lead acid battery production

Effect of temperature on the performance of lead-acid batteries
Sep , 18 2023
What are the effects of temperature on the performance of lead-acid batteries? From the chemical reaction equation of lead-acid batteries, PbO2 is on the positive plate, and Pb is on the negative plate. The electrical and physical properties of these two substances vary very little with temperature, so it can be said that the temperature effect of the discharge performance of lead-acid batteries i...
more
Lead-acid battery thermal runaway failure analysis when the battery is in the state of charge
Sep , 04 2023
Lead acid battery thermal runaway fault analysis When the battery is charged: There is a cumulative increase in battery temperature. When the heat accumulates to a certain extent during the warming process, the battery terminal voltage will suddenly decrease, forcing the current to increase suddenly, and the phenomenon of high battery temperature and damage to the battery is called thermal runaway...
more
Why choose gel batteries?
Aug , 22 2023
The colloidal lead-acid battery is an improvement of the ordinary lead-acid battery with liquid electrolyte. The sulfuric acid electrolyte is replaced by a colloidal electrolyte, and the safety, power storage, discharge performance, and service life are improved compared with the ordinary battery. The colloidal lead-acid battery adopts a gel-like electrolyte; no free liquid is inside. Under the sa...
more
Characteristics and principle of OPzV colloidal battery
Aug , 09 2023
OPzV is made of high-purity nano-scale materials, which can greatly extend the battery life: Principles and features: (1) can effectively inhibit the delamination of lead-acid battery electrolyte, dendrite short circuit and other problems. (2) The adsorption of colloid reduces the supersaturation of PbSO4 and produces loose porous PbSO4: (3) Delay the formation of PbSO4 dense crystalline layer and...
more
Effect of carbon black content on negative electrode performance of lead-acid battery
Aug , 04 2023
VRLA battery is not ideal in electric vehicles because of its short life under deep charge and discharge cycle conditions. In recent years, with the improvement of positive plate grid materials, the cycle life of batteries has been improved, and the main reason for the failure of VRLA batteries for electric vehicles is the sulfation of the negative electrode. To this end, there are more studies on...
more
Selection of lead carbon-carbon addition
Jun , 30 2023
The influence of chemical properties such as carbon material type and addition amount on battery performance was studied. Several different types of carbon materials (graphite, carbon black, activated carbon, etc.) were selected and tested for their effects on the negative electrode plate with additional amounts ranging from 0.2% to 4%, as well as hydrogen evolution inhibitors and adhesives. And c...
more
Preparation of lead-reduced graphene oxide nanocomposites and their applications
Jun , 14 2023
The shortcomings of lead-acid batteries are: low energy density and short cycle life. Lead sulfate formed by the negative plate of the lead-acid battery during the discharge process, after the battery is placed, the small particles of lead sulfate will be converted into large particles of lead sulfate, and the large particles of lead sulfate will not be converted into lead during the charging proc...
more
Preparation of reduced graphene oxide loaded lead oxide composites for lead carbon batteries
Jun , 07 2023
Graphene is a new type of two-dimensional structure conductive material, which is composed of a single layer of carbon atoms and its basic structural unit is a six-membered ring structure, which has good chemical stability. Moreover, graphene has a high specific surface area, which not only provides a large reaction interface, but also improves the dispersion of surface nanomaterials. The high con...
more
Negative electrode formula for high temperature performance of lead-acid battery
Jun , 07 2023
Negative electrode formulation for high-temperature performance of lead-acid batteries (containing the first hydrogen evolution inhibitor Bi2O2CO3 and the second hydrogen evolution inhibitor ZnO). The basic formula of the negative electrode (number of weight) is: 100 parts lead powder, 8 ~ 11 parts dilute sulfuric acid, 9 ~ 13 parts deionized water, 0.06 ~ 0.14 parts short fiber, 0.10 ~ 0.20 parts...
more