China Working principle of BMS,Competitive Price Working principle of BMS

Analysis of BMS (Battery Management System) Protection Mechanism and Working Principle

May , 06 2023

I. BMS function First, we'll detail its four main functions. (1) Perception and measurement Measurement is the perception of the state of the battery This is the basic function of BMS, including the measurement and calculation of some index parameters, including voltage, current, temperature, power, SOC (state of charge), SOH (state of health), SOP (state of power), SOE (state of 能源). SOC can be c...

more

Charge and discharge theory and calculation method design of lithium battery

May , 13 2023

1 . Production of lithium Ion battery 1 .1 State Of Charge ( state-of-charge; S OC) Soc can be defined as the state of available electrical energy in the battery, usually expressed as a percentage. Because the available electric energy varies with charging and discharging current, temperature, and aging phenomenon, the definition Of the State of Charge is also divided into two types: Absolute stat...

more

Introduction of industrial and commercial energy storage and analysis of income mode

May , 15 2023

Industrial and commercial energy storage system composition Industrial and commercial energy storage systems and energy storage power station systems include battery systems +BMS, PCS, EMS, transformers, racks, connecting cables, busbar cabinets, lightning protection, and grounding systems, monitoring and alarm systems, etc. Industrial and commercial energy storage systems are different from large...

more

The UPS technical glossary

May , 23 2023

This ups technical glossary is designed to help you to understand the technical terms used within the uninterruptible power supply (UPS) industry. A AC ripple Is the residual periodic variation of the DC voltage withina UPS which has been derived from an unwelcome alternating (AC) source. An AC ripple causes internal heating and deterioration of the UPS battery poles and so should be prevented fom...

more

Basic knowledge of filters

Jun , 21 2023

The Line filter is a filter circuit composed of capacitance, inductance and resistance. A filter can effectively filter out a specific frequency point in the power line or frequencies outside of that frequency point, obtaining a specific frequency power signal or eliminating a specific frequency power signal. A filter, as the name suggests, is a device that filters waves. Wave "is a very broad phy...

more

Lithium battery capacity loss cause analysis

Jun , 21 2023

Lithium-ion batteries are the fastest-developing secondary batteries after cadmium-nickel and nickel-hydrogen batteries. Its high-energy properties make its future look bright. However, lithium-ion batteries are not perfect, and their biggest problem is the stability of their charge-discharge cycle. This paper summarizes and analyzes the possible causes of capacity attenuation of Li-ion batteries,...

more

Important performance of the battery

Sep , 04 2023

1, electrical performance: (1) Rated capacity: 0.5C discharge, single battery discharge time is not less than 2h, battery pack discharge time is not less than 108min (95%); (2) 1C discharge capacity: 1C discharge, single battery discharge time is not less than 57min (95%), battery pack discharge time is not less than 54min (90%); (3) Low temperature discharge capacity: 0.5C discharge at -20℃, the ...

more

Why only online UPS topology provides mission critical load protection

Sep , 09 2023

Why does only online UPS topology provides mission critical load protection? Modern, static UPS systems are broadly classified into three design architectures: on-line, off-line and line interactive. This post describes and compares the three types and explains why – for truly critical loads – online ups topology is the only acceptable approach. Facility executives today face increased demands for...

more

Ground Design

Nov , 10 2023

1、Introduction In the process of circuit design, grounding is a commonplace issue. The grounding method needs to be based on specific usage scenarios, and there is no universal grounding method. In this article, we will explain the essence of grounding issues, which is worth savoring carefully. 2、Classification of grounding The same hardware circuit may also have differences in grounding methods i...

more

Causes and prevention of lead-acid battery bulge

Nov , 25 2023

1. The battery is bulging 1.1 Causes 1) Overcharge 2) Ambient high temperature 3) Thermal runaway 4) Individual monomers in the series circuit are not found in time, resulting in overcharging of other batteries 1.2 Prevention 1) The BSB system is installed to intelligently manage the charging of the battery itself and effectively prevent the overcharging of the battery. 2) Secondly, the BMS system...

more

Working principle of lead-acid battery

Dec , 23 2023

1. The generation of electromotive force of lead-acid batteries After the lead-acid battery is charged, the positive plate lead dioxide (PbO2), under the action of water molecules in the sulfuric acid solution, a small amount of lead dioxide and water produce dissociable unstable substances - lead hydroxide (Pb (OH) 4), hydroxide ions in the solution, lead ions (Pb4) remain on the positive plate, ...

more

Comparison of grid-connected, off-grid and hybrid systems

Jan , 06 2024

There are three types of solar panel systems: grid-tied (on-grid), off-grid, and hybrid solar systems. Each type of system has a unique setup that affects what equipment is used, the complexity of installation, and, most crucially, your potential costs and savings. What would be the best in your situation? Let’s take a closer look at the benefits and downsides of grid-tied, off-grid and hybrid sol...

more