China industrial batteries,Competitive Price industrial batteries

What are the reasons for the sulfation of lead-acid battery plates?

Apr , 15 2023

The reasons for plate sulfation are as follows: 1) The initial charging of the battery is insufficient or the initial charging interruption time is long; 2) The battery is insufficiently charged for a long time; 3) Failure to charge in time after discharge; 4) Frequent overcharging or low current deep discharge; 5) If the density of the electrolyte is too high or the temperature is too high, lead ...

more

What are the installation steps of the pressurizer?

Apr , 23 2023

The voltage stabilizer is composed of constant voltage, control circuit and servo motor. When the input voltage or load changes, the control circuit samples, compares and amplifies, and then drives the servo motor to rotate to change the position of the carbon brush of the voltage regulator. By automatically adjusting the coil turn ratio, the output voltage is stable. What are the installation ste...

more

Summary of the Design of Power Battery Management system

Apr , 24 2023

With the increasing number of electric vehicles, battery energy management system is becoming more and more important in addition to looking for batteries with high energy density and high safety. Different power batteries have different properties, and even if the same type of battery properties are inconsistent, in the process of use, there will be the possibility of accidents caused by expansio...

more

Charge and discharge theory and calculation method design of lithium battery

May , 13 2023

1 . Production of lithium Ion battery 1 .1 State Of Charge ( state-of-charge; S OC) Soc can be defined as the state of available electrical energy in the battery, usually expressed as a percentage. Because the available electric energy varies with charging and discharging current, temperature, and aging phenomenon, the definition Of the State of Charge is also divided into two types: Absolute stat...

more

Introduction of industrial and commercial energy storage and analysis of income mode

May , 15 2023

Industrial and commercial energy storage system composition Industrial and commercial energy storage systems and energy storage power station systems include battery systems +BMS, PCS, EMS, transformers, racks, connecting cables, busbar cabinets, lightning protection, and grounding systems, monitoring and alarm systems, etc. Industrial and commercial energy storage systems are different from large...

more

The UPS technical glossary

May , 23 2023

This ups technical glossary is designed to help you to understand the technical terms used within the uninterruptible power supply (UPS) industry. A AC ripple Is the residual periodic variation of the DC voltage withina UPS which has been derived from an unwelcome alternating (AC) source. An AC ripple causes internal heating and deterioration of the UPS battery poles and so should be prevented fom...

more

Negative electrode formula for high temperature performance of lead-acid battery

Jun , 07 2023

Negative electrode formulation for high-temperature performance of lead-acid batteries (containing the first hydrogen evolution inhibitor Bi2O2CO3 and the second hydrogen evolution inhibitor ZnO). The basic formula of the negative electrode (number of weight) is: 100 parts lead powder, 8 ~ 11 parts dilute sulfuric acid, 9 ~ 13 parts deionized water, 0.06 ~ 0.14 parts short fiber, 0.10 ~ 0.20 parts...

more

Preparation of reduced graphene oxide loaded lead oxide composites for lead carbon batteries

Jun , 07 2023

Graphene is a new type of two-dimensional structure conductive material, which is composed of a single layer of carbon atoms and its basic structural unit is a six-membered ring structure, which has good chemical stability. Moreover, graphene has a high specific surface area, which not only provides a large reaction interface, but also improves the dispersion of surface nanomaterials. The high con...

more

Why Choose a Lithium-Ion UPS Battery?

Jun , 21 2023

Although lithium-ion UPS systems have been around for decades, most people have been hesitant to choose this option because they were more expensive. With the onset of advanced battery technology, lithium-ion UPS systems have become much more attractive due to reduced pricing that rivals most standard, lead-acid battery UPS systems. UPS systems feature a state-of-the-art lithium iron phosphate (Li...

more

Lithium battery capacity loss cause analysis

Jun , 21 2023

Lithium-ion batteries are the fastest-developing secondary batteries after cadmium-nickel and nickel-hydrogen batteries. Its high-energy properties make its future look bright. However, lithium-ion batteries are not perfect, and their biggest problem is the stability of their charge-discharge cycle. This paper summarizes and analyzes the possible causes of capacity attenuation of Li-ion batteries,...

more

Selection of lead carbon-carbon addition

Jun , 30 2023

The influence of chemical properties such as carbon material type and addition amount on battery performance was studied. Several different types of carbon materials (graphite, carbon black, activated carbon, etc.) were selected and tested for their effects on the negative electrode plate with additional amounts ranging from 0.2% to 4%, as well as hydrogen evolution inhibitors and adhesives. And c...

more

Industrial UPS with Ride-through Protection

Jul , 28 2023

Introduction Electrical utilities use reclosers on medium voltage supply to isolate faults caused by events such as lightning strikes, tree branches across lines, or animals making contact with live wires. The result of a recloser operation is a momentary power outage, lasting for up to a few seconds. These outages can cause an unplanned production stoppage which can be very costly. When momentary...

more

what are you looking for?

blog

blog