China everexceed ups,Competitive Price everexceed ups

What Is UPS Input Power Factor and Why It Matters

Apr , 12 2025

Power factor (pf) is the difference between the actual energy consumed in an AC circuit and the apparent power. It will be calculated as a decimal or percentage between 0-1 pf and 0-100%, i.e. 0.9 pF=90%. Meaning of UPS power factor UPS input power factor UPS input power factor is the ratio of UPS input active power to input power. UPS is not only a part of the power supply, but also the load of t...

more

The reason why LiFePO4 batteries cannot be charged but can be discharged below 0℃

Jun , 07 2025

Why LiFePO4 Batteries Cannot Be Charged Below 0°C but Can Still Discharge The reason why LiFePO4 (Lithium Iron Phosphate) batteries, such as the EverExceed battery range, cannot be charged below 0°C yet can still discharge lies mainly in their electrochemical characteristics and safety considerations. 1. Why Charging Is Restricted at Low Temperatures Lithium Plating Risk: At sub-zero temperatures,...

more

What are the differences between energy storage battery management systems and power battery management systems?

Jun , 13 2025

The energy storage battery management system (BMS) and the power battery BMS are very similar in overall structure and core functions, but due to different application scenarios, there are obvious differences between the two in design logic, communication protocol, hardware structure, etc. Especially in high-security and high-scalability energy storage systems represented by EverExceed, BMS not on...

more

What are the benefits of high-rate discharge UPS lithium batteries?

Jun , 21 2025

High-Rate Discharge Lithium Battery for UPS: Rapid Backup Power for Critical Applications The primary role of a high-rate discharge lithium battery in an uninterruptible power supply (UPS) system is to deliver a large current output within a short period, ensuring stable operation during sudden power outages or voltage fluctuations. The EverExceed high-voltage UPS lithium battery series is designe...

more

Understanding Sine Wave vs. Square Wave in UPS Systems

Jun , 21 2025

Uninterruptible Power Supplies (UPS) play a crucial role in ensuring the continuity and quality of power for mission-critical applications. One of the most important, yet often overlooked, technical aspects of a UPS system is its output waveform—namely, whether it delivers a sine wave, modified sine wave, or square wave. This waveform directly affects the performance, compatibility, and safety of ...

more

Single-Phase vs. Three-Phase UPS: Which One is Right for Your Business?

Jul , 05 2025

When selecting an Uninterruptible Power Supply (UPS) for your business or organization, understanding the difference between single-phase and three-phase systems is crucial. Both types provide reliable backup power to ensure your equipment continues running during unexpected power disruptions. However, their functionalities differ significantly, especially in large-scale industrial power applicati...

more

Understanding Key UPS Terms: A Comprehensive Glossary for Power Protection

Jul , 11 2025

Understanding Key UPS Terms: A Comprehensive Glossary for Power Protection In today’s fast-paced world, uninterruptible power supplies (UPS) are crucial to ensuring the seamless operation of businesses and industries. Whether you are dealing with electrical outages or power surges, a UPS acts as a safeguard, ensuring that your critical systems remain operational. To help you better navigate the wo...

more

Protecting Digital Substations in a Hostile World: How EverExceed Supports Intelligent Electronics (IEDs)

Jul , 19 2025

In today’s power systems, digital substations have revolutionized control and monitoring with their intelligent electronic devices (IEDs). However, these advanced infrastructures are not immune to threats. In fact, their complexity and sensitivity demand a new level of protection—and that’s where EverExceed comes in. Understanding the Threats to Digital Substations Whether built from the ground up...

more

The Impact of High Temperatures on Lead-Acid Batteries and Recommended Solutions

Jul , 19 2025

Lead-acid batteries are widely used in energy storage, telecom base stations, and UPS systems. However, their performance is significantly affected by ambient temperature—especially under high-temperature conditions, which can lead to rapid degradation and potential safety risks. Below are six key impacts of high temperature on lead-acid batteries and how to address them: 1. Short-Term Capacity Ga...

more

Lithium Battery Applications in UPS Systems: Advantages and Challenges

Aug , 02 2025

The Rise of Lithium Batteries in UPS Applications Lithium batteries have gained significant traction in the UPS (Uninterruptible Power Supply) market, offering notable advantages over traditional lead-acid batteries. These benefits include longer lifespan, smaller size, lighter weight, and faster charging. As the cost of lithium batteries continues to fall and UPS manufacturers improve system comp...

more

Why EverExceed Ni-Cd Batteries Use Potassium Hydroxide (KOH) as Electrolyte

Aug , 22 2025

When it comes to industrial-grade energy storage, nickel-cadmium (Ni-Cd) batteries remain a trusted choice thanks to their reliability, long service life, and excellent temperature tolerance. A critical factor behind this proven performance is the use of potassium hydroxide (KOH) as the electrolyte. At EverExceed, our advanced Ni-Cd batteries are engineered with optimized KOH formulations to maxim...

more

Safe Storage of Lithium-Ion Batteries | EverExceed

Aug , 29 2025

Lithium-ion batteries are widely used in energy storage, UPS systems, and various industrial applications. To ensure long-term safety and performance, proper storage is essential. EverExceed provides professional guidance on the safe storage of lithium-ion batteries to help customers minimize risks and maintain reliability. Storage Requirements and Recommendations Ambient Temperature dian Optimal:...

more

what are you looking for?

blog

blog