China lead acid accumulator,Competitive Price lead acid accumulator

Lead-acid battery characteristics

Feb , 24 2023

Ⅰ： Electromotive force, internal resistance and terminal voltage of lead-acid battery: 1): Electromotive force: refers to the potential difference between the two poles, which depends on the relative density and temperature of the electrolyte.The relative density temperature coefficient of lead-acid battery is 0.00075, that is, the relative density decreases by 0.00075 when the electrolyte tempera...

more

Effect of ambient temperature on battery life

Mar , 01 2023

1）Temperature will affect battery capacity At different temperatures, the viscosity of the sulfuric acid solution in the battery will be inconsistent. For example, when the battery is at a temperature below 0°C, as the temperature decreases, the resistance of the sulfuric acid solution will continue to increase, which will directly increase the weight of the electrode. The effect of polarization, ...

more

What are the factors that are unfavorable to lead-acid batteries?

Apr , 15 2023

There are many factors that are unfavorable to the battery, mainly in the charging and discharging phase. (1). The "second super" discharge stage is mainly the discharge current overvalue, that is, the discharge exceeds the allowable current value for a long time; the second problem of discharge is over-discharge, that is, exceeding the allowable discharge capacity of the battery, which is called ...

more

Three-stage charging of lead-acid battery

Apr , 15 2023

1. What is the three-stage charging of lead-acid batteries? The charging method of lead-acid batteries should be divided into three stages, namely: constant current charging - constant voltage charging - trickle charging. Constant current charging stage: charge to 13.4V with 0.2C10 A current. Constant voltage charging stage: 2.4V/cell, charging time 3h, cut-off current 0.02C10A Trickle charge phas...

more

What are the reasons for the sulfation of lead-acid battery plates?

Apr , 15 2023

The reasons for plate sulfation are as follows: 1) The initial charging of the battery is insufficient or the initial charging interruption time is long; 2) The battery is insufficiently charged for a long time; 3) Failure to charge in time after discharge; 4) Frequent overcharging or low current deep discharge; 5) If the density of the electrolyte is too high or the temperature is too high, lead ...

more

Preparation of reduced graphene oxide loaded lead oxide composites for lead carbon batteries

Jun , 07 2023

Graphene is a new type of two-dimensional structure conductive material, which is composed of a single layer of carbon atoms and its basic structural unit is a six-membered ring structure, which has good chemical stability. Moreover, graphene has a high specific surface area, which not only provides a large reaction interface, but also improves the dispersion of surface nanomaterials. The high con...

more

Preparation of lead-reduced graphene oxide nanocomposites and their applications

Jun , 14 2023

The shortcomings of lead-acid batteries are: low energy density and short cycle life. Lead sulfate formed by the negative plate of the lead-acid battery during the discharge process, after the battery is placed, the small particles of lead sulfate will be converted into large particles of lead sulfate, and the large particles of lead sulfate will not be converted into lead during the charging proc...

more

Why Choose a Lithium-Ion UPS Battery?

Jun , 21 2023

Although lithium-ion UPS systems have been around for decades, most people have been hesitant to choose this option because they were more expensive. With the onset of advanced battery technology, lithium-ion UPS systems have become much more attractive due to reduced pricing that rivals most standard, lead-acid battery UPS systems. UPS systems feature a state-of-the-art lithium iron phosphate (Li...

more

Selection of lead carbon-carbon addition

Jun , 30 2023

The influence of chemical properties such as carbon material type and addition amount on battery performance was studied. Several different types of carbon materials (graphite, carbon black, activated carbon, etc.) were selected and tested for their effects on the negative electrode plate with additional amounts ranging from 0.2% to 4%, as well as hydrogen evolution inhibitors and adhesives. And c...

more

Effect of carbon black content on negative electrode performance of lead-acid battery

Aug , 04 2023

VRLA battery is not ideal in electric vehicles because of its short life under deep charge and discharge cycle conditions. In recent years, with the improvement of positive plate grid materials, the cycle life of batteries has been improved, and the main reason for the failure of VRLA batteries for electric vehicles is the sulfation of the negative electrode. To this end, there are more studies on...

more

Characteristics and principle of OPzV colloidal battery

Aug , 09 2023

OPzV is made of high-purity nano-scale materials, which can greatly extend the battery life: Principles and features: (1) can effectively inhibit the delamination of lead-acid battery electrolyte, dendrite short circuit and other problems. (2) The adsorption of colloid reduces the supersaturation of PbSO4 and produces loose porous PbSO4: (3) Delay the formation of PbSO4 dense crystalline layer and...

more

Why choose gel batteries?

Aug , 22 2023

The colloidal lead-acid battery is an improvement of the ordinary lead-acid battery with liquid electrolyte. The sulfuric acid electrolyte is replaced by a colloidal electrolyte, and the safety, power storage, discharge performance, and service life are improved compared with the ordinary battery. The colloidal lead-acid battery adopts a gel-like electrolyte; no free liquid is inside. Under the sa...

more