China NiCd batteries,Competitive Price NiCd batteries

What are the formulas to do the battery charger sizing calculation?

Nov , 03 2021

From our long experience of providing industrial battery charger solutions to our customers and partners, we have seen that there are some basic questions that are always asked. One of the basic questions we are always asked by our valuable customers is “what are the formulas needed to do the battery charger sizing calculations?” Here we are sharing the basic formulas for your convenience. . CHARG...

more

Things You Must Know Before Buying A Residential Energy Storage Battery

Nov , 09 2021

With the requirement for energy growing by leaps and bounds in all aspects of life, it is wise to save energy for the future, instead of wasting away the excess. This is where a residential energy storage battery comes into the picture. When attached to the grid-based system, the battery stores sustainable energy and supplies it during the times when you cannot gain access to solar power or other ...

more

What is the right duration of Phase 2 of a charging cycle?

Nov , 27 2021

The duration of Phase 1 is determined by the battery’s depth of discharge, the ratio of charger ampacity to battery capacity, and whether there are parasitic DC loads connected to the system. Although the duration of Phase 1 does vary, we are not concerned with this variation since, once the battery capacity, charger output, and DC loads are installed, we have no means to change the duration of Ph...

more

NiCd versus Lead Acid Starter Batteries for Generator Systems

Dec , 10 2021

Apart from a few special applications that use mechanical cranking, such as spring starters, the greatest percentage of generator set systems utilize 12-volt or 24-volt starter motors. For prime power and standby applications, the two most commonly used battery types are lead acid or nickel cadmium (NiCd). This article discusses the differences between NiCd and Lead Acid starter batteries for gene...

more

Characteristics of Lead Acid and Nickel Cadmium Batteries for Generator starting application

Dec , 10 2021

The charger strips electrons from the cathode leaving it with a net positive charge and forces those electrons onto the anode giving it a negative charge. The energy pumped into the cell transforms the active chemicals back to their original state. The generator set industry primarily uses an automatic type battery charger for standby applications. The system designer selects the battery type on i...

more

What is the Life Expectancy of a Lithium Battery for a stationary application?

Dec , 10 2021

One of the key attractions for moving to lithium batteries is the battery life being multiples of what is possible with lead-acid batteries. Yet, with limited operating data in UPS applications available today, it’s natural for potential users to question how long lithium batteries will actually last. To address this question, it’s necessary to first understand how lithium battery packs degrade un...

more

Some frequently asked questions for Batteries-Part 1

Dec , 31 2021

From our long experience of providing battery solutions to our customers and partners, we have seen that there are some basic questions that are always asked. Here we are sharing some of the common questions and their answers regarding the batteries for your convenience. How long will it take before my battery is discharged? This depends on its capacity and the amount of power consumed by the conn...

more

NiCd vs Lithium batteries (part-1)

Feb , 21 2022

NiCad (Nickel Cadmium) batteries ruled over the market for years. However, in recent years, they are getting challenged by newer Lithium-Ion batteries. Why? Well, we cannot tell you that in brief. It indeed requires a vivid discussion. To make the discussion or contrast evident, here, we shall dwell on various respects i.e. their history, electrochemistry, manufacturing cost, environmental im...

more

NiCd vs Lithium batteries (part-2)

Feb , 21 2022

NiCad (Nickel Cadmium) batteries ruled over the market for years. However, in recent years, they are getting challenged by newer Lithium-Ion batteries. Why? Well, we cannot tell you that in brief. It indeed requires a vivid discussion. To make the discussion or contrast evident, here, we shall dwell on various respects i.e. their history, electrochemistry, manufacturing cost, environmental im...

more

NiCd vs Lithium batteries (part-3)

Feb , 21 2022

NiCad (Nickel Cadmium) batteries ruled over the market for years. However, in recent years, they are getting challenged by newer Lithium-Ion batteries. Why? Well, we cannot tell you that in brief. It indeed requires a vivid discussion. To make the discussion or contrast evident, here, we shall dwell on various respects i.e. their history, electrochemistry, manufacturing cost, environmental im...

more

Using carbon material in manufacturing process of VRLA battery

Mar , 02 2022

Several types of carbon find various uses in many types of electrochemical power sources. In this article, we focus on implementations of its elemental forms in presently used lead-acid batteries, as well as potential future improvements to their construction that carbon can bring. Unique properties of carbon and a variety of its allotropes allow it to find a use in different parts of lead-acid ba...

more

What are the differences among lithium batteries?

Apr , 06 2022

Are all the lithium batteries same? No! In fact there are a group of related family chemistries. The battery industry highlights six common variants along with the chemistry characteristic details of those most applicable for your application. Below the 6 common types of lithium ion battery are shown in the table: Chemistry Lithium Cobalt Oxide Lithium Manganese Oxide Lithium Nickel Manganese Lith...

more

what are you looking for?

blog

blog