Blog
  • Why Are 12V Lead Acid Batteries Commonly Limited to Around 250Ah (C10)?

    Why Are 12V Lead Acid Batteries Commonly Limited to Around 250Ah (C10)?

    Oct , 24 2026
    Introduction When selecting a 12V lead acid battery for UPS systems, telecommunications, solar energy storage, or backup power applications, buyers often notice that many standard products have capacities of 250Ah (C10) or less. Meanwhile, 2V lead acid batteries are widely available in much higher capacities, ranging from several hundred amp-hours to over 3,000Ah. Why is there such a difference? T...
    more
  • Industrial Battery Charger Sizing: How to Choose the Right Capacity

    Industrial Battery Charger Sizing: How to Choose the Right Capacity

    Oct , 29 2026
    Quick Answer Choosing an industrial battery charger with a higher current rating does not automatically make a DC power system more reliable. The right capacity depends on three factors: the continuous DC load, the charging current required to restore the battery after a discharge, and an appropriate design margin. A charger that is too small may operate near its rated capacity and leave insuffici...
    more
  • 48V Telecom Power System: Managing Backup Power and Critical Loads

    48V Telecom Power System: Managing Backup Power and Critical Loads

    Oct , 29 2026
    Quick Answer In a 48V telecom power system, a power outage does not always mean that all equipment will shut down at the same time. When utility power fails, the rectifiers stop supplying normal DC power, and the battery takes over. If the outage continues and the battery voltage drops, the Low Voltage Disconnect (LVD) function may disconnect selected loads to prevent excessive battery discharge. ...
    more
  • The Ultimate Guide to Testing LiFePO4 Batteries: Voltage, Capacity & Health Checks

    The Ultimate Guide to Testing LiFePO4 Batteries: Voltage, Capacity & Health Checks

    Oct , 30 2026
    LiFePO4 (Lithium Iron Phosphate) batteries have become the gold standard for reliable energy storage in RV systems, marine applications, solar installations, and off-grid power setups. Their superior lifespan, safety profile, and stable performance make them a worthwhile investment.   But what happens when your lithium battery stops holding a charge, shows strange voltage readings, or simply ...
    more
  • How Do Grid Power, Diesel Generators, and Batteries Work Together to Keep Remote Telecom Base Stations Powered?

    How Do Grid Power, Diesel Generators, and Batteries Work Together to Keep Remote Telecom Base Stations Powered?

    Nov , 06 2026
    Remote telecom base stations often face challenges when grid power is unstable or unavailable. To maintain a continuous power supply, these sites may rely on a combination of grid power, diesel generators, and battery backup. However, having multiple power sources does not automatically guarantee reliable operation. The real challenge is coordinating when each source takes over, how the rectifier ...
    more
  • Customized UPS and High-Voltage Lithium Battery Solutions for Critical Power Applications

    Customized UPS and High-Voltage Lithium Battery Solutions for Critical Power Applications

    Nov , 06 2026
    Reliable backup power is essential for facilities where even a brief power interruption can affect operational continuity, equipment safety, and service availability. From public utilities and wastewater treatment plants to modern data centers, UPS systems must deliver stable power while meeting specific requirements for backup duration, load capacity, installation space, and system integration. C...
    more
  •  Why Does the Telecom Industry Use -48V DC? The Long-Standing Choice Behind Power Safety and Corrosion Control

    Why Does the Telecom Industry Use -48V DC? The Long-Standing Choice Behind Power Safety and Corrosion Control

    Nov , 10 2026
    From historical practice to modern telecom power systems, -48V was not an arbitrary choice. In telecom power systems, -48V does not mean that every point inside the equipment is 48V below ground. In a common system configuration, the positive DC pole is connected to the ground reference, while the negative pole serves as the power supply rail. Therefore, when measured relative to ground, the negat...
    more
  • How to Plan a High-Voltage UPS Battery System for Reliable Backup Power and Future Expansion

    How to Plan a High-Voltage UPS Battery System for Reliable Backup Power and Future Expansion

    Nov , 12 2026
    As data centers, industrial facilities, and critical infrastructure continue to expand, reliable backup power has become increasingly important. A well-designed UPS battery system must not only provide sufficient backup power during outages but also accommodate future changes in load demand, runtime requirements, and facility capacity. High-voltage lithium battery systems are becoming an increasin...
    more
  • Why Do Devices Restart When UPS Output Voltage Is Normal? Check Grounding and Common-Mode Noise

    Why Do Devices Restart When UPS Output Voltage Is Normal? Check Grounding and Common-Mode Noise

    Nov , 17 2026
    Quick Answer When servers, instruments or communication devices restart intermittently despite normal UPS output voltage and frequency, the cause may not be the UPS itself. Neutral-to-ground voltage (N-PE), common-mode noise, grounding impedance and cable connections can also affect sensitive electronic loads. A reliable diagnosis should go beyond checking the UPS output voltage. It should examine...
    more
first page << 1 ... 27 28 29 last page

a total of29 pages

leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact