ac dc power solutions

Lead-acid battery characteristics

Feb , 24 2023

Ⅰ： Electromotive force, internal resistance and terminal voltage of lead-acid battery: 1): Electromotive force: refers to the potential difference between the two poles, which depends on the relative density and temperature of the electrolyte.The relative density temperature coefficient of lead-acid battery is 0.00075, that is, the relative density decreases by 0.00075 when the electrolyte tempera...

more

Effect of ambient temperature on battery life

Mar , 01 2023

1）Temperature will affect battery capacity At different temperatures, the viscosity of the sulfuric acid solution in the battery will be inconsistent. For example, when the battery is at a temperature below 0°C, as the temperature decreases, the resistance of the sulfuric acid solution will continue to increase, which will directly increase the weight of the electrode. The effect of polarization, ...

more

Battery capacity test

Mar , 09 2023

Method 1: offline measurement (1) After fully charging the battery pack disconnected from the power supply system, let it stand for 1-24 hours, and start at the ambient temperature of 25 ℃ ± 5 ℃ Discharge; (2) The terminal voltage of the battery shall be measured before discharge. During discharge, the discharge current time and ambient temperature of the battery shall be measured and recorded The...

more

Peak shaving and smart grids: the new frontier of UPS systems

Mar , 10 2023

The way we use UPS systems today has changed a lot. Technological improvements in UPS efficiency, versatility, and flexibility have enabled Borri to approach nonstandard UPS applications such as peaking shaving and power buffering. These techniques are in turn related to UPS systems being able to fulfill the demand for integration into Smart Grids. In this article, we get a closer look at how peak...

more

How Lithium-ion Batteries Work

Mar , 23 2023

Lithium-ion batteries are popular because they have a number of important advantages over competing technologies: They're generally much lighter than other types of rechargeable batteries of the same size. The electrodes of a lithium-ion battery are made of lightweight lithium and carbon. Lithium is also a highly reactive element, meaning that a lot of energy can be stored in its at...

more

What are the factors that are unfavorable to lead-acid batteries?

Apr , 15 2023

There are many factors that are unfavorable to the battery, mainly in the charging and discharging phase. (1). The "second super" discharge stage is mainly the discharge current overvalue, that is, the discharge exceeds the allowable current value for a long time; the second problem of discharge is over-discharge, that is, exceeding the allowable discharge capacity of the battery, which is called ...

more

Three-stage charging of lead-acid battery

Apr , 15 2023

1. What is the three-stage charging of lead-acid batteries? The charging method of lead-acid batteries should be divided into three stages, namely: constant current charging - constant voltage charging - trickle charging. Constant current charging stage: charge to 13.4V with 0.2C10 A current. Constant voltage charging stage: 2.4V/cell, charging time 3h, cut-off current 0.02C10A Trickle charge phas...

more

What are the reasons for the sulfation of lead-acid battery plates?

Apr , 15 2023

The reasons for plate sulfation are as follows: 1) The initial charging of the battery is insufficient or the initial charging interruption time is long; 2) The battery is insufficiently charged for a long time; 3) Failure to charge in time after discharge; 4) Frequent overcharging or low current deep discharge; 5) If the density of the electrolyte is too high or the temperature is too high, lead ...

more

How UPS and generator can become the complete critical power solutions

Apr , 19 2023

How UPS and generator can become the complete critical power solutions with uninterruptible power and backup power supplies？ A UPS can support its critical load during utility power anomalies and blackouts – but only until its battery autonomy expires. Conversely, an adequately-fuelled generator can support the load indefinitely, but needs time to start up and stabilise. Operators of any data cent...

more

Summary of the Design of Power Battery Management system

Apr , 24 2023

With the increasing number of electric vehicles, battery energy management system is becoming more and more important in addition to looking for batteries with high energy density and high safety. Different power batteries have different properties, and even if the same type of battery properties are inconsistent, in the process of use, there will be the possibility of accidents caused by expansio...

more

How to use UPS power supply to maximize its service life?

May , 16 2023

The UPS power supply room should be a room with an empty and anti-static floor. The lightning protection effect should be good. It should be dustproof, moisture-proof and sunscreen. The input voltage should be within the planning. The most reasonable load planning is 30% - 60%. Full load and overload operation will affect the life of UPS. Maintain at least once a year. However, in practice, it is ...

more

What is an Offline UPS?

May , 16 2023

Standby or Offline UPS is one of the three main types of the static UPS.It is the simplest and least expensive uninterruptible power supply system. Actually, some don’t even consider it as a UPS, because of the presence of a momentary break during transfer or switching. Due to that, an offline UPS is sometimes described as a standby power supply (SPS). Nonetheless, the design employed by the stand...

more

what are you looking for?

blog

blog