lead acid replacement

Using carbon material in manufacturing process of VRLA battery

Mar , 02 2022

Several types of carbon find various uses in many types of electrochemical power sources. In this article, we focus on implementations of its elemental forms in presently used lead-acid batteries, as well as potential future improvements to their construction that carbon can bring. Unique properties of carbon and a variety of its allotropes allow it to find a use in different parts of lead-acid ba...

more

Some FAQ about the Lithium batteries for UPS

Apr , 06 2022

What are the primary benefits of switching to lithium based UPS batteries? The most common reason cited is the significantly longer service life. Lithium also provides a greater cycle life (the number of charge/discharge cycles ranges from extends into the thousands, versus approximately 500-600 for VRLA batteries), as well as a longer warranty. Furthermore, the lighter weight and smaller footprin...

more

Battery charging tutorial-Part 2

Apr , 18 2022

Equalization Equalization is essentially a controlled over charge. Some charger manufacturers call the peak voltage the charger attains at the end of the BULK mode (absorption voltage) an equalization voltage, but technically it's not. Higher capacity wet (flooded) batteries sometimes benefit from this procedure , particularly the physically tall batteries. The electrolyte in a wet battery can str...

more

How to do Battery charger Sizing?

May , 09 2022

In this article we will discuss the La Marche method for sizing a battery charger. There are a few pieces of information that must be gathered before the charger size can be calculated. The required information is as follows: – What is the maximum load in amps? – What is the battery backup time needed? – What is the required recharge time? – What is the battery type (Lead acid or Ni-Cad) and the n...

more

Battery charger options (part-2)

May , 16 2022

In this series of articles we will discuss the options you can have in your battery charger. You can check out these options for choosing your desired battery charger solution. Alarm and Auxiliary Switches Breakers can be equipped with either an Alarm Switch or an Auxiliary Switch. They allow the customer to remotely monitor the status of the breaker telling them if it is tripped or open/closed. T...

more

Effect of formation current density on battery performance

Sep , 13 2022

When graphite is used as the negative electrode active material, there are two types of reactions for the formation of SEI films: two-electron reactions, that is, two electrons participate in the reaction at the same time, and it is easier to generate inorganic lithium salt components; single-electron reactions, that is, only need A reaction that can take place when one electron participates, it i...

more

Answers to the characteristics of lead-acid batteries

Feb , 16 2023

1. How AGM vs Lead Acid Batteries Work The AGM battery and the standard lead acid battery are technically the same when it comes to their base chemistry. They both use lead plates and an electrolyte mix of sulfuric acid and water and have a chemical reaction that produces hydrogen and oxygen as a byproduct. However, this is when they start to diverge. Here’s how: A. Flooded Lead Acid Battery The f...

more

Lead-acid battery characteristics

Feb , 24 2023

Ⅰ： Electromotive force, internal resistance and terminal voltage of lead-acid battery: 1): Electromotive force: refers to the potential difference between the two poles, which depends on the relative density and temperature of the electrolyte.The relative density temperature coefficient of lead-acid battery is 0.00075, that is, the relative density decreases by 0.00075 when the electrolyte tempera...

more

Effect of ambient temperature on battery life

Mar , 01 2023

1）Temperature will affect battery capacity At different temperatures, the viscosity of the sulfuric acid solution in the battery will be inconsistent. For example, when the battery is at a temperature below 0°C, as the temperature decreases, the resistance of the sulfuric acid solution will continue to increase, which will directly increase the weight of the electrode. The effect of polarization, ...

more

What are the factors that are unfavorable to lead-acid batteries?

Apr , 15 2023

There are many factors that are unfavorable to the battery, mainly in the charging and discharging phase. (1). The "second super" discharge stage is mainly the discharge current overvalue, that is, the discharge exceeds the allowable current value for a long time; the second problem of discharge is over-discharge, that is, exceeding the allowable discharge capacity of the battery, which is called ...

more

Three-stage charging of lead-acid battery

Apr , 15 2023

1. What is the three-stage charging of lead-acid batteries? The charging method of lead-acid batteries should be divided into three stages, namely: constant current charging - constant voltage charging - trickle charging. Constant current charging stage: charge to 13.4V with 0.2C10 A current. Constant voltage charging stage: 2.4V/cell, charging time 3h, cut-off current 0.02C10A Trickle charge phas...

more

What are the reasons for the sulfation of lead-acid battery plates?

Apr , 15 2023

The reasons for plate sulfation are as follows: 1) The initial charging of the battery is insufficient or the initial charging interruption time is long; 2) The battery is insufficiently charged for a long time; 3) Failure to charge in time after discharge; 4) Frequent overcharging or low current deep discharge; 5) If the density of the electrolyte is too high or the temperature is too high, lead ...

more

what are you looking for?

blog

blog