AC to DC conversion stage and this DC output is then used for further stages. An AC to DC converter is an integral part ofmost of the electronic equipment as most of these equipment are DC powered [1]. Generally to convert AC toDC a diode bridge rectifier is used. To reduce the ripple in the output voltage a suitable filter capacitor is used ...

more

Power Factor and Harmonic Analysis in PWM converter

Aug , 15 2022

Most of the power conversion applications consist of an AC to DC conversion stage and this DC output is then used for further stages. An AC to DC converter is an integral part of most of the electronic equipment as most of these equipment are DC powered [1]. Generally to convert AC to DC a diode bridge rectifier is used. To reduce the ripple in the output voltage a suitable filter capacitor is use...

more

Battery charging technology over view- SCR chargers

Aug , 22 2022

Battery charging is a complex electrochemical process, in which the discharged electric energy must be replenished from the electric network. The quality of the charging process is critical tothe health and longevity of batteries. As a result, battery chargers play a key role in the life and performance of today’s industrial batteries. A battery charger is an electrical/electronic device that conv...

more

What are the installation steps for the voltage stabilizer?

Aug , 22 2022

The voltage stabilizer is composed of voltage stabilizer and constant voltage, control circuit, and servo motor. When the input voltage or load changes, the control circuit performs sampling, comparison and amplification, and then drives the servo motor to rotate, so that the position of the carbon brush of the voltage regulator changes, and the coil turns ratio is automatically adjusted to mainta...

more

Classification of inverters based on wave type (Pure Sine wave)

Aug , 29 2022

Power inverters can be mainly divided into pure sine wave inverters and modified sine wave inverters according to their waveforms. In fact, there is another type - square wave inverter, the earliest inverter, which is rarely seen now. Pure sine wave inverter The pure sine wave inverter outputs true sine wave alternating current without electromagnetic pollution, which is the same or even better th...

more

what are you looking for?

blog

blog