| MODEL |
PL31 RM10KL |
PL31 RM15KL |
PL31 RM20KL |
| Capacity |
10kVA/10kW |
15kVA/15kW |
20kVA/20kW |
| Phase |
3-Phase in/1 Phase out |
| INPUT |
| Nominal Voltage |
380/400/415Vac (L-L voltage), 3Ph+N+PE |
| Input Voltage Range |
190~520Vac (L-L voltage) |
| Input Frequency Range |
50/60±6Hz |
| Input Power Factor |
>0.99 |
| Input Current Distortion (THDi) |
≤5% |
| Bypass Voltage Range |
-40%~20% of nominal voltage, adjustable |
| OUTPUT |
| Nominal Votage |
208/220/230/240Vac, L+N+PE |
| Voltage Regulation |
± 1 % |
| Nominal Frequency |
50/60Hz, adjustable |
| Output Frequency |
Line mode:50/60±1/2/3/4/5Hz, adjustable; battery mode: 50/60±0.01 Hz |
| Output Power Factor |
1 |
| Voltage Distortion (THDu) |
≤2%@linear load; ≤5%@non-linear load |
| Transfer Time |
Line mode to Battery mode, 0ms; Inverter to Bypass, 0ms (Synchronized); Bypass to Inverter,
0ms(Synchronized); ECO to Battery Mode, 2ms (Typical Time)
|
| Crest Ratio |
3:1 |
Overload Capacity
(Normal Mode) |
30 min @ 102%~110% load;
10 min @ 110%~130% load;
30s @130%~150% load;
500 ms @ >150% load
|
Overload Capacity
(Battery Mode) |
10 min @ 102%~110% load;
1 min @ 110%~130% load;
10s @130%~150% load;
500 ms @ >150% load
|
| Output Short Circuit Protection |
Line Mode: Current limitation; Battery Mode: Current limitation; Bypass Mode: Breaker |
| BATTERY |
| Battery Type |
Sealed lead acid maintanance free |
| Nominal Voltage |
192~240Vdc, adjustable |
| Charging Voltage |
Floating Charge, 2.25V/cell; Boost Charge, 2.35V/cell |
| Battery Number&Capacity |
External |
| Charging Current |
1~12A, adjustable |
| Charging Mode |
Two Satges (CC/Floating) or Three Stages （CC/CV/Floating, adjustable) |
| Typical Recharge Time |
Depending on the capacity of external batteries |
| Battery Protection |
Battery Leakage＜500µA, Over Voltage Protection, Under Voltage Protection,
Over Current Protection; Battery Deep Discharge Protection
|
| EFFICIENCY |
| Line Mode |
94% (Max) |
| Battery Mode |
92% (Max) |
| ECO Mode |
98% (Max) |
| INDICATORS |
| LCD Panel |
UPS status, Battery Level, Load Level, Input/Outpt/Battery Voltage, Fault&Alarm Code |
| Audible Alarm |
Utility Failure, Battery Voltage Low, Overload, System Fault |
| MANAGEMENT |
| Interface |
RS232, USB, Parallel Card, EPO Port, SNMP Card (Optional), Relay Card (Optional) |
| ENVIRONMENT |
| Operating Temperature |
0~40 ℃ |
| Operating Humidity |
0~95% RH, non-condensing |
| Storage Temperature |
-15~60℃ （Battery: 0-40 ℃） |
| Altitude |
<1000m, derating 1% per 100m from 1000 ～ 2000m |
| Noise (1Meter away) |
＜60dB |
| PHYSICAL |
| Dimension（W*D*H, unit:mm) |
440*651*173 |
| Net Weight (kg) |
35 |
36 |
37 |
| Color |
Black ( RAL9004) |
| STANDARDS |
| Safety |
IEC 62040-1:2017 |
| EMC |
IEC 62040-2:2018 |
| Performance |
IEC 62040-3:2011 |
| Battery |
IEC 60896-22:2004 |
IPv6 network supported 