English

what are you looking for?

Blog
Critical power

b

home |

Critical power

  • Failure causes of lithium battery- Failure in other aspects

    Failure causes of lithium battery- Failure in other aspects

    Oct , 08 2022
    Due to the low intrinsic conductivity of LiFePO4, the morphology and size of the material itself, as well as the influence of conductive agents and binders, are easily manifested. Discussing the two contradictory factors of size and carbon coating , it is found that the impedance of LiFePO4 electrode is only related to the average particle size. The anti-site defect inside LiFePO4 (Fe occupies Li ...
    more

  • Failure causes of lithium battery- Failure during charging and discharging

    Failure causes of lithium battery- Failure during charging and discharging

    Oct , 08 2022
    The battery is often overcharged in the process of use. Relatively speaking, the overdischarge situation is less. The heat released during the overcharge or overdischarge process is easy to accumulate inside the battery, which will further increase the battery temperature. , affecting the service life of the battery and increasing the possibility of the battery catching fire or exploding. Even und...
    more

  • Failure causes of lithium battery- Failure during recycling

    Failure causes of lithium battery- Failure during recycling

    Oct , 08 2022
    The battery is generally exothermic during use, so the effect of temperature is very important. In addition, road conditions, usage, ambient temperature, etc. will have different effects. The capacity loss of LiFePO4 power batteries during cycling is generally considered to be caused by the loss of active lithium ions. The research shows that the aging of LiFePO4 power battery during cycling is ma...
    more

  • Failure causes of lithium battery- Failure during shelving

    Failure causes of lithium battery- Failure during shelving

    Oct , 08 2022
    In the service life of the power battery, most of the time is in a state of shelving. Generally, after a long period of shelving, the performance of the battery will decline, generally showing an increase in internal resistance, a decrease in voltage, and a decrease in discharge capacity. There are many factors that cause the degradation of battery performance, among which temperature, state of ch...
    more

  • Failure causes of lithium battery- Failure in the production process

    Failure causes of lithium battery- Failure in the production process

    Oct , 08 2022
    In the production process, personnel, equipment, raw materials, methods, and the environment are the main factors that affect product quality, and the production process of LiFePO4 power batteries is no exception. Personnel and equipment belong to the category of management, so we mainly discuss the last three influences factor. Failure of batteries caused by impurities in electrode active materia...
    more

  • Key Factors in Choosing the Right UPS

    Key Factors in Choosing the Right UPS

    Sep , 26 2022
    You rely on your UPS system for backup if your power goes out, right? But does your UPS have your back? That is, will it provide a bridge of power long enough for what you need? At the very least you will want to save your data and perform a safe shutdown. Your UPS backup battery will only provide power for a set amount of time, known as runtime. In this article, we will provide a step-by-step app...
    more

  • What are the procedures for the correct use of a voltage regulator?

    What are the procedures for the correct use of a voltage regulator?

    Sep , 26 2022
    The voltage stabilizer can be widely used in: electronic computers, precision machine tools, computed tomography (CT), precision instruments, test devices, Elevator lighting, imported equipment and production lines and other places that require stable voltage of the power supply. So what are the procedures for using the voltage regulator correctly? Turn on the power switch of the voltage stabilize...
    more

  • Why is industrial equipment equipped with voltage regulators

    Why is industrial equipment equipped with voltage regulators

    Sep , 26 2022
    The stable and reliable operation of industrial equipment requires a stable energy supply, that is, high-quality power supply. The current power quality is seriously affected and deteriorating, which has a great impact on the safe use of industrial equipment. [Power supply mainly has the following effects] a. Overvoltage: It will cause the overvoltage alarm of the CNC system, accelerate the aging ...
    more

  • How a UPS system works with a Generator

    How a UPS system works with a Generator

    Sep , 19 2022
    As weather extremes and storms increase, power outages are likely to continue to rise. According to the U.S. Energy Information Administration, U.S. customers experienced an average of nearly six hours of power interruptions in 2018. If you have invested in a generator, you’ve prepared for when a storm hits, right? Almost. Even with a generator, you still need a battery backup, also known as an Un...
    more
first page << 1 ... 41 42 43 44 45 ... 76 >> last page

a total of76 pages

about us
products
Solutions
Support
contact us
Send Message
©2026 Shenzhen EverExceed Industrial Co., Ltd.all rights reserved. | sitemap | Xml | Privacy Policy IPv6 network supported
leave a message
welcome to everexceed
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

home

products

about

contact